You are not registered yet. Please click here to register!
Burning in DFI NF4 UltraD + Corsair Twinx1024-4400C25 - Page 6 - i4memory.com - different look at memory
Tags Register Blogs FAQ Members List Calendar Mark Forums Read

Notices

Reply
 
Thread Tools
Old 16-05-2005, 08:36 PM   #41
dinos22
Senior Member
dinos22's PC Specs
 
Join Date: Mar 26 2005
Location: Sydney
Posts: 9,825
ok just did your gskill settings eva after clearing cmos


looks like i am using official 310 bios.....timings are 2.5-4-4-8....

the system will just reboot every time it gets to first start up screen when it checks cmos....sometimes jjust goes to start memtest and reboots

i tried changing a few settings one by one and putting them back if no change.....voltages (cpu, ldt, chipset),drive strength and data drive strength, multiplier

i noticed image corruption subsided a bit....almost not there....what setting could it be that is rebooting it

By eva2000
list all your settings in bios including the full set of settings listed at http://i4memory.com/showthread.php?t=459 from chipset voltage down to 32bit granuality etc
dinos22 is offline   Reply With Quote
Old 17-05-2005, 01:07 AM   #42
ZoKi
Senior Member
ZoKi's PC Specs
 
Join Date: Apr 29 2005
Location: Sydney
Posts: 253
MY GOD. I just ran memtest65+ 1.55 for 5.5hours while i was at work and i did not get even one error after 18passes
ZoKi is offline   Reply With Quote
Old 17-05-2005, 01:34 AM   #43
dinos22
Senior Member
dinos22's PC Specs
 
Join Date: Mar 26 2005
Location: Sydney
Posts: 9,825
zoki (zoran or what)...can you post your bios settings and a64 tweaker screen....that is tops BTW....you mentioned on dfi-street u were using 520-2 bios right?

By ZoKi
MY GOD. I just ran memtest65+ 1.55 for 5.5hours while i was at work and i did not get even one error after 18passes
dinos22 is offline   Reply With Quote
Old 17-05-2005, 01:42 AM   #44
blackjok3r
Senior Member
blackjok3r's PC Specs
 
Join Date: Feb 03 2005
Location: Stoneville, Perth WA
Posts: 899
dinos22 have you tried playing with drive strengh. I thaught it was a pretty insignoficant setting but turned out to be very important to get those few extra MHz, at lower voltage. TCCD's are supposed to like driver strengths of 1, 2, 4, 7. (I think) try those out. Copying other ppls tmings isnt a good idea because your ram may not be able to handle it. trfc is another important setting try with trfc = 15 or 16.
blackjok3r is offline   Reply With Quote
Old 17-05-2005, 01:50 AM   #45
ZoKi
Senior Member
ZoKi's PC Specs
 
Join Date: Apr 29 2005
Location: Sydney
Posts: 253
sure



this is in order from top to bottom dnt know all the names for them

cpc: enabled
cas: 2.0
trcd: 2
Tras: 6
tcp: 2
trc: 12
trfc: 16
trrd: 3
Twr: 2
twtr: 2
trwt: 3
Tref: 3120
Twcl: 01
Bank interleave: Enabled
skew: increase
value: 128
drive streagth: 8
" " : 1
7.0ns
5.0ns
dynamic counteR: 16
Disabled
16x
7x
Disabled

Last edited by ZoKi; 17-05-2005 at 01:52 AM.
ZoKi is offline   Reply With Quote
Old 17-05-2005, 11:59 AM   #46
dinos22
Senior Member
dinos22's PC Specs
 
Join Date: Mar 26 2005
Location: Sydney
Posts: 9,825
BREAKTHROUGH....got some results finally

ok well it was i donno 2 or 3am this morning....me and babydude were still up (keen) messing with our computers...when i came to realise i am a complete ****head......i've been trying to apply TCCD timings to my UTT ram.....i looked at the sticks sitting on my desk by accident and realised i had the wrong sticks installed for the job....well for the settings i was trying to work with TCCD.......

and then i push the wrong n00b button and voila....the damn thing worked .... well 5.5hours of test#8 produced 113 errors which were all between loop 6-13.....and there was a couple of errors on loop 86 and loop 136 i think.....me thinks that's good enough......test#5 no probs.....as i mentioned before i was able to push past 290 before i got any errors in test#5.....so i need to tweak for stability and tighter timings now.....OK here it is

DIVIDERS DON'T work.....errors and instability present.....9:10 is only Test#8 issue.....so need more tweaking (300FSB....270RAM...didn't like SuperPI)....while 166 divider is a blue-screener

I have 3 goals now:
1) There is more heatroom to tweak for stability
2) I want tighter timings
3) I want 9:10 multiplier to work with tighter timings

I NEED YOUR HELP TO TWEAK THIS BASTARD PLEASE......ALL HELP MUCH APPRECIATED

System
A64 3000+ CBBHD 0447UPDW Winchester 90nm cpu air cooled (Freezer64)
Corsair Twinx1024-4400C25 (80mm fan blowing on top....working on 100CFM 21dba solution ATM...will do a post if it works out)
DFI UT nF4 Ultra-D 331-3 beta bios
Xpertvision 6600GT
80GB Seagate 7200.7
LG DVDRW(DL)
400W Antec SL400 PSU (20-pin with coverter)

WinXP PRO SP2 fresh install
Latest nVidia chipset and VGA drivers

9x 275mhz 2.5-4-4-8 12-14-2224 at 2.8v vdimm

CPU VID Control = 1.325V
CPU VID Special Control = 123%
chipset = 1.7v
LDT = 1.5v
LDT 3x

CPC = Enabled
CAS Latency(CL) = 2.5
RAS to CAS(Trcd) = 4
Min RAS# Active time(Tras) = 8
Row Precharge Time(Trp) = 4
Row Cycle Time(Trc) = 12
Row Refresh Cycle Time(Trfc) = 14
Row to Row Delay(Trrd) = 2
Write Recovery Time(Twr) = 2
Write to Read Delay(Twtr) = 2
Read to Write Delay(Trwt) = 4
Refresh Period (Tref) = 3120
Write CAS Latency(Twcl) = Auto
DRAM Bank Interleave = Enabled
Skew = AUTO
Skew Value = 0
DRAM Drive Strength = Level 7
DRAM Data Drive Strength = Level 3
Max Async Latency = 7ns
Read Preamble Time = 5ns
Idle Cycle Limit = 256
Dynamic Counter = Disable
R/W Queue Bypass = 8x
Bypass Max = 4x
32 byte Granularity = Disable(8burst)

Last edited by dinos22; 20-05-2005 at 03:27 AM.
dinos22 is offline   Reply With Quote
Old 17-05-2005, 07:35 PM   #47
blackjok3r
Senior Member
blackjok3r's PC Specs
 
Join Date: Feb 03 2005
Location: Stoneville, Perth WA
Posts: 899
Lol
blackjok3r is offline   Reply With Quote
Old 17-05-2005, 08:20 PM   #48
dinos22
Senior Member
dinos22's PC Specs
 
Join Date: Mar 26 2005
Location: Sydney
Posts: 9,825
screenie No#1

dinos22 is offline   Reply With Quote
Reply

Bookmarks

Tags
burning, corsair, dfi, nf4, twinxc25, ultrad


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools


Similar Threads for: Burning in DFI NF4 UltraD + Corsair Twinx1024-4400C25
Thread Thread Starter Forum Replies Last Post
AMD64 Overclocking Guide (07/11/06) eva2000 General AMD Motherboards / CPU 7 02-11-2006 05:42 PM
My 4x512mb Corsair adventures on a DFI Nf4 Annihilator69 Corsair DDR1 on AMD 20 03-08-2006 08:29 PM
cooling the ocz vx and dfi nf4 ultrad joelam65 OCZ DDR1 on AMD 24 15-05-2005 09:38 PM
Corsair XMS3200C2v1.1 BH-6 + DFI NF4 SLI-D eva2000 Corsair DDR1 on AMD 6 01-05-2005 02:52 PM
[news] OCZ PC5000 Platinum DFI NF4 Special series released eva2000 Reviews & News Online 7 10-04-2005 07:51 PM


All times are GMT +11. The time now is 03:22 AM.

no new posts