You are not registered yet. Please click here to register!
OCZ PC3200 Gold new BH5 die + DFI NF4 SLI-D Part2 - i4memory.com - different look at memory
Tags Register Blogs FAQ Members List Calendar Mark Forums Read

Notices

Reply
 
Thread Tools
Old 03-05-2005, 02:53 AM   #1
eva2000
Administrator
eva2000's PC Specs
 
Join Date: Jul 22 2004
Location: Brisbane, Australia
Posts: 23,011
twitter.com/i4memorycom Facebook Page livestream.com/i4memorycom
Blog Entries: 42
Cool OCZ PC3200 Gold new BH5 die + DFI NF4 SLI-D Part2

New results on different cpu for 2x 512MB OCZ PC3200 Gold with the new BH5 dies. Original results at http://i4memory.com/showthread.php?t=415

1. changed cpus from 3500+ CAA2C Clawahammer to 3200+ winnie
2. changed bios from 310 official to 414-3 beta bios allowed me to use Bank Interleave Enabled
3. changed psu from 580W Topower 686P6 to 650 Silverstone PCI-E SLI psu
4. change Forceware drivers from 76.10 to 71.89WHL
5. change everest home from 2.00.292 beta to 2.00.323 beta

The product link is at http://www.ocztechnology.com/product...l_channel_gold



System:
3200+ CBBHD 0445 VPMW water cooled
DFI NF4 SLI-D 414-3 official bios
2x eVGA 6800U PCI-E SLI mode with 71.89WHL drivers
120GB WD 1200JB
Pioneer A05 Burner
650W Silverston Zeus ST65ZF PCI-E SLI psu
WinXP PRO SP2

- note SLI mode will probably reduce cpu related performance slightly so take that into a/c with the benchmark results.

2x 512MB OCZ PC3200 Gold new BH-5 die dual channel kit

@10x 260mhz 2-2-2-5 7-16-3-3-1-2 at 3.6v


chipset = 1.6v
LDT = 1.5v
LDT 4x

CPC = Enabled
CAS Latency(CL) = 2
RAS to CAS(Trcd) = 2
Min RAS# Active time(Tras) = 5
Row Precharge Time(Trp) = 2
Row Cycle Time(Trc) = 7
Row Refresh Cycle Time(Trfc) = 16
Row to Row Delay(Trrd) = 3
Write Recovery Time(Twr) = 3
Write to Read Delay(Twtr) = 1
Read to Write Delay(Trwt) = 2
Refresh Period (Tref) = 0648
Write CAS Latency(Twcl) = Auto
DRAM Bank Interleave = Enabled
Skew = AUTO
Skew Value = 0
DRAM Drive Strength = Level 3
DRAM Data Drive Strength = Level 1
Max Async Latency = 7ns
Read Preamble Time = 5ns
Idle Cycle Limit = 256
Dynamic Counter = Enabled
R/W Queue Bypass = 16x
Bypass Max = 7x
32 byte Granularity = Disable(8burst)

Sandra 2005 Lite
Buffered = 7,355 / 7,293
Unbuffered = 3,573 / 3,781

Everest Home
Read = 7,669
Write = 3,103
Latency = 33.9 ns

Pcmark04 = 4,926
Pcmark04 Memory = 6,651

Hexus Pifast = 45.19s

SuperPi
1M = 32.082s
8M = 5min 46.285s
16M = 13min 08.479s
32M = 28min 37.046s

3dmark2003
@425/1100 stock speeds


Last edited by eva2000; 03-05-2005 at 11:13 AM.
eva2000 is offline   Reply With Quote
Old 03-05-2005, 08:29 AM   #2
1234
Member
1234's PC Specs
 
Join Date: Sep 13 2004
Posts: 74
sweet! i should get my msi board this week. can test out my stuff, similar setup with an early 3200+ win.

only air though. thinking of going H20, zalman reserator, just looks cool - nothing extreme. have you had one of them?

1234
1234 is offline   Reply With Quote
Old 03-05-2005, 09:06 AM   #3
eva2000
Administrator
eva2000's PC Specs
 
Join Date: Jul 22 2004
Location: Brisbane, Australia
Posts: 23,011
twitter.com/i4memorycom Facebook Page livestream.com/i4memorycom
Blog Entries: 42
I only water cool my cpu and I have used

1. my G4 Storm/MCP650/Thermochill 120.3 or
2. MCW6002/MCP600/MCP650/Thermochill 120.3 or
3. Corsair Hydrocool 200 external unit.. never used zalman reserator but hear it ain't that good

There's no way i'm going back to air hehe
eva2000 is offline   Reply With Quote
Old 03-05-2005, 10:41 AM   #4
T_M
Senior Member
T_M's PC Specs
 
Join Date: Dec 07 2004
Location: Jakarta
Posts: 5,335
By eva2000
@10x 260mhz 2-2-2-6 7-16-3-3-1-2 at 3.6v
That tRAS should be 5
T_M is offline   Reply With Quote
Old 03-05-2005, 11:13 AM   #5
eva2000
Administrator
eva2000's PC Specs
 
Join Date: Jul 22 2004
Location: Brisbane, Australia
Posts: 23,011
twitter.com/i4memorycom Facebook Page livestream.com/i4memorycom
Blog Entries: 42
doh typo
eva2000 is offline   Reply With Quote
Old 03-05-2005, 06:34 PM   #6
1234
Member
1234's PC Specs
 
Join Date: Sep 13 2004
Posts: 74
yeah i have heard that too about zalman reserator - no fans so i wouldn't expect much, i think it was marketed as a quiet cooling system. i'm in no hurry, might buy components over period of time.

1234
1234 is offline   Reply With Quote
Old 03-05-2005, 06:44 PM   #7
KingYubbo
Senior Member
KingYubbo's PC Specs
 
Join Date: Mar 11 2005
Posts: 761
This is the kind of time that you just wish that you had as much knowledge as eva2000
KingYubbo is offline   Reply With Quote
Old 03-05-2005, 08:35 PM   #8
Statts
Senior Member
Statts's PC Specs
 
Join Date: May 03 2005
Location: Adelaide, SA
Posts: 102
are you actively cooling this ram at 3.6v?

Chris
Statts is offline   Reply With Quote
Reply

Bookmarks

Tags
bh5, dfi, die, gold, nf4, ocz, part2, pc3200, slid


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools


Similar Threads for: OCZ PC3200 Gold new BH5 die + DFI NF4 SLI-D Part2
Thread Thread Starter Forum Replies Last Post
**i4memory SuperPI Mod v1.4 Rankings** T_M General Benchmarks 1006 07-08-2006 01:54 PM
DFI NF4 Ultra-D + OCZ Gold C2 PC3200 (TCC5) mute OCZ DDR1 on AMD 15 14-02-2006 09:04 PM
OCZ PC3200 Gold new BH5 die + DFI NF4 SLI-D eva2000 OCZ DDR1 on AMD 73 16-08-2005 02:31 AM
[news] OCZ PC5000 Platinum DFI NF4 Special series released eva2000 Reviews & News Online 7 10-04-2005 06:51 PM


All times are GMT +11. The time now is 06:14 AM.

no new posts