You are not registered yet. Please click here to register!
Asus R.O.G. Blitz Formula SE (DDR2) / Blitz Extreme (DDR3) - 2 phase DDR preview - Page 17 - i4memory.com - different look at memory
Tags Register Blogs FAQ Members List Calendar Mark Forums Read

Notices

Reply
 
Thread Tools
Old 04-09-2007, 07:02 PM   #129
Angelus
Junior Member
Angelus's PC Specs
 
Join Date: Sep 04 2007
Posts: 5
Re: Asus R.O.G. Blitz Formula SE (DDR2) / Blitz Extreme (DDR3) - 2 phase DDR preview

Thanks for replying, eva
My system specs:
C2D E6750 L723A337
mobo Blitz Formula SE
2x1GB Super Talent T800UX2GC4 DDR2 800 4-4-3-8
CPU cooling: Tuniq tower 120
PSU: Cooler Master I-Green 600W
BIOS settings:
Extreme Tweaker
AI Overlocking: Manual
CPU Ratio Control: Manual
--- Ratio CMOS Setting: 8
FSB Strap to North Bridge: AUTO
FSB Frequency: 450
PCIE Frequency: 100
DRAM Frequency: DDR2-900
DRAM Command Rate: 2T
DRAM Timing Control: Manual
---CAS# Latency: 4
---RAS# to CAS# Delay: 4
---RAS# Precharge: 3
---RAS# Active Time: 8
---RAS# to RAS# Delay: AUTO
---Row Refesh Cycle Time: AUTO
---Write Recovery Time: AUTO
---Write to Read Delay: AUTO
---Read to Precharge Time: AUTO
DRAM Static Read Control: Disable

Tramsaction Booster: AUTO
--- Boost Level:

CPU Spread Spectrum: Disabled
PCIE Spread Spectrum: Disabled

CPU Voltage: 1.500V
CPU Voltage Reference: AUTO
Loadline Calibratiom: Enabled
FSB Termination Voltage: 1.3V
North Bridge Voltage: 1.31V
North Bridge Reference: AUTO
DRAM Voltage: 2.20v
-DDRII Channel A Ref Voltage: AUTO
-DDRII Channel B Ref Voltage: AUTO
-DDRII Controller Ref Voltage: AUTO
South Bridge Voltage: AUTO
PLL Voltage: AUTO
NB LED Selection: NB Volt
SB LED Selection: PLL Volt

CPU Configuration
<All disable>
I tried both the white and blue dimm slots, same result. By increased V-core to 1.5500V (in BIOS), it seem to be stable Prime95 (1 hour so far), may be not about memory stability issue. That's not really good, my old P5K Deluxe can do it with 1.5V!! This board seem to be a v-core eater!

/Even if can not pass Prime for a minute, I can work and play game with those settings day by day without having any problem (system crash, dumping physical memory, etc...). I have used some boards before, such as 965P-DS3, P5B Deluxe, P5K Deluxe and I had an experience that if the system fails Prime test in a few minutes, it can not run any heavy task like game and 3DMax render! So can you give me an advice?
Angelus is offline   Reply With Quote
Old 05-09-2007, 05:24 PM   #130
eva2000
Administrator
eva2000's PC Specs
 
Join Date: Jul 22 2004
Location: Brisbane, Australia
Posts: 23,010
twitter.com/i4memorycom Facebook Page livestream.com/i4memorycom
Blog Entries: 42
Re: Asus R.O.G. Blitz Formula SE (DDR2) / Blitz Extreme (DDR3) - 2 phase DDR preview

Problem is probably low NB volts at 1.31v try raising it to 1.45-1.55v and manually setting subtimings. You might need to bump FSB volts from 1.3v to say 1.35v or something
eva2000 is offline   Reply With Quote
Old 06-09-2007, 10:26 AM   #131
wazzer96
Senior Member
wazzer96's PC Specs
 
Join Date: Jul 20 2007
Posts: 272
Re: Asus R.O.G. Blitz Formula SE (DDR2) / Blitz Extreme (DDR3) - 2 phase DDR preview

guess you guys already know about this:

http://www.scorptec.com.au/product/23351/

Edit: Just noticed it finally hit USA today

http://www.clubit.com/product_detail...emno=CA4802834
Clubit is a very large (and fast) vendor.

Last edited by wazzer96; 06-09-2007 at 10:30 AM.
wazzer96 is offline   Reply With Quote
Old 06-09-2007, 12:24 PM   #132
Angelus
Junior Member
Angelus's PC Specs
 
Join Date: Sep 04 2007
Posts: 5
Re: Asus R.O.G. Blitz Formula SE (DDR2) / Blitz Extreme (DDR3) - 2 phase DDR preview

Had a try! Rise NB Voltage to 1.55, FSBT Voltage to 1.35, but it still fails Orthos after a few minutes (BSoD), the only way to solve this problem that I found is to rise v-core to 1.53725V in BIOS / 1.5200 Idle / 1.5120 load. A bit disappointment to me, this mobo need more v-core than the P5k Dlx to make my E6750 stable at 3.6Ghz (450x8). Hope it'll overclock Penryn well!
Angelus is offline   Reply With Quote
Old 07-09-2007, 09:00 PM   #133
Lane
Senior Member
Lane's PC Specs
 
Join Date: Oct 06 2005
Location: Switzerland
Posts: 440
Re: Asus R.O.G. Blitz Formula SE (DDR2) / Blitz Extreme (DDR3) - 2 phase DDR preview

I was seriously think to buy the Formula before my E6700 was dead, Now i know i need it for my E6850, any advice should i wait the X38 before take a decision?

We know the bios will certainly need some version for be mature, anyway i have work a lot with newer board, and little bug are not really a problem

I have build my Vapo today with my E6850, but i will be limited on FSB and more by some divider give no boot ( example 460x9 11xxmhz on DDR)..

" Nothing to do with this, but i was testing CPU with the last version of SandraSys, and they have add the result of FX76,( for recall, it's 2x FX76 dual core on a dual socket motherboard..) and i m really suprise of the result compared to a QX6800:
FX76: 38'855 Mflops
QX6800: 36'883 Mflops

Last edited by Lane; 07-09-2007 at 09:19 PM.
Lane is offline   Reply With Quote
Old 07-09-2007, 10:55 PM   #134
eva2000
Administrator
eva2000's PC Specs
 
Join Date: Jul 22 2004
Location: Brisbane, Australia
Posts: 23,010
twitter.com/i4memorycom Facebook Page livestream.com/i4memorycom
Blog Entries: 42
Re: Asus R.O.G. Blitz Formula SE (DDR2) / Blitz Extreme (DDR3) - 2 phase DDR preview

By Angelus View Post
Had a try! Rise NB Voltage to 1.55, FSBT Voltage to 1.35, but it still fails Orthos after a few minutes (BSoD), the only way to solve this problem that I found is to rise v-core to 1.53725V in BIOS / 1.5200 Idle / 1.5120 load. A bit disappointment to me, this mobo need more v-core than the P5k Dlx to make my E6750 stable at 3.6Ghz (450x8). Hope it'll overclock Penryn well!
did you enable loadline calibration to prevent vcore droop ?

By Lane View Post
I was seriously think to buy the Formula before my E6700 was dead, Now i know i need it for my E6850, any advice should i wait the X38 before take a decision?

We know the bios will certainly need some version for be mature, anyway i have work a lot with newer board, and little bug are not really a problem

I have build my Vapo today with my E6850, but i will be limited on FSB and more by some divider give no boot ( example 460x9 11xxmhz on DDR)..

" Nothing to do with this, but i was testing CPU with the last version of SandraSys, and they have add the result of FX76,( for recall, it's 2x FX76 dual core on a dual socket motherboard..) and i m really suprise of the result compared to a QX6800:
FX76: 38'855 Mflops
QX6800: 36'883 Mflops
might as well wait for X38 if you're on the fence right now
eva2000 is offline   Reply With Quote
Old 07-09-2007, 11:16 PM   #135
Angelus
Junior Member
Angelus's PC Specs
 
Join Date: Sep 04 2007
Posts: 5
Re: Asus R.O.G. Blitz Formula SE (DDR2) / Blitz Extreme (DDR3) - 2 phase DDR preview

By eva2000 View Post
did you enable loadline calibration to prevent vcore droop ?
Yes! This option look like "CPU V-core Damper" in P5K series, and I always remember to use this!
Angelus is offline   Reply With Quote
Old 08-09-2007, 10:16 PM   #136
Lane
Senior Member
Lane's PC Specs
 
Join Date: Oct 06 2005
Location: Switzerland
Posts: 440
Re: Asus R.O.G. Blitz Formula SE (DDR2) / Blitz Extreme (DDR3) - 2 phase DDR preview

Yes, but i don't know exactly from where it comes.. anyway you remember sometimes ago i have kill my P5W64 and replace it.. same rev ( there's no revision change for P5W64) and with the E6700, i have not really try max FSB with the new .. , i have switch for last , so the max 470mhz ( boot and SPI) a long time ago on my older P5W64 is perhaps no more valid with this board, or again bios can be a problem, i need try see if 402 and 502 bios give me better result. ( last is 903, and it what i use right now.)..

Will see, but there's not a lot of luck the result will be impressive on this board with a multi locked at 9 max..

I know me well, and if a morning, i m tired of a bad OC, i will send a phone to a friend shop and order a Blitz...
Lane is offline   Reply With Quote
Reply

Bookmarks

Tags
asus, blitz, ddr, ddr2, ddr3, extreme, formula, phase, preview, rog


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools


Similar Threads for: Asus R.O.G. Blitz Formula SE (DDR2) / Blitz Extreme (DDR3) - 2 phase DDR preview
Thread Thread Starter Forum Replies Last Post
i5 670 & ASUS P7P55D-DELUXE Motherboard 2D review Uncle Fester Asus Intel motherboards / CPU 9 18-03-2010 07:41 AM
DDR2 Full Specs List GoriLLakoS DDR2 Intel Memory 48 02-08-2008 02:51 AM
Asus Blitz Formula 1504 beta / Blitz Extreme 1007 beta eva2000 Asus Intel motherboards / CPU 37 12-05-2008 03:45 AM
Intel Core 2 E6750 + Asus Blitz Formula SE Adventure eva2000 Asus Intel motherboards / CPU 15 27-07-2007 04:08 PM
DDR1 to DDR2 converter :eek: dinos22 General AMD DDR2 / DDR3 Memory 14 15-09-2006 09:32 AM


All times are GMT +11. The time now is 03:24 AM.

no new posts