You are not registered yet. Please click here to register!
E6600 B1 ES - aiming for 4500+ Mhz + Asus Commando - i4memory.com - different look at memory
Tags Register Blogs FAQ Members List Calendar Mark Forums Read

Notices

Reply
 
Thread Tools
Old 11-07-2007, 02:02 AM   #1
eva2000
Administrator
eva2000's PC Specs
 
Join Date: Jul 22 2004
Location: Brisbane, Australia
Posts: 23,017
twitter.com/i4memorycom Facebook Page livestream.com/i4memorycom
Blog Entries: 42
Cool E6600 B1 ES - aiming for 4500+ Mhz + Asus Commando

Swapped out my not so good E6700 L629B079 cpu and put in my E6600 B1 ES cpu (did 4150mhz at 1.66v max for 32M on Asus P5W DH on Swiftech G4 Storm/Thermochill 120.3/MCP650 water).

System
  • E6600 B1 ES (QPGE) VID = 1.275v
  • Kayl Black FrozenSS 1/4HP
  • Asus Commando 1001 bios
  • 128MB Gainward FX5200 PCI
  • 2x1GB Crucial Ballistix Tracer PC2-8500 naked modules cooled by 3x 60x25mm Sunon 23.5cfm Maglev fans
  • 160GB Seagate 7200.7 SATA
  • Pioneer DVR-08 Burner
  • Sony FDD
  • 620W Corsair HX620 Modular PSU
  • WinXP Pro SP2

At stock 9x266FSB 1.268v:

Room temp = 23.5C
Bios = -44.5C
Evap temp idle = -44.5C

Systool Dual 32M Pi tests
  • @9x456FSB = 4104Mhz at 1.5v bios (1.48v)
  • @9x467FSB = 4202Mhz at 1.55v bios (1.536v)
  • @9x478FSB = 4302Mhz at 1.60v bios (1.584v)
  • @9x480FSB = 4320Mhz at 1.65v bios (1.640v) - PC Probe2 = -13C load in windows / Evap load temp = -34.9C
  • @9x485FSB = 4367Mhz at 1.65v bios (1.640v)
  • @9x489FSB = 4401Mhz at 1.675v bios (1.664v) - PC Probe2 = -9C load in windows / Evap load temp = -33.4C

Systool Single 32M Pi tests
  • @9x493FSB = 4440Mhz at 1.675v bios (1.664v)
  • @9x496FSB = 4468Mhz at 1.675v bios (1.664v)
  • @9x500FSB = 4500Mhz at 1.675v bios (1.664v)
  • @9x504FSB = 4536Mhz at 1.675v bios (1.664v) - PC Probe2 = -13C load in windows / Evap load temp = -35.4C - reboot at 73% mark
eva2000 is offline   Reply With Quote
Old 11-07-2007, 02:02 AM   #2
eva2000
Administrator
eva2000's PC Specs
 
Join Date: Jul 22 2004
Location: Brisbane, Australia
Posts: 23,017
twitter.com/i4memorycom Facebook Page livestream.com/i4memorycom
Blog Entries: 42
Re: E6600 B1 ES - aiming for 4500+ Mhz + Asus Commando

Definitely B1 stepping is slower in Super Pi than B2 but not bad clocks @4490Mhz at 1.664v. Low memory clocks didn't help heh

Evap load = -34.6C @9x499FSB at 1.664v









Bios settings used:
Extreme Tweaker:
AI Tuning: Manual
CPU Frequency: 499FSB
DRAM Frequency: DDR2-998MHz (1:1 Divider)
PCI Express Frequency: 100
PCI Clock Synchronisation: 33.33
Spread Spectrum: Disabled
CPU Vcore Voltage: 1.675
FSB Termination Voltage: 1.4
NB Vcore: 1.625
Memory Voltage: 2.25
DDRII Channel A REF Voltage: Auto
DDRII Channel B REF Voltage: Auto
DDRII Controller REF Voltage: Auto
SB Vcore (SATA, PCIE): 1.6
SB Chipset Voltage: 1.225

Asus C.G.I.: Disabled
Static Read Control: Disabled
Configure DRAM Timing by SPD: Disabled
- DRAM CAS# Latency: 4
- DRAM RAS# to CAS# Delay: 4
- DRAM RAS# Precharge: 4
- DRAM RAS# Activate to Precharge: 5
- DRAM Write Recovery Time: 3
- DRAM TRFC: 30
- DRAM TRRD: 3
- Rank Write to Read Delay: 9
- Read to Precharge Delay: 6
- Write to Precharge Delay: 9

Legacy USB Support: Disabled

CPU Configuration
Modify Ratio Support: Enabled
- Ratio CMOS Setting: 9x
C1E Support: Disabled
Max CPUID Value Limit: Disabled
Vanderpool Technology: Disabled
CPU TM function: Disabled
Execute Disable Bit: Disabled
PECI: Disabled
eva2000 is offline   Reply With Quote
Old 11-07-2007, 02:02 AM   #3
eva2000
Administrator
eva2000's PC Specs
 
Join Date: Jul 22 2004
Location: Brisbane, Australia
Posts: 23,017
twitter.com/i4memorycom Facebook Page livestream.com/i4memorycom
Blog Entries: 42
Re: E6600 B1 ES - aiming for 4500+ Mhz + Asus Commando

Wprime 32M & 1024M
Wprime 1024M @9x490FSB at 1.664v = Evap load temp = -31.8C



Wprime 32M & 1024M
Wprime 1024M @9x490FSB at 1.664v = Evap load temp = -31.8C



Seems to be enough for 1M and cpuz validation @4500Mhz - 9x500FSB at 1.664v




Last edited by eva2000; 11-07-2007 at 03:11 AM.
eva2000 is offline   Reply With Quote
Old 12-07-2007, 01:52 AM   #4
eva2000
Administrator
eva2000's PC Specs
 
Join Date: Jul 22 2004
Location: Brisbane, Australia
Posts: 23,017
twitter.com/i4memorycom Facebook Page livestream.com/i4memorycom
Blog Entries: 42
Re: E6600 B1 ES - aiming for 4500+ Mhz + Asus Commando

E6600 QPGE B1 ES
Max FSB Frequency

Now to find out the my E6600 QPGE B1 ES cpu's max FSB frequency.

At 7x cpu multiplier and 5-5-5-9 timings, I managed maximum of 7x540FSB boot from bios into windows:

I used 540mhz 5-5-5-9 3-30-6-10-10-10 timings at 2.25v vdimm with vMCH at 1.65v and vFSB at 1.40v. Didn't bother with Super Pi 32M instead just ran Systool dual 32M Pi test and took screenie of Everest bandwidth and then jumped straight to 8x cpu multiplier



At 8x cpu multiplier and 4-4-4-9 timings, I managed maximum of 8x536FSB boot from bios into windows:

For 8x536FSB, I used 536mhz 4-4-4-9 5-30-5-10-10-10 timings at 2.40v vdimm with vMCH at 1.75v and vFSB at 1.40v.







Still slow times compared due to being B1 stepping compared with my E6700 B2 @8x532FSB 1:1 4-4-4-5
eva2000 is offline   Reply With Quote
Old 12-07-2007, 03:36 AM   #5
eva2000
Administrator
eva2000's PC Specs
 
Join Date: Jul 22 2004
Location: Brisbane, Australia
Posts: 23,017
twitter.com/i4memorycom Facebook Page livestream.com/i4memorycom
Blog Entries: 42
Re: E6600 B1 ES - aiming for 4500+ Mhz + Asus Commando

Finally, managed to get my E6600 QPGE B1 ES cpu to hit 4500Mhz with Super Pi 32M and 4536Mhz for 1M at 11.156s. Managed 4563Mhz for 1M at 11.094s but it rebooted when I was taking the screenshot

E6600 B1 ES

@4500Mhz - 9x500FSB 1:1 at 1.75v bios (1.696v)





@4536Mhz - 9x504FSB 1:1 at 1.75v bios (1.696v)



eva2000 is offline   Reply With Quote
Old 13-07-2007, 06:13 AM   #6
eva2000
Administrator
eva2000's PC Specs
 
Join Date: Jul 22 2004
Location: Brisbane, Australia
Posts: 23,017
twitter.com/i4memorycom Facebook Page livestream.com/i4memorycom
Blog Entries: 42
Re: E6600 B1 ES - aiming for 4500+ Mhz + Asus Commando

Swap out my 128MB Gainward FX5200 PCI for 640MB Gainward 8800GTS stock hsf video card and let's see how cpu scaling effects 3Dmark06 scores

System
  • E6600 B1 ES (QPGE) VID = 1.275v
  • Kayl Black FrozenSS 1/4HP
  • Asus Commando 1001 bios
  • 640MB Gainward 8800GTS stock hsf with 158.22 WHQL drivers
  • 2x1GB OCZ PC2-8000 Titanium Alpha VX2 cooled by 3x 60x25mm Sunon 23.5cfm Maglev fans
  • 160GB Seagate 7200.7 SATA
  • Pioneer DVR-08 Burner
  • Sony FDD
  • 620W Corsair HX620 Modular PSU
  • WinXP Pro SP2

640MB Gainward 8800GTS stock hsf @648/2000



@3600Mhz


@4006Mhz


@4416Mhz
Power-mate wattage meter read a peak of 383.7 watts pulled from mains power during 3dmark06 run

Room temp = 23.8C
Evap idle temp = -38.2C
Evap load temp = -32.0C



Easily broke 12k with dual core cpu
eva2000 is offline   Reply With Quote
Old 14-07-2007, 12:07 AM   #7
eva2000
Administrator
eva2000's PC Specs
 
Join Date: Jul 22 2004
Location: Brisbane, Australia
Posts: 23,017
twitter.com/i4memorycom Facebook Page livestream.com/i4memorycom
Blog Entries: 42
Re: E6600 B1 ES - aiming for 4500+ Mhz + Asus Commando

My highest PCmark05 score to do by nearly 800pts @14877



Look at this entry 15th global rank and 1st E6600 rank http://www.hwbot.org/result.do?resultId=623569

Also my highest 3Dmark benchmarks with single 640MB 8800GTS stock hsf score to date





eva2000 is offline   Reply With Quote
Old 18-07-2007, 03:07 AM   #8
eva2000
Administrator
eva2000's PC Specs
 
Join Date: Jul 22 2004
Location: Brisbane, Australia
Posts: 23,017
twitter.com/i4memorycom Facebook Page livestream.com/i4memorycom
Blog Entries: 42
Re: E6600 B1 ES - aiming for 4500+ Mhz + Asus Commando

Finally, got around to setting up the dedicated GPU water cooling loop for this card consisting of the following:

EK Acetal Full Cover GPU block -> Radiical Triple fan single pass Radiator -> Brass T-line -> Swiftech MCP655 powered by Kayl custom 100W relay switched psu -> back to EK Acetal Full Cover GPU block










stock speeds are @648/1512/2052 (bios flashed)

ATI Tool 0.27 beta2 Idle


ATI Tool 0.27 beta2 Load


Some eVGA 8800GTX runs @648/1512/2052

3dmark2003


3dmark05


3dmark06




Looks like the eVGA 8800GTX is bottlenecked at it's clock speeds of 648/1512/2052. Can't get GPU core higher probably GPU voltage limited at stock GPU volts.

3dmark2001



Aquamark3


Pcmark05
eva2000 is offline   Reply With Quote
Reply

Bookmarks

Tags
4500, aiming, asus, commando, e6600, mhz


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools


Similar Threads for: E6600 B1 ES - aiming for 4500+ Mhz + Asus Commando
Thread Thread Starter Forum Replies Last Post
i5 670 & ASUS P7P55D-DELUXE Motherboard 2D review Uncle Fester Asus Intel motherboards / CPU 9 18-03-2010 07:41 AM
[hwbot] CPU-Z pt2 hwbot HWBOT Official Rankings 31 22-09-2009 10:28 PM
[hwbot] Super Pi v1.50 - 1M rankings hwbot HWBOT Official Rankings 301 14-04-2008 01:18 PM
[hwbot] CPU-Z hwbot HWBOT Official Rankings 190 14-04-2008 01:06 PM
E6600 L709A958 @580FSB + Asus Commando eva2000 Asus Intel motherboards / CPU 38 15-08-2007 02:01 AM


All times are GMT +11. The time now is 05:32 AM.

no new posts