You are not registered yet. Please click here to register!
DFI Lanparty UT CFX3200-DR RD580 Crossfire motherboard review adventures - Page 2 - i4memory.com - different look at memory
Tags Register Blogs FAQ Members List Calendar Mark Forums Read

Notices

Reply
 
Thread Tools
Old 04-05-2006, 08:23 PM   #9
eva2000
Administrator
eva2000's PC Specs
 
Join Date: Jul 22 2004
Location: Brisbane, Australia
Posts: 23,015
twitter.com/i4memorycom Facebook Page livestream.com/i4memorycom
Blog Entries: 42
Next cpu to be plucked in = FX-60 CCB2E 0536RPMW

Cool night tonight room temp = 25.5C!

Cpu Idle = 27C
Cpu Load (dual stressprime) = 34-35C



here's 15x 200HTT = 3000Mhz



Woah this is already better than on my DFI NF4 boards for FX-60. 3119Mhz at 1.52v stressprime failed on cpu0 core after 2mins but this is way better than my DFI NF4 best of 3109Mhz at 1.6-1.616v.

Probably due to the better H20 cooling with Silverprop Cyclone SE/Radiical Triple fan single pass rad/MCP655 vs Corsair Hydrocool 200EX i guess

But nothing a little extra vcore couldn't fix = 3119Mhz at 1.552-1.568v



Definitely liking this board now both my FX-57 and FX-60 clocked better just a tad although better H20 cooling might be the reason heh

DFI NF4
FX-57 = 3109-3120Mhz at 1.6-1.616v higher vcore didn't help
FX-60 = 3109Mhz at 1.6-1.616v higher vcore didn't help

DFI CFX3200-DR
FX-57 = 3137Mhz at 1.616-1.64v
FX-60 = so far at 3119Mhz at 1.568v

Update:
Woah 3150Mhz at 1.584v cpu0 seems to be the weaker one heh



Added some raid info to first post as i changed to 4x SATA raid 0 for OS now and here's dual 32M at 3000Mhz






All round 32M recording breaking PBs for me with this board. Beat my old best dual 32M time of 24min 10/14s on DFI NF4 with this below time!

Also changed from 510W PCP&C SLI to 1KW PCP&C SLI psu

System:
  • FX-60 CC2BE 0536RPMW
  • Silverprop Cyclone SE / Radiical Triple Fan Single Pass / MCP655 on Kayl custom 100W psu
  • 256MB BFG 7800GTX Stock HSF
  • 4x80GB Hitachi 7K80 SATAII NCQ ULI Raid 0
  • Pioneer DVD-RW
  • 1.44MB FDD
  • 1KW PCP&C SLI power supply
  • WinXP PRO SP2 latest updated
  • ULI Integrated 2.20 drivers from nVidia.com
  • 84.56 Forceware drivers


Settings used:

2x 512MB Corsair XMS3500C2v1.1 BH-5


FSB Bus Frequency: 258
LDT/FSB Frequency Ratio: 5x
CPU/FSB Frequency Ratio: 12x
RD580 HT PLL Speed: High
HT Bus NMOS Drive Strength: 10
HT Bus PMOS Drive Strength: 10
HT Bus Receiver Impendence: 10
CPU HT Bus Drive Strength: Strong
K8 Cool & Quiet Support: Disabled

CPU VID Control: 1.55v
CPU VID Special Control: + 105.8%
DRAM Voltage Control: 3.5v
SB PCIE Voltage: 1.85v
NB Analogue Voltage: 1.34v
LDT Bus Voltage: 1.34v
NB Core Voltage: 1.34v

DRAM Frequency Set: 200 (1:1)
CPC: Enabled
CAS (tCL): 2
tRCP: 2
tRAS: 0
tRP: 2
tRC: 7
tRFC: 12
tRRD: 0
tRW: 2
tRTW: 1
tWTR: 1
tREF: 3684
Bank Interleaved: Enabled
Errata 94: Disabled
Errata 123: AUTO
Odd Divisor Correct: Disabled

DQS Skew Control: AUTO
DQS Skew Value: N/A
DRAM Drive Strength: 3 (weak)
DRAM Data Drive Strength: AUTO (Level 1)
DIMM 1/2 Clock Timing Skew: AUTO
DIMM 3/4 Clock Timing Skew: 300ps delay
Max Async Latency: 7ns
Read Preamble Time: 4ns
IdleCycle Limit: 0clks
Dynamic Counter: Enabled
R/W Queue Bypass: 16x
Bypass Max: 7x
Burst Length: 4

Last edited by eva2000; 19-05-2006 at 09:57 PM.
eva2000 is offline   Reply With Quote
Old 04-05-2006, 08:23 PM   #10
eva2000
Administrator
eva2000's PC Specs
 
Join Date: Jul 22 2004
Location: Brisbane, Australia
Posts: 23,015
twitter.com/i4memorycom Facebook Page livestream.com/i4memorycom
Blog Entries: 42
reserved 8
eva2000 is offline   Reply With Quote
Old 04-05-2006, 08:23 PM   #11
eva2000
Administrator
eva2000's PC Specs
 
Join Date: Jul 22 2004
Location: Brisbane, Australia
Posts: 23,015
twitter.com/i4memorycom Facebook Page livestream.com/i4memorycom
Blog Entries: 42
reserved 9
eva2000 is offline   Reply With Quote
Old 04-05-2006, 08:23 PM   #12
eva2000
Administrator
eva2000's PC Specs
 
Join Date: Jul 22 2004
Location: Brisbane, Australia
Posts: 23,015
twitter.com/i4memorycom Facebook Page livestream.com/i4memorycom
Blog Entries: 42
reserved 10
eva2000 is offline   Reply With Quote
Old 05-05-2006, 09:48 AM   #13
ShaneHm2
Member
ShaneHm2's PC Specs
 
Join Date: Oct 16 2004
Posts: 35
eva u tried to see if that sli trick will work on this board yet

cheers

Shane
ShaneHm2 is offline   Reply With Quote
Old 05-05-2006, 11:57 AM   #14
dinos22
Senior Member
dinos22's PC Specs
 
Join Date: Mar 26 2005
Location: Sydney
Posts: 9,825
wow 10xreserved spots

eva=excited
dinos22 is offline   Reply With Quote
Old 05-05-2006, 12:35 PM   #15
eva2000
Administrator
eva2000's PC Specs
 
Join Date: Jul 22 2004
Location: Brisbane, Australia
Posts: 23,015
twitter.com/i4memorycom Facebook Page livestream.com/i4memorycom
Blog Entries: 42
got alot of stuff to test on this board hehe

No haven't tried sli yet, figuring out the memory clocking stuff is most important first before anything else
eva2000 is offline   Reply With Quote
Old 05-05-2006, 06:05 PM   #16
psy^
Senior Member
psy^'s PC Specs
 
Join Date: Jul 01 2005
Location: 3095.au
Posts: 295
Tasty

One very tasty board indeed!
psy^ is offline   Reply With Quote
Reply

Bookmarks

Tags
adventures, cfx3200dr, crossfire, dfi, lanparty, motherboard, rd580, review


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools


Similar Threads for: DFI Lanparty UT CFX3200-DR RD580 Crossfire motherboard review adventures
Thread Thread Starter Forum Replies Last Post
[Legitreviews.com] DFI LanParty BI G41-T33 Motherboard Review News Reviews & News Online 0 17-10-2009 02:41 AM
[Hardwarecanucks.com] DFI LanParty UT X58-T3eH8 LGA1366 Motherboard Review News Reviews & News Online 0 13-03-2009 04:43 PM
[Hardwarecanucks.com] DFI Lanparty JR P45-T2RS Motherboard Review News Reviews & News Online 0 21-10-2008 07:40 PM
[review] DFI Lanparty UT RDX200 ATI Crossire review @ Anandtech.com eva2000 Reviews & News Online 4 24-10-2005 05:54 PM


All times are GMT +11. The time now is 10:35 AM.

no new posts