You are not registered yet. Please click here to register!
Frozen Cascade - Page 37 - i4memory.com - different look at memory
Tags Register Blogs FAQ Members List Calendar Mark Forums Read

Notices

Reply
 
Thread Tools
Old 24-11-2009, 11:31 PM   #289
kayl
Senior Member
kayl's PC Specs
 
Join Date: Jun 22 2005
Location: Port Hedland
Posts: 1,750
By eva2000 View Post
Looking good there Kayl -98C!! suppose you could shove an unused gpu head on top of a copper plate on top of memory modules to freeze the memory modules too hehe
do a little dino style cooling hey

Not having much luck, this 3 head cascade is turning out to be a pain in the but.
After changing the lines and putting it all together again the cpu head couldn't hold load and was falling into the positive temps with heavy load
the gpu heads one on a graphics card and the other on the load tester were holding around -85c after a vantage 3dmark bench.
i pulled it apart to check the capillary line feed to fine that one was a little longer than the other 2, this would explain why it couldn't hold load on the cpu head.
Second stage pressures are getting quiet high though with system all loaded, first stage isnt holding the load too well. THe condenser is too small :down: and the case cant fit a bigger condenser
Looks like this cascade might have to be turned into a single head cascade





kayl is offline   Reply With Quote
Old 24-11-2009, 11:53 PM   #290
eva2000
Administrator
eva2000's PC Specs
 
Join Date: Jul 22 2004
Location: Brisbane, Australia
Posts: 23,018
twitter.com/i4memorycom Facebook Page livestream.com/i4memorycom
Blog Entries: 42
such a shame, why not just have a dedicated cpu cascade + a second unit for gpus ??
eva2000 is offline   Reply With Quote
Old 25-11-2009, 09:09 AM   #291
kayl
Senior Member
kayl's PC Specs
 
Join Date: Jun 22 2005
Location: Port Hedland
Posts: 1,750
By eva2000 View Post
such a shame, why not just have a dedicated cpu cascade + a second unit for gpus ??
that was the plan, wife would have liked to have just the one cooler in the games room.
At first ill just finish the cascade, then later next year make another 2Hp 2x gpu heads i think
then ln2 on gpus once i got things sorted heheeh
kayl is offline   Reply With Quote
Old 26-11-2009, 10:12 PM   #292
eva2000
Administrator
eva2000's PC Specs
 
Join Date: Jul 22 2004
Location: Brisbane, Australia
Posts: 23,018
twitter.com/i4memorycom Facebook Page livestream.com/i4memorycom
Blog Entries: 42
By kayl View Post
that was the plan, wife would have liked to have just the one cooler in the games room.
At first ill just finish the cascade, then later next year make another 2Hp 2x gpu heads i think
then ln2 on gpus once i got things sorted heheeh
Need to look into sound proofing the case huh
eva2000 is offline   Reply With Quote
Old 12-10-2011, 12:19 AM   #293
kayl
Senior Member
kayl's PC Specs
 
Join Date: Jun 22 2005
Location: Port Hedland
Posts: 1,750
Cant remember now last time i picked up the blow torch, but it felt really good to do it again, especially first build back being a cascade.
Heres a start to my final cascade...









kayl is offline   Reply With Quote
Old 25-10-2011, 10:19 PM   #294
kayl
Senior Member
kayl's PC Specs
 
Join Date: Jun 22 2005
Location: Port Hedland
Posts: 1,750
unit together, just have to finish some insulation and final wiring and i can start to load test this babie





kayl is offline   Reply With Quote
Old 21-11-2011, 04:36 PM   #295
gaidin
Senior Member
gaidin's PC Specs
 
Join Date: Jan 17 2006
Location: Melbourne
Posts: 221
Does anyone know if kayl is still around frequently? I sent him a PM about getting mounting plates/enclosures for s1155 and s2011 for the Cascade and SS but havent heard back...
gaidin is offline   Reply With Quote
Old 22-11-2011, 09:14 PM   #296
kayl
Senior Member
kayl's PC Specs
 
Join Date: Jun 22 2005
Location: Port Hedland
Posts: 1,750
By gaidin View Post
Does anyone know if kayl is still around frequently? I sent him a PM about getting mounting plates/enclosures for s1155 and s2011 for the Cascade and SS but havent heard back...
sorry mate, work away these days for 9 days, back for 5 days. Very busy with the new GF and racing. Still on the scenes phase change wise, benching not so much.
Just replied t your pm.
Did some more work on the cascade over the weekend, -108c idle and -103c load after a few tunning mods. Unit hit -117c after 10 mins no load, sure if i left it longer would hit -120c. When im back ill put the hood on the unit and finish the wiring and post some more pics
kayl is offline   Reply With Quote
Reply

Bookmarks

Tags
cascade, frozen


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools


Similar Threads for: Frozen Cascade
Thread Thread Starter Forum Replies Last Post
Kayl Cascade cooler - 2x 1.7HP = -111.6C ! eva2000 Cooling 33 17-08-2010 05:31 PM
Asus Rampage Extreme: having fun with MCH, Spi under Air and Cascade coolings before Asus Intel motherboards / CPU 2 08-12-2008 04:24 AM
[hwbot] CPU-Z hwbot HWBOT Official Rankings 190 14-04-2008 01:06 PM
Kayl Frozen Cascade bob(nz) Cooling 12 29-01-2007 10:00 AM


All times are GMT +11. The time now is 10:27 PM.

no new posts