You are not registered yet. Please click here to register!
DDR 3 Settings on DFI boards - Page 2 - - different look at memory


Thread Tools
Old 10-04-2011, 03:34 AM   #9
Senior Member
CryptiK's PC Specs
Join Date: Aug 07 2008
Posts: 774
You can use the pullins to drop the tRD to below the CAS setting though right? On Asus boards you can set it lower than CAS and also use pullins (the REX X48 is my reference here).
CryptiK is offline   Reply With Quote
Old 15-04-2011, 01:50 AM   #10
Senior Member
Offler's PC Specs
Join Date: Nov 18 2009
Location: Bratislava
Posts: 279
I tried it previously, but it does not work at all. Not sure if the memory or the board was the issue here.

At all I am pretty lucky I got those OCZs memory sticks. Two months later they were unable to get, and out of production next month. And still i think those are not good ones, but are... good enough to use them for a while...

But still i wish for 2x 4gb 1600Mhz CL5 or something like that

Recent testing shows that some latencies provided by the BIOS in x48-t3rs are invalid. You have to re-check auto value with Everest or similar software, compare it to SPD and try more settings. Auto settings may also set incorrect values which lead to lower overclockability or high voltage requirements.

Last edited by Offler; 27-02-2012 at 08:51 PM.
Offler is offline   Reply With Quote


boards, ddr, dfi, settings

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
Thread Tools

Similar Threads for: DDR 3 Settings on DFI boards
Thread Thread Starter Forum Replies Last Post
Initial notes, findings and tips DFI UT X58-T3EH8 eva2000 DFI Intel Motherboard / CPU 0 04-08-2009 03:17 PM
AMD64 Overclocking Guide (07/11/06) eva2000 General AMD Motherboards / CPU 7 02-11-2006 05:42 PM
DDR1 to DDR2 converter :eek: dinos22 General AMD DDR2 / DDR3 Memory 14 15-09-2006 09:32 AM
DFI NF4 works with OCZ DDR Booster eva2000 DFI AMD motherboards / CPU 32 19-08-2005 10:22 AM

All times are GMT +11. The time now is 10:16 AM.