You are not registered yet. Please click here to register!
2x 1GB OCZ PC4000VX kits + Opteron 146 + DFI NF4 Ultra-D AD0 - i4memory.com - different look at memory
Tags Register Blogs FAQ Members List Calendar Mark Forums Read

Notices

Reply
 
Thread Tools
Old 05-03-2006, 09:26 AM   #1
dinos22
Senior Member
dinos22's PC Specs
 
Join Date: Mar 26 2005
Location: Sydney
Posts: 9,819
2x 1GB OCZ PC4000VX kits + Opteron 146 + DFI NF4 Ultra-D AD0

just got some OCZ 4000VX sticks for testing and will need some advice

i'm testing them first without the 4v jumper

to be continued........
dinos22 is offline   Reply With Quote
Old 05-03-2006, 09:26 AM   #2
dinos22
Senior Member
dinos22's PC Specs
 
Join Date: Mar 26 2005
Location: Sydney
Posts: 9,819
Sticks No#1...........open top heatspreader

System:
Opteron 146 CABYE 0540FPBW
DFI NF4 Ultra-D AD0 623 official bios
PCI Matrox GFX
2x18GB 10K U160 SCSI Driver + Adaptec 2100S Raid Controller
480W Antec True Power PSU 20-pin with 24-pin converter
Windows 2003 Server STD X64

2x 512MB OCZ PC4000 Gold VX CH-UTT dual channel kit

chipset = 1.5v
LDT = 1.2v
LDT 4x

CPC = Enabled
CAS Latency(CL) = 2
RAS to CAS(Trcd) = 2
Min RAS# Active time(Tras) = 8
Row Precharge Time(Trp) = 2
Row Cycle Time(Trc) = 7
Row Refresh Cycle Time(Trfc) = Auto
Row to Row Delay(Trrd) = 2
Write Recovery Time(Twr) = 2
Write to Read Delay(Twtr) = 2
Read to Write Delay(Trwt) = 3
Refresh Period (Tref) = 3120
Write CAS Latency(Twcl) = Auto
DRAM Bank Interleave = Enabled
Skew = AUTO
Skew Value = 0
DRAM Drive Strength = Auto
DRAM Data Drive Strength = Auto
Max Async Latency = Auto
Read Preamble Time = Auto
Idle Cycle Limit = 256
Dynamic Counter = Auto
R/W Queue Bypass = 16x
Bypass Max = 7x
32 byte Granularity = Disable(4burst)



230MHz 32M SuperPI run
---Yellow Slots & Orange slots same results
---vdimm is set to 3.2v+0.3 however it drops from 3.17v idle to as low as 3.04v ..........my 3.3v rail is around 3.2v at load





OK on 3.4-3.5v these looked like 255Mhz stick.....just slighly less than other so just sticking the first second kit

Last edited by dinos22; 05-03-2006 at 05:11 PM.
dinos22 is offline   Reply With Quote
Old 05-03-2006, 09:27 AM   #3
dinos22
Senior Member
dinos22's PC Specs
 
Join Date: Mar 26 2005
Location: Sydney
Posts: 9,819
Sticks No#2...........closed top heatspreader

these just wouldn't have it without 4v jumper

System:
Opteron 146 CABYE 0540FPBW
DFI NF4 Ultra-D AD0 623 official bios
PCI Matrox GFX
2x18GB 10K U160 SCSI Driver + Adaptec 2100S Raid Controller
480W Antec True Power PSU 20-pin with 24-pin converter
Windows 2003 Server STD X64

2x 512MB OCZ PC4000 Gold VX CH-UTT dual channel kit

chipset = 1.5v
LDT = 1.2v
LDT 4x

CPC = Enabled
CAS Latency(CL) = 2
RAS to CAS(Trcd) = 2
Min RAS# Active time(Tras) = 6
Row Precharge Time(Trp) = 2
Row Cycle Time(Trc) = 7
Row Refresh Cycle Time(Trfc) = Auto
Row to Row Delay(Trrd) = 2
Write Recovery Time(Twr) = 2
Write to Read Delay(Twtr) = Auto
Read to Write Delay(Trwt) = Auto
Refresh Period (Tref) = Auto
Write CAS Latency(Twcl) = Auto
DRAM Bank Interleave = Enabled
Skew = AUTO
Skew Value = 0
DRAM Drive Strength = Auto
DRAM Data Drive Strength = Auto
Max Async Latency = Auto
Read Preamble Time = Auto
Idle Cycle Limit = 256
Dynamic Counter = Auto
R/W Queue Bypass = 16x
Bypass Max = 7x
32 byte Granularity = Disable(4burst)



250MHz 32M SuperPI run
---Yellow Slots
---vdimm is set to 3.3v in bios and it was 3.36v load in windows





255MHz 32M SuperPI run
---Yellow Slots
---vdimm is set to 3.4v in bios and it was 3.47v load in windows
---TREF=3120



258MHz 32M SuperPI run
---Yellow Slots
---vdimm is set to 3.5v in bios and it was 3.57v load in windows
---TREF=3120 + tightened the timings a lot




259.6MHz 8M SuperPI run
---Yellow Slots
---vdimm is set to 3.5v in bios and it was 3.57v load in windows


Last edited by dinos22; 05-03-2006 at 04:31 PM.
dinos22 is offline   Reply With Quote
Old 05-03-2006, 09:28 AM   #4
dinos22
Senior Member
dinos22's PC Specs
 
Join Date: Mar 26 2005
Location: Sydney
Posts: 9,819
reserve3
dinos22 is offline   Reply With Quote
Old 05-03-2006, 09:29 AM   #5
dinos22
Senior Member
dinos22's PC Specs
 
Join Date: Mar 26 2005
Location: Sydney
Posts: 9,819
reserve4
dinos22 is offline   Reply With Quote
Old 05-03-2006, 09:30 AM   #6
dinos22
Senior Member
dinos22's PC Specs
 
Join Date: Mar 26 2005
Location: Sydney
Posts: 9,819
reserve5
dinos22 is offline   Reply With Quote
Old 05-03-2006, 10:13 AM   #7
ArcTan
Senior Member
ArcTan's PC Specs
 
Join Date: Aug 06 2004
Location: Sydney, Arsestralia
Posts: 1,927
looking forwards to some results hehe
did you pick up all 4 512mb sticks?
ArcTan is offline   Reply With Quote
Old 05-03-2006, 10:19 AM   #8
dinos22
Senior Member
dinos22's PC Specs
 
Join Date: Mar 26 2005
Location: Sydney
Posts: 9,819
By ArcTan
looking forwards to some results hehe
did you pick up all 4 512mb sticks?
he left all 4x to test
dinos22 is offline   Reply With Quote
Reply

Bookmarks

Tags
146, 1gb, ad0, dfi, kits, nf4, ocz, opteron, pc4000vx, ultrad


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools


Similar Threads for: 2x 1GB OCZ PC4000VX kits + Opteron 146 + DFI NF4 Ultra-D AD0
Thread Thread Starter Forum Replies Last Post
Core i7 X58 Triple Channel DDR3 Memory kits list eva2000 DDR3 Intel Memory 63 25-05-2009 09:26 PM
**i4memory SuperPI Mod v1.4 Rankings** T_M General Benchmarks 1006 07-08-2006 01:54 PM
[news] OCZ PC5000 Platinum DFI NF4 Special series released eva2000 Reviews & News Online 7 10-04-2005 06:51 PM


All times are GMT +11. The time now is 12:38 PM.

no new posts