You are not registered yet. Please click here to register!
W3520 H20 @4877Mhz - DFI UT X58-T3EH8 ! - i4memory.com - different look at memory
Tags Register Blogs FAQ Members List Calendar Mark Forums Read

Notices

Reply
 
Thread Tools
Old 03-06-2009, 09:51 PM   #1
eva2000
Administrator
eva2000's PC Specs
 
Join Date: Jul 22 2004
Location: Brisbane, Australia
Posts: 23,024
twitter.com/i4memorycom Facebook Page livestream.com/i4memorycom
Blog Entries: 42
Talking W3520 H20 @4877Mhz - DFI UT X58-T3EH8 !

Time to really push my W3520 on H20 cooling still. Managed to break alot of personal best benchmarks for max validation, max uncore frequency achieved, Super Pi 1M, 32M and Pi Fast on i7/X58 platform
  • Super Pi 32M HT Enabled max = 4677Mhz at 1.488v
  • Super Pi 32M HT Disabled max = 4794Mhz at 1.552v
  • CPUZ Validation HT Disabled max = 4877Mhz at 1.584v

System:
  • Intel Xeon W3520 3845A935 D0 (Xeon equivalent of Core i7 920 D0)
  • EK Supreme LT 1366 / FESER 480 / MCP655
  • DFI UT X58-T3EH8 04/28 beta
  • HD4870x2 (HIS 4870X2 to Asus Top bios) with ATI WinXP 9.5
  • 6GB Corsair Dominator GT DDR3-2000Mhz 7-8-7-20
  • 750GB Samsung SATAII
  • Silverstone OP1200 PSU
  • Triple boot - WinXP Pro SP3 / Vista Ultimate 64Bit SP2 / Win7 Ultimate 64bit RC

Max Validation @4877Mhz at 1.584v


Max Uncore Frequency @4645.6Mhz





Super Pi 1M & PiFast @4802Mhz at 1.584v






Super Pi 32M @4794Mhz at 1.552v




Super Pi 32M @4677Mhz at 1.488v




Max Bclk Validation

So far 235bclk is max for validation. Messing with voltages to see if I can get more




Last edited by eva2000; 04-06-2009 at 03:22 AM.
eva2000 is offline   Reply With Quote
Old 03-06-2009, 11:42 PM   #2
eva2000
Administrator
eva2000's PC Specs
 
Join Date: Jul 22 2004
Location: Brisbane, Australia
Posts: 23,024
twitter.com/i4memorycom Facebook Page livestream.com/i4memorycom
Blog Entries: 42
Will try higher clocks this weekend as forecast has some nice cold night time weather coming my way http://www.weatherzone.com.au/local/...=aploc&lc=9647
eva2000 is offline   Reply With Quote
Old 04-06-2009, 12:27 AM   #3
PcCI2iminal
Junior Member
PcCI2iminal's PC Specs
 
Join Date: Mar 28 2009
Location: Hiroshima
Posts: 29
By eva2000 View Post
Will try higher clocks this weekend as forecast has some nice cold night time weather coming my way http://www.weatherzone.com.au/local/...=aploc&lc=9647
hahahhahaah

i smell 5GHz
PcCI2iminal is offline   Reply With Quote
Old 04-06-2009, 12:37 AM   #4
eva2000
Administrator
eva2000's PC Specs
 
Join Date: Jul 22 2004
Location: Brisbane, Australia
Posts: 23,024
twitter.com/i4memorycom Facebook Page livestream.com/i4memorycom
Blog Entries: 42
hehe I wish I need to get past my current bclk limit of around 230-235bclk. over@locker886 did 254bclk on DFI UT X58-T3EH8 but used LN2 and way more IOH volts at 1.39v than I'm use to (max I've used around 1.25v).
eva2000 is offline   Reply With Quote
Old 04-06-2009, 12:53 AM   #5
PcCI2iminal
Junior Member
PcCI2iminal's PC Specs
 
Join Date: Mar 28 2009
Location: Hiroshima
Posts: 29
By eva2000 View Post
hehe I wish I need to get past my current bclk limit of around 230-235bclk. over@locker886 did 254bclk on DFI UT X58-T3EH8 but used LN2 and way more IOH volts at 1.39v than I'm use to (max I've used around 1.25v).

ouchhh, bclk @ 250MHz isnt Classified territory? Oo

have you tried a sub zero or near zero cooling?

here is my 5Ghz on Biostar Tpower X58
http://img197.imageshack.us/img197/6043/imagem3y.jpg
under LN2 and its the limit for Tpower
PcCI2iminal is offline   Reply With Quote
Old 04-06-2009, 12:59 AM   #6
eva2000
Administrator
eva2000's PC Specs
 
Join Date: Jul 22 2004
Location: Brisbane, Australia
Posts: 23,024
twitter.com/i4memorycom Facebook Page livestream.com/i4memorycom
Blog Entries: 42
Yeah highest bclk i've seen for DFI UT X58-T3EH8. I'd be happy with 240bclk for super pi 32M

Nah haven't tried sub zero on 1366 as my Kayl 1/4HP SS unit only has LGA775 mount/evap. Need to eventually get a 1366 mount/enclosure for the unit or get a colder unit ordered/built by Kayl hehe.

Haven't used DI/LN2 before either so still AIR/H20 guy mainly .. for now at least

Trying to see if can get more on bclk

Max Bclk Validation

So far 235bclk is max for validation. Messing with voltages to see if I can get more




Last edited by eva2000; 04-06-2009 at 03:23 AM.
eva2000 is offline   Reply With Quote
Old 05-06-2009, 03:14 AM   #7
DrNip
Senior Member
DrNip's PC Specs
 
Join Date: Mar 25 2009
Location: Oklahoma City
Posts: 252
Here is what I used to get 237 BCLK. I booted at 220 BCLK then SetFSB the to 237 BCLK.

Code:
Genie BIOS Setting

CPU Feature
Set VR Current Limit Max: Disabled
Thermal Management Control: Disabled
EIST Function: Enabled
CxE Function: Disabled
Execute Disable Bit: Disabled
Virtualization Technology: Disabled
TDC Enable: Disabled
x TDC Limit: 0
TDP Enable: Disabled
x TDP Limit: 0

***** Logical Processor Setting *****
Intel HT Technology: Enabled
Active Processor Cores: All

DRAM Timing
Memory Control Setting: AUTO
Memory LowGap: 1536M

DRAM Command Rate: AUTO
CAS Latency Time (tCL): 8
RAS# to CAS# Delay (tRCD): 8
RAS# Precharge (tRP): 8
Precharge Delay (tRAS): 24
REF to ACT Delay (tRFC): AUTO
Write to PRE Delay (tWR): AUTO
Rank Write to Read (tWTR): AUTO
ACT to ACT Delay (tRRD): AUTO
Row Cycle Time (tRC): AUTO
Read CAS# Precharge (tRTP): AUTO
Four ACT WIN Time (tFAW): AUTO

Voltage Setting
O.C. Shut Down Free: Enable O.C.S.D.F
CPU VID Control: 1.45v
CPU VID Special Add Limit: Enabled
CPU VID Special Add: 103.30%
Vcore Droop Control: Enabled
DRAM Bus Voltage: 1.71v
DRAM PWM Switch Frequency: Nominal
DRAM PWM Phase Control: 2 Phase Operation
CPU VTT Special Add: AUTO
CPU VTT Voltage: 1.56v
VTT PWM Switch Frequency: Nominal
VTT PWM Phase Control: 2 Phase Operation
CPU PLL Voltage: 1.80v
IOH/ICH 1.1V Voltage: 1.31v
IOH Analog Voltage: 1.25v
ICH 1.5 Voltage: 1.7v
ICH 1.05V Voltage: 1.05v
DIMM 1/2 DQ/DQSTB Bus VREF: -00.0%
DIMM 3/4 DQ/DQSTB Bus VREF: -00.0%
DIMM 5/6 DQ/DQSTB Bus VREF: -00.0%
ADDR/CMD VREF Control: Disabled
x DIMM 1/2 ADDR/CMD Bus VREF: 110
x DIMM 3/4 ADDR/CMD Bus VREF: 110
x DIMM 5/6 ADDR/CMD Bus VREF: 110
CPU QPI Drive Strength: Normal
IOH QPI Drive Strength: Strong

Exit Setup Shut down: Mode 2
O.C. Fail Retry Counter: Enabled
O.C. Fail CMOS Reload: Disabled

PPM Function: Enabled
Turbo Mode Function: Enabled
1 core Max Turbo Ratio: 22x
2 core Max Turbo Ratio: 21x
3 core Max Turbo Ratio: 21x
4 core Max Turbo Ratio: 21x
CPU Non-Turbo Clock Ratio: 20

* BCLK/UCLK/QPI Controller Settings *
QPI Control Settings: Enabled
QPI Link Fast Mode: Enabled
QPI Frequency: AUTO
CPU Base Clock (BCLK): 220 Mhz
Boot Up CPU Base Clock: AUTO
PCIE Clock: 110 Mhz
DRAM Frequency: 8
UnCore Frequency: 16

CPU Spread Spectrum: Disabled
PCIE Spread Spectrum: Disabled
I ran out of DICE or I would have tried changing to this to see if i couldn't at least get that 1 extra BCLK to get me to 5ghz.:

QPI Control Settings: Disabled
DRAM Frequency: 6
UnCore Frequency: 14
DrNip is offline   Reply With Quote
Old 05-06-2009, 03:29 AM   #8
eva2000
Administrator
eva2000's PC Specs
 
Join Date: Jul 22 2004
Location: Brisbane, Australia
Posts: 23,024
twitter.com/i4memorycom Facebook Page livestream.com/i4memorycom
Blog Entries: 42
Thanks ! will try booting from 220bclk and see if i get more

At >235bclk it's strange the mouse can still move around within windows but everything else is frozen and non-responsive hehe
eva2000 is offline   Reply With Quote
Reply

Bookmarks

Tags
3845a935, corsair domainator gt, cpuz validation, dfi ut x58, super pi 32m, w3520


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools


Similar Threads for: W3520 H20 @4877Mhz - DFI UT X58-T3EH8 !
Thread Thread Starter Forum Replies Last Post
[Techpowerup.com] DFI LanParty X58 UT T3eH8 Pictured News Reviews & News Online 1 16-04-2010 08:08 AM
DFI X58 T3eH8 WRONG BIOS sammurai DFI Intel Motherboard / CPU 7 06-01-2010 04:03 AM
DFI X58 UT T3eH8 no support Older DFI Intel Motherboard / CPU 2 21-10-2009 05:02 AM
X58 motherboard - real user feedback and comments eva2000 General Intel Motherboards / CPU 6 29-03-2009 03:47 PM
[Bit-tech.net] First Look: DFI LANParty UT X58 T3eH8 News Reviews & News Online 0 19-11-2008 12:02 AM


All times are GMT +11. The time now is 04:19 AM.

no new posts