You are not registered yet. Please click here to register!
Kingston HyperX testing. - i4memory.com - different look at memory
Tags Register Blogs FAQ Members List Calendar Mark Forums Read

Notices

Reply
 
Thread Tools
Old 08-05-2009, 09:35 PM   #1
cstkl1
Senior Member
cstkl1's PC Specs
 
Join Date: Apr 09 2009
Location: Malaysia
Posts: 209
Kingston HyperX testing.

Will post pic and more results later on higher vdimm..
Pic of setup about the same as profile pic except with dfi
For DFI x58's

I find memtest hci and memtest86+ is fake on vdimm
hyperpi is somewhat fake cause all u need is to have stable vtt voltages
it will accept lower vdimm a lot by around 0..05v
prime95 set large fft then custom change run fft to 5.4gb is the best for vdimm
linx is best for vcore and ioh/ich voltages.
also HT off requires more vtt voltage than HT on



Test rig
I7 920
DFI UT X58 the8
Kingston Hyperx T1 3x2gb 2000mhz CL8
GTx285 sli.


Rated at 2000mhz CL8-8-8-24 so it should run 1866 CL7-8-7-20 , 1600 CL6-7-6-18 at the same voltage

Result of rated speed

1.56set, DMM Read 1.551v - this is the UT default voltage

2000 8-8-8-24 1n vtt 1.37


1870 7-8-7-20 1n vtt 1.26


1600 6-7-6-18 1n vtt 1.21


1.65v set DMM Read 1.648 load

1720 6-7-6-18 1n vtt 1.23


1993 7-8-7-20 1n vtt 1.39


2100 8-8-8-24 1n vtt 1.48


had to abort linx. ambient temp now 36C will do this again on a cooler day with a hr05 and some fans.
take note i am testing in the casing not a bench rig.
more to come.

was curious how fast is this with ht on


1.68v set DMM Read 1.673 load

2000mhz 7-8-7-20 1n 1.39vtt



Max Stable if u have the kahuna's to run prime95 is 1.86vdimm vtt 1.68v .. csl7 should be 1.96v for vdimm but i try to abstain going more than 1.9v on x58. trust me its stable. once u figure out the trick to this mobo.. its just upping to the voltage.



Conclusion : Same price as dominator 1600mhz CL8 6gb . so whatcha think??

Last edited by cstkl1; 10-05-2009 at 01:32 AM.
cstkl1 is offline   Reply With Quote
Old 08-05-2009, 09:52 PM   #2
eva2000
Administrator
eva2000's PC Specs
 
Join Date: Jul 22 2004
Location: Brisbane, Australia
Posts: 23,017
twitter.com/i4memorycom Facebook Page livestream.com/i4memorycom
Blog Entries: 42
Interesting about vdimm - must try it. Which board is that 1st or 2nd DFI UT X58-T3EH8 ?
eva2000 is offline   Reply With Quote
Old 08-05-2009, 11:03 PM   #3
cstkl1
Senior Member
cstkl1's PC Specs
 
Join Date: Apr 09 2009
Location: Malaysia
Posts: 209
hey eva check out the wprime score

is wprime2 faster??
curious now.

raja did 5.5ghz for 1.55s

i shaved 11 secs from 4.2ghz to 4.4ghz from 2000mhz cl7 to 2100cl8
so technically if i can do 4.6ghz 2200mhz cl8 should get 1.55s
cstkl1 is offline   Reply With Quote
Old 09-05-2009, 01:21 AM   #4
eva2000
Administrator
eva2000's PC Specs
 
Join Date: Jul 22 2004
Location: Brisbane, Australia
Posts: 23,017
twitter.com/i4memorycom Facebook Page livestream.com/i4memorycom
Blog Entries: 42
wprime is all over the place you can't really compare versions for wprime..

Last i read wprime 2.0 is slower than faster wprime 1.x version but much closer to the fastest 1.x version - but that was several months ago - haven't kept up to date for wprime unfortunately.
eva2000 is offline   Reply With Quote
Old 09-05-2009, 02:50 AM   #5
cstkl1
Senior Member
cstkl1's PC Specs
 
Join Date: Apr 09 2009
Location: Malaysia
Posts: 209
will post soon the base clocks for elpida's

DFI X58 Stock voltage is 1.56v set.

1600 CL 8-8-8-24 1n 1.54v vdimm vtt 1.21v
1866 CL 7-8-7-20 1n 1.54v vdimm vtt 1.26v
2000 CL 8-8-8-24 1n 1.54v vdimm vtt 1.37v

dunno why i had a epiphany with this mobo. know every setting up to dram 2100mhz atm.
2150 stable is hard.. no joke.. but will take a crack at it later.

again will post all the setting after the competition. hmm not even sure will be entering it as monday onwards will be overseas again for work.. damn it.
cstkl1 is offline   Reply With Quote
Old 09-05-2009, 03:05 AM   #6
eva2000
Administrator
eva2000's PC Specs
 
Join Date: Jul 22 2004
Location: Brisbane, Australia
Posts: 23,017
twitter.com/i4memorycom Facebook Page livestream.com/i4memorycom
Blog Entries: 42
nice looks like tireless hours on DFI UT X58 testing is now paying off for you
eva2000 is offline   Reply With Quote
Old 09-05-2009, 03:22 AM   #7
cstkl1
Senior Member
cstkl1's PC Specs
 
Join Date: Apr 09 2009
Location: Malaysia
Posts: 209
i guess so eva.

bclk 215.. hmm ram 2150 is a different matter however.
will do a CL9 later.
should be interesting.
cstkl1 is offline   Reply With Quote
Old 10-05-2009, 03:06 AM   #8
cstkl1
Senior Member
cstkl1's PC Specs
 
Join Date: Apr 09 2009
Location: Malaysia
Posts: 209
the scaling of this kit is very linear to voltage on the dfi once u understand the mobo

max allowable by this kit at 1.86v is
2300mhz CL8, 2200mhz CL7,

max allowable by this kit at 1.76v is
2200mhz CL8,2100mhz Cl7

was tempted to do 2000mhz cl6 but danger zone abit cause the vtt is at 1.39v with the dram at 1.86v.. too close to the 0.5v for my comfort.
cstkl1 is offline   Reply With Quote
Reply

Bookmarks

Tags
hyperx, kingston, testing


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools


Similar Threads for: Kingston HyperX testing.
Thread Thread Starter Forum Replies Last Post
6GB Kingston HyperX KHX2000C9AD3T1K3/6GX Elpida BDBG Testing GenAn DDR3 Intel Memory 20 03-12-2013 11:39 PM
[Techpowerup.com] (PR) Kingston Introduces HyperX Blu Series DDR3 Memory Kits News Reviews & News Online 0 27-05-2010 12:30 AM
3x2GB Kingston HyperX T1 2000CAS8 - Elpida 50mm Hyper - X48 DDR3 tests eva2000 DDR3 Intel Memory 18 26-07-2009 03:04 PM
[Techpowerup.com] Kingston Technology Releases Blue LED HyperX Fan News Reviews & News Online 0 04-06-2009 07:32 AM
[Techpowerup.com] Kingston HyperX DDR3 Modules Now Available in up to 2GHz PC3-16000 News Reviews & News Online 0 03-10-2008 12:23 PM


All times are GMT +11. The time now is 08:50 PM.

no new posts