You are not registered yet. Please click here to register!
EK Supreme LT + FESER 480 (DFI UT X58-T3EH8) - i4memory.com - different look at memory
Tags Register Blogs FAQ Members List Calendar Mark Forums Read

Notices

Reply
 
Thread Tools
Old 24-04-2009, 12:29 AM   #1
eva2000
Administrator
eva2000's PC Specs
 
Join Date: Jul 22 2004
Location: Brisbane, Australia
Posts: 23,010
twitter.com/i4memorycom Facebook Page livestream.com/i4memorycom
Blog Entries: 42
EK Supreme LT + FESER 480 (DFI UT X58-T3EH8)

Finally got around to building my new water cooling loop - first time for Core i7 cpu cooling

Moved my DFI UT X58-T3EH8 from Thermalright Ultra 120 Extreme air cooling to the following:

Originally had Swiftech GTZ 1366 in mind but saw reviews EK was better for 1366 socket. Also bought some XSPC LCD temp sensor probes (rated down to -50C) to attach to my Corsair Dominator GT modules when I try out Corsair's TEC Ram cooling. XSPC LCD, EK Supreme LT, Feser 480 and T-line bought from Gammods.com.au







Corsair TEC memory cooler will be using separate water cooling loop with Corsair Nautilus 500





Finishing off some leak testing before booting her up

Last edited by eva2000; 25-04-2009 at 10:47 AM.
eva2000 is offline   Reply With Quote
Old 24-04-2009, 02:28 AM   #2
eva2000
Administrator
eva2000's PC Specs
 
Join Date: Jul 22 2004
Location: Brisbane, Australia
Posts: 23,010
twitter.com/i4memorycom Facebook Page livestream.com/i4memorycom
Blog Entries: 42
First test at stock speed with VCORE set to AUTO in bios

Idle & Prime95 Load





~12-15C delta temps from idle to load


System:
  • i7 920 3836A756
  • EK Supreme LT 1366 / FESER 480 / MCP655
  • 512MB Inno3D 8800GT OC Edition
  • 6GB Corsair Dominator GT DDR3-2000Mhz 7-8-7-20
  • 750GB Samsung SATAII
  • Silverstone OP1200 PSU
  • Dual boot - WinXP Pro SP3 / Vista Ultimate 64Bit SP1

Last edited by eva2000; 24-04-2009 at 09:21 AM.
eva2000 is offline   Reply With Quote
Old 24-04-2009, 02:28 AM   #3
eva2000
Administrator
eva2000's PC Specs
 
Join Date: Jul 22 2004
Location: Brisbane, Australia
Posts: 23,010
twitter.com/i4memorycom Facebook Page livestream.com/i4memorycom
Blog Entries: 42
20x200Bclk


Quick LinX 0.5.8 5 pass test for load temps. Load to Idle delta temps = ~28C to 33C
  • Vcore 1.30v + 100.7% bios set = 1.344v idle / 1.328v load
  • Vdroop Disabled
  • CPU VTT = 1.40v bios set
  • VDIMM = 1.65v bios set

Room Temp = 22.5C to 23.5C

Idle



Load



Post Load Temps



System:
  • i7 920 3836A756
  • EK Supreme LT 1366 / FESER 480 / MCP655
  • 512MB Inno3D 8800GT OC Edition
  • 6GB Corsair Dominator GT DDR3-2000Mhz 7-8-7-20
  • 750GB Samsung SATAII
  • Silverstone OP1200 PSU
  • Dual boot - WinXP Pro SP3 / Vista Ultimate 64Bit SP1

Last edited by eva2000; 24-04-2009 at 09:22 AM.
eva2000 is offline   Reply With Quote
Old 24-04-2009, 02:28 AM   #4
eva2000
Administrator
eva2000's PC Specs
 
Join Date: Jul 22 2004
Location: Brisbane, Australia
Posts: 23,010
twitter.com/i4memorycom Facebook Page livestream.com/i4memorycom
Blog Entries: 42
20x206Bclk


Load to Idle delta temps = ~32C to 37C
  • 206 Bclk bios set
  • Vcore 1.35v + 101.18% bios set = 1.344v idle / 1.328v load
  • Vdroop Disabled
  • CPU VTT = 1.39v + 0.025v bios set
  • VDIMM = 1.65v bios set
  • ICH/IOH = 1.19v bios set
  • ICH Analogue = 1.15v bios set
  • tRRD = 6
  • tFAW = 31
  • RTL = +3

Room Temp = 22.5C to 23.5C



Idle



Load



Post Load Temps




System:
  • i7 920 3836A756
  • EK Supreme LT 1366 / FESER 480 / MCP655
  • 512MB Inno3D 8800GT OC Edition
  • 6GB Corsair Dominator GT DDR3-2000Mhz 7-8-7-20
  • 750GB Samsung SATAII
  • Silverstone OP1200 PSU
  • Dual boot - WinXP Pro SP3 / Vista Ultimate 64Bit SP1

Last edited by eva2000; 27-04-2009 at 05:36 AM.
eva2000 is offline   Reply With Quote
Old 24-04-2009, 02:28 AM   #5
eva2000
Administrator
eva2000's PC Specs
 
Join Date: Jul 22 2004
Location: Brisbane, Australia
Posts: 23,010
twitter.com/i4memorycom Facebook Page livestream.com/i4memorycom
Blog Entries: 42
21x206Bclk


Real test of Feser 480/EK Supreme LT cooling power with short 5 pass Linx test @21x206Bclk = 4309Mhz at 1.488v!

Load to Idle delta temps = ~39C to 46C
  • 206 Bclk bios set
  • Vcore 1.4v + 104.25% bios set = 1.488v - 1.504v idle / 1.488v load
  • Vdroop Disabled
  • CPU VTT = 1.44v bios set
  • VDIMM = 1.65v bios set
  • ICH/IOH = 1.23v bios set
  • ICH Analogue = 1.15v bios set
  • tRFC = 88
  • tRRD = 6
  • tRTW = 6
  • tFAW = 31
  • RTL = +3

Room Temp = 26.5C to 27.5C





Idle



Load



Post Load Temps




System:
  • i7 920 3836A756
  • EK Supreme LT 1366 / FESER 480 / MCP655
  • 512MB Inno3D 8800GT OC Edition
  • 6GB Corsair Dominator GT DDR3-2000Mhz 7-8-7-20
  • 750GB Samsung SATAII
  • Silverstone OP1200 PSU
  • Dual boot - WinXP Pro SP3 / Vista Ultimate 64Bit SP1

Last edited by eva2000; 25-04-2009 at 02:00 AM.
eva2000 is offline   Reply With Quote
Old 24-04-2009, 02:28 AM   #6
eva2000
Administrator
eva2000's PC Specs
 
Join Date: Jul 22 2004
Location: Brisbane, Australia
Posts: 23,010
twitter.com/i4memorycom Facebook Page livestream.com/i4memorycom
Blog Entries: 42
Max CPU clock with HT enabled vs HT disabled


Nice improvement on water cooling! On air max ceiling with HT enabled was stuck around 4473Mhz for super pi 32M and booting >4473mhz needed to disable HT at which max validation was 4769Mhz and 4652Mhz for 32M Pi with HT disabled.

Now with water cooling, so far max ceiling with HT enabled increased from 4473mhz to 4619Mhz for Super Pi 32M and 4669Mhz for CPUZ Validation. HT disabled max 32M Pi increased from 4652Mhz to 4680Mhz and Validation is around 4744Mhz so far. This is first attempt, so could be more to squeeze out to fiddle with right voltages for max bclk stability

TRUE120 Air
  • Max 32M Super Pi = 4473Mhz HT enabled / 4652Mhz HT disabled
  • Max Validation = 4473Mhz HT enabled / 4769Mhz HT disabled

EK Supreme LT / Feser480 H20
  • Max 32M Super Pi = 4618Mhz HT enabled / 4680Mhz HT disabled
  • Max Validation = 4669Mhz HT enabled / 4744Mhz HT disabled


i7 920 @4618.9Mhz HT enabled
Super Pi 32M




i7 920 @4680.6Mhz HT disabled
Super Pi 32M




Max CPUZ Validation @4669Mhz HT enabled & @4744Mhz HT disabled


@4669Mhz HT enabled




@4744Mhz HT disabled




Last edited by eva2000; 25-04-2009 at 08:22 AM.
eva2000 is offline   Reply With Quote
Old 24-04-2009, 02:28 AM   #7
eva2000
Administrator
eva2000's PC Specs
 
Join Date: Jul 22 2004
Location: Brisbane, Australia
Posts: 23,010
twitter.com/i4memorycom Facebook Page livestream.com/i4memorycom
Blog Entries: 42
Amazing what a water cooling can do for max stable bclk too. On air 228 bclk was max for 32M pi, but on H20 straight boot from bios 32M done at 230blck with ease!

229bclk boot from bios



230bclk boot from bios




231bclk 32M Passed



232bclk 1M



setfsb bump from 230bclk to 233bclk





System:
  • i7 920 3836A756
  • EK Supreme LT 1366 / FESER 480 / MCP655
  • 512MB Inno3D 8800GT OC Edition
  • 6GB Corsair Dominator GT DDR3-2000Mhz 7-8-7-20
  • 750GB Samsung SATAII
  • Silverstone OP1200 PSU
  • Dual boot - WinXP Pro SP3 / Vista Ultimate 64Bit SP1

Last edited by eva2000; 26-04-2009 at 02:58 PM.
eva2000 is offline   Reply With Quote
Old 24-04-2009, 02:28 AM   #8
eva2000
Administrator
eva2000's PC Specs
 
Join Date: Jul 22 2004
Location: Brisbane, Australia
Posts: 23,010
twitter.com/i4memorycom Facebook Page livestream.com/i4memorycom
Blog Entries: 42
Pushing some suicide everest runs with memory clocked to the max to see what kind of everest numbers I get



Best I can do for now


Last edited by eva2000; 27-04-2009 at 07:41 AM.
eva2000 is offline   Reply With Quote
Reply

Bookmarks

Tags
core i7 h20, ek supreme lt 1366, feser 480, x58


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools


Similar Threads for: EK Supreme LT + FESER 480 (DFI UT X58-T3EH8)
Thread Thread Starter Forum Replies Last Post
[Techpowerup.com] DFI LanParty X58 UT T3eH8 Pictured News Reviews & News Online 1 16-04-2010 07:08 AM
DFI X58 T3eH8 WRONG BIOS sammurai DFI Intel Motherboard / CPU 7 06-01-2010 03:03 AM
DFI X58 UT T3eH8 no support Older DFI Intel Motherboard / CPU 2 21-10-2009 04:02 AM
X58 motherboard - real user feedback and comments eva2000 General Intel Motherboards / CPU 6 29-03-2009 02:47 PM
[Bit-tech.net] First Look: DFI LANParty UT X58 T3eH8 News Reviews & News Online 0 18-11-2008 11:02 PM


All times are GMT +11. The time now is 07:17 PM.

no new posts