You are not registered yet. Please click here to register!
DFI Lanparty UT X58-T3EH8 LGA1366 Photos, Bios and Overclocking Information Guide - Page 22 - i4memory.com - different look at memory
Tags Register Blogs FAQ Members List Calendar Mark Forums Read

Notices

Reply
 
Thread Tools
Old 30-03-2009, 08:56 PM   #169
Renegade5399
Member
Renegade5399's PC Specs
 
Join Date: Feb 21 2009
Posts: 61
Oh I wasn't hoping for the 22x multi. I'm just making sure that it didn't trigger to 22x when in windows. So if I have all cores enabled, is it safe to say 22x won't trigger at all? I run turbo off because I was worried that under a small load on the CPU, 22x would fire and cause a BSOD or lockup.
Renegade5399 is offline   Reply With Quote
Old 30-03-2009, 09:44 PM   #170
eva2000
Administrator
eva2000's PC Specs
 
Join Date: Jul 22 2004
Location: Brisbane, Australia
Posts: 23,011
twitter.com/i4memorycom Facebook Page livestream.com/i4memorycom
Blog Entries: 42
well here's the theory for turbo mode explained here

TDC/TDP & TM Protection (Turbo mode effects): In CPU Feature section of bios the Set VR Current Limit Max and Thermal Management Control options control TDC/TDP and other temperature related throttling for Core i7 cpu.
  • TDC = over current protection which default Vcore OCP max is 140A (for CPU PWM IC). At >70A, TDC is tripped, it will disable Turbo mode - thus you may see your cpu multiplier drop by 1x or 2x.
  • TDP = thermal design power according to DFI is tripped at around >80W which will also disable Turbo mode
  • Set VR Current Limit Max = Enable to disable both TDC and TDP protection functions thus allowing Turbo mode to run without any TDC/TDP protection.
  • Thermal Management Control = Tripped when core temp is >90C, Turbo mode will disable. At >105C core temp, will force system shutdown.
  • Only when 965 cpu is installed are 2 additional options for TDC/TDP displayed for TDC Enable: x TDC Limit: and TDP Enable: Disabled x TDP Limit: 0
But seems with different bioses some folks have been able to get 22x multi to stick some haven't managed to and under load drops to non-multi cpu multiplier. So fairly sure you won't have any surpise jumps to 22x multi.
eva2000 is offline   Reply With Quote
Old 30-03-2009, 10:19 PM   #171
Renegade5399
Member
Renegade5399's PC Specs
 
Join Date: Feb 21 2009
Posts: 61
Awesome. Again eva, thank you for all your help thus far.
Renegade5399 is offline   Reply With Quote
Old 01-04-2009, 12:19 PM   #172
eva2000
Administrator
eva2000's PC Specs
 
Join Date: Jul 22 2004
Location: Brisbane, Australia
Posts: 23,011
twitter.com/i4memorycom Facebook Page livestream.com/i4memorycom
Blog Entries: 42
Renegade5399 moved your PWM issue to new thread which is more appropriate http://i4memory.com/f80/dfi-ut-x58-v...m-temps-16320/
eva2000 is offline   Reply With Quote
Old 02-04-2009, 10:10 AM   #173
psyxeon
Member
psyxeon's PC Specs
 
Join Date: Aug 11 2008
Location: Spain - Europe
Posts: 60
I have a problem regarding stability.
My pc crashes while running prime or occpt, normally after 30/45 minutes. To have it stable priming I have to give it 1.425 vcore

LinX runs fine for 20 or 25 passes. with 1.39 vcore

My bios settings are here

http://s225.photobucket.com/albums/d...0OVERCLOCKING/




Last edited by psyxeon; 02-04-2009 at 10:29 AM.
psyxeon is offline   Reply With Quote
Old 03-04-2009, 12:17 AM   #174
kangaxx
Member
kangaxx's PC Specs
 
Join Date: Feb 16 2009
Posts: 76
i leave you with this validate

look memory frequency and cpu frequency
crucial value 1333 :O

kangaxx is offline   Reply With Quote
Old 03-04-2009, 12:23 AM   #175
eva2000
Administrator
eva2000's PC Specs
 
Join Date: Jul 22 2004
Location: Brisbane, Australia
Posts: 23,011
twitter.com/i4memorycom Facebook Page livestream.com/i4memorycom
Blog Entries: 42
By psyxeon View Post
I have a problem regarding stability.
My pc crashes while running prime or occpt, normally after 30/45 minutes. To have it stable priming I have to give it 1.425 vcore

LinX runs fine for 20 or 25 passes. with 1.39 vcore

My bios settings are here

http://s225.photobucket.com/albums/d...0OVERCLOCKING/



http://i2.tinypic.com/6p85538.jpg
that's just it, your prime stable at 1.425v and linx stable at 1.39v nothing mysterious about it. Try raising CPU VTT as some i7 cpus like CPU VTT and VCORE closer together like one of my 2x i7 920 3836A756 in tip #2 here. Or you cpu needs more vcore for real stability.

By kangaxx View Post
i leave you with this validate

look memory frequency and cpu frequency
crucial value 1333 :O

wow DDR3-2338Mhz 9-9-9-27! how much CPU VTT and VDIMM ?
eva2000 is offline   Reply With Quote
Old 03-04-2009, 01:16 AM   #176
kangaxx
Member
kangaxx's PC Specs
 
Join Date: Feb 16 2009
Posts: 76
vdimmi 1,98 VTT 1,6v

they are d9jnm of crucial value ( 50$ rams )

-30 cpu ( i finished ln2 )

next i try mass 3d, i was stable with 1,3IOH e 1,25 IOH/ICH
kangaxx is offline   Reply With Quote
Reply

Bookmarks

Tags
core i7, ddr3, dfi, lga1366, triple channel, x58-t3eh8


Currently Active Users Viewing This Thread: 5 (0 members and 5 guests)
 
Thread Tools


Similar Threads for: DFI Lanparty UT X58-T3EH8 LGA1366 Photos, Bios and Overclocking Information Guide
Thread Thread Starter Forum Replies Last Post
DFI Lanparty DK X48-T2RBS Plus bios, info, photos & overclocking tips eva2000 DFI Intel Motherboard / CPU 159 10-09-2012 06:40 AM
DFI LP UT X48-T3RS - Info, overclocking tips & photos eva2000 DFI Intel Motherboard / CPU 11 26-09-2008 08:07 PM
DFI LANParty UT ICFX3200-T2R/G ATI RD600 Intel LGA775 Information & Photos eva2000 DFI Intel Motherboard / CPU 57 14-12-2007 01:47 PM
AMD64 Overclocking Guide (07/11/06) eva2000 General AMD Motherboards / CPU 7 02-11-2006 04:42 PM


All times are GMT +11. The time now is 08:49 PM.

no new posts