You are not registered yet. Please click here to register!
[] Plextor Launches M9Pe NVMe SSDs - - different look at memory


Thread Tools
Old 03-01-2018, 12:47 AM   #1
News Hound
News's PC Specs
Join Date: May 19 2008
Posts: 61,037
[] Plextor Launches M9Pe NVMe SSDs

Today Plextor is officially launching their first SSDs with 3D NAND flash memory: the M9Pe family of NVMe SSDs. Based on Toshiba's 64-layer BiCS3 3D TLC NAND, the M9Pe is the successor to the 15nm MLC-based M8Pe, which was their first NVMe SSD. The choice of TLC NAND for this new flagship product mirrors a trend across most SSD vendors, who are abandoning MLC NAND in even the high-end product segments as they transition to 64L 3D NAND.

Aside from the updated NAND, little has changed from Plextor's previous generation of NVMe SSDs, and the specifications are almost identical to what was previewed at Computex 2017. The M9Pe still uses Marvell's 88SS1093 controller with Plextor's own firmware. The 128GB capacity has been dropped from the lineup, and 1TB is still the largest model. Performance ratings for the M9Pe are mostly much higher than the M8Pe, especially for sequential transfers. The 256GB M9Pe has lower random read and write speeds than the M8Pe, and the random read rating of 180k IOPS also falls below the planar TLC-based 256GB M8Se. However, the higher capacities of the M9Pe promise much improved random I/O performance, with random read speeds of up to 400k IOPS for the 1TB model.

Plextor M9Pe Series Specifications Comparison 256 GB 512 GB 1 TB Form Factor M9PeY: Half height half length PCIe add-in card (HHHL)
M9PeG: M.2 2280 with heatspreader
M9PeGN: M.2 2280 without heatspreader Controller Marvell 88SS1093 Interface NVMe PCIe 3.0 x4 DRAM 512MB LPDDR3 1024MB LPDDR3 NAND Toshiba 64L BiCS3 3D TLC Sequential Read 3000 MB/s 3200 MB/s 3200 MB/s Sequential Write 1000 MB/s 2000 MB/s 2100 MB/s 4KB Random Read (QD32) 180k IOPS 340k IOPS 400k IOPS 4KB Random Write (QD32) 160k IOPS 280k IOPS 300k IOPS Endurance 160 TBW 320 TBW 640 TBW Warranty 5 years The write endurance rating on the M9Pe is a step backward from the M8Pe and instead matches the M8Se's rating. However, as a higher-tier product the M9Pe does get a five year warranty instead of the three year warranty on the M8Se.

As with the previous generation of NVMe SSDs from Plextor, the M9Pe comes in three variants. The base model is the plain M.2 2280 card, dubbed the M9PeGN. The M9PeG is the same M.2 SSD with a heatspreader that adds slightly to the exterior dimensions of the drive. The M9PeY variant is the add-in card version. This places the M.2 drive in a half-height half-length adapter card with a heatsink and LED lighting. The heatsink is geometrically identical to the one used on the M8Se, but the plastic highlights have been changed from blue to red, and the monochromatic LEDs have been replaced with RGB lighting.

Our review samples of the M9Pe have arrived and will begin testing later this week. A full review will be available later this month.

News is offline   Reply With Quote


anandtechcom, launches, m9pe, nvme, plextor, ssds

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
Thread Tools

Similar Threads for: [] Plextor Launches M9Pe NVMe SSDs
Thread Thread Starter Forum Replies Last Post
[] Lite-On Launches CA3 M.2 NVMe SSDs: Up to 1TB, 2.9 GB/s, Marvell 88SS1093 News Reviews & News Online 0 10-11-2017 02:32 PM
[] NVMe 1.3 Specification Published With New Features For Client And Enterprise SSDs News Reviews & News Online 0 25-05-2017 09:51 AM
[] Market Trends Q2 2016: SSD Shipments Up 41.2% YoY, PC Sales Up on Q1 News Reviews & News Online 0 06-10-2016 10:00 AM
[] Market Trends Q1 2016: Shipments of SSDs Up 32.7% Year-over-Year News Reviews & News Online 0 26-05-2016 04:17 AM
[] Samsung Shows Off SM961 and PM961 SSDs: OEM Drives Get a Boost News Reviews & News Online 0 24-03-2016 12:59 PM

All times are GMT +11. The time now is 04:12 PM.