You are not registered yet. Please click here to register!
Asus Rampage III Extreme - results thread - Page 13 - i4memory.com - different look at memory

Notices

Reply
 
Thread Tools
Old 03-07-2010, 04:07 AM   #97
Klaian
Junior Member
Klaian's PC Specs
 
Join Date: Jul 03 2010
Posts: 1
Anyone got a good suggestion for getting the following to 4.2+ ghz?

i7 980 Extreme
Rampage III Extreme
Mushkin Enhanced Redline 6GB DDR3 1600 (998805)

I think I am mostly concerned around setting the different voltages, but would like to see what others suggest just to be safe. Also, anyone here ever had any issues on this board losing sound hardware in windons just randomly lost it? At this point, I have not had any luck getting it back. I may try a reinstall of Win7 this weekend see if that fixes it. Thanks for any information.

Klaian
Klaian is offline   Reply With Quote
Old 03-07-2010, 04:09 AM   #98
diego
Junior Member
diego's PC Specs
 
Join Date: Jun 26 2010
Posts: 14
By donmarkoni View Post
I changed your profile, so you can try. Red is a must for quickly going over 222 BCLK, and Blue is to play with if you want to try QPI over 8000.
THX Don........my problem persists....
diego is offline   Reply With Quote
Old 03-07-2010, 04:55 AM   #99
donmarkoni
Senior Member
donmarkoni's PC Specs
 
Join Date: May 13 2009
Posts: 488
By Klaian View Post
Anyone got a good suggestion for getting the following to 4.2+ ghz?

i7 980 Extreme
Rampage III Extreme
Mushkin Enhanced Redline 6GB DDR3 1600 (998805)

I think I am mostly concerned around setting the different voltages, but would like to see what others suggest just to be safe. Also, anyone here ever had any issues on this board losing sound hardware in windons just randomly lost it? At this point, I have not had any luck getting it back. I may try a reinstall of Win7 this weekend see if that fixes it. Thanks for any information.

Klaian
I can't help you much, as I have no experience with 980X. Still unable to buy one.
You can look in this thread for some BIOS tweaks, but best is to look for some eva2000's results all over the forum.

By diego View Post
THX Don........my problem persists....
Have you tried a new BIOS: R3E0802 (7zip)?
I hear it's better then 0704, but still didn't tried it. My folding finishes in about an hour and then I'll try.
donmarkoni is offline   Reply With Quote
Old 03-07-2010, 07:44 AM   #100
diego
Junior Member
diego's PC Specs
 
Join Date: Jun 26 2010
Posts: 14
By donmarkoni View Post
I can't help you much, as I have no experience with 980X. Still unable to buy one.
You can look in this thread for some BIOS tweaks, but best is to look for some eva2000's results all over the forum.



Have you tried a new BIOS: R3E0802 (7zip)?
I hear it's better then 0704, but still didn't tried it. My folding finishes in about an hour and then I'll try.
Hi Don......

Yes,I tried the new bios 0802 and wall at 220....
Whit 0704 wall at 222.

THX Don....thanks for your time.....
diego is offline   Reply With Quote
Old 03-07-2010, 01:06 PM   #101
mrlooolz
Junior Member
mrlooolz's PC Specs
 
Join Date: Jul 03 2010
Posts: 3
hello, i am a noob Ocer , and after doing loads of research i have hit a wall.

on bclk 200 i cannot boot,

on 190 bclk i get BSOD cause i think its the ram settings

my systems specs

i7-980x|Asus Rampage3e|Prolimatech Mega Shadow cooler,2noctua
fans|CrucialSSD C300 256 GB|Corsair dominatorsGT2000Mhz 6GB
Corsair HX1000w PSU|XFX black edition ATI 5970|Coolmaster CosmosS
|windows 7 64 bit.

i would like a bios template for a 4.0 24/7 stable OC with ram running at its commercial speed 2000mhz with good timingz. would appreciate a bios template please so i can apply the same settings to mine
mrlooolz is offline   Reply With Quote
Old 04-07-2010, 06:47 AM   #102
donmarkoni
Senior Member
donmarkoni's PC Specs
 
Join Date: May 13 2009
Posts: 488
By Klaian View Post
Anyone got a good suggestion for getting the following to 4.2+ ghz?

i7 980 Extreme
Rampage III Extreme
Mushkin Enhanced Redline 6GB DDR3 1600 (998805)

I think I am mostly concerned around setting the different voltages, but would like to see what others suggest just to be safe. Also, anyone here ever had any issues on this board losing sound hardware in windons just randomly lost it? At this point, I have not had any luck getting it back. I may try a reinstall of Win7 this weekend see if that fixes it. Thanks for any information.

Klaian
By mrlooolz View Post
hello, i am a noob Ocer , and after doing loads of research i have hit a wall.

on bclk 200 i cannot boot,

on 190 bclk i get BSOD cause i think its the ram settings

my systems specs

i7-980x|Asus Rampage3e|Prolimatech Mega Shadow cooler,2noctua
fans|CrucialSSD C300 256 GB|Corsair dominatorsGT2000Mhz 6GB
Corsair HX1000w PSU|XFX black edition ATI 5970|Coolmaster CosmosS|windows 7 64 bit.

i would like a bios template for a 4.0 24/7 stable OC with ram running at its commercial speed 2000mhz with good timingz. would appreciate a bios template please so i can apply the same settings to mine
Could you both paste you settings using BIOS template from the first post.

By diego View Post
Hi Don......

Yes,I tried the new bios 0802 and wall at 220....
Whit 0704 wall at 222.

THX Don....thanks for your time.....
Could it be CPU? Did you try it on another board with different results?
donmarkoni is offline   Reply With Quote
Old 04-07-2010, 12:29 PM   #103
mrlooolz
Junior Member
mrlooolz's PC Specs
 
Join Date: Jul 03 2010
Posts: 3
Target CPU Frequency 3444MHz
Target DRAM Frequency 2003MHz

LN2 Mode: Disabled***
QPI Loadline Calibration: Disabled***

Sync Mode [Enabled]
AI Overclock Tuner [X.M.P]
OC From CPU level Up [Auto]
CPU Ratio Setting [24.0]
CPU Turbo Power Limit [Disabled]

>CPU Configuration----------------------------
CPU Ratio Setting [24.0]
C1E Support [Disabled]
Hardware Prefetcher [Enabled]
Adjacent Cache Line Prefetcher [Enabled]
Intel(R) Virtualiyation Tech [Enabled]
CPU TM Function [Disabled]
Execute Disable Bit [Enabled]
Intel(R) HT Technology [Enabled]
Active Processor Cores [All]
A20M [Disabled]
Intel(R) SpeedStep(TM) Tech [Enabled]
Intel(R) C-STATE Tech [Disabled]
C State package limit setting [Auto]
----------------------------------------------

BCLK Frequency [143]
PCIE Frequency [100]
DRAM Frequency [Auto]
UCLK Frequency [Auto]
QPI Link Data Rate [Auto]

Memory Configuration Protect [Disabled]

>DRAM Timing Control--------------------------
CAS# Latency 8 [8]
RAS# to CAS# Delay 8 [8]
RAS# PRE Time 8 [8]
RAS# ACT Time 24 [24]
RAS# to RAS# Delay 4 [4]
REF Cycle Time 72 [72]
WRITE Recovery Time 12 [10]
READ to PRE Time 6 [6]
FOUR ACT WIN Time 24 [Auto]
Back-To-BackCAS# Delay 0 [Auto]

Timing Mode 2N [2N]
Round Trip Latency on CHA 60 [60]
Round Trip Latency on CHB 62 [62]
Round Trip Latency on CHC 64 [64]

WRITE To READ Delay(DD) 8 [Auto]
WRITE To READ Delay(DR) 8 [Auto]
WRITE To READ Delay(SR) 18 [Auto]
READ To WRITE Delay(DD) 7 [Auto]
READ To WRITE Delay(DR) 7 [Auto]
READ To WRITE Delay(SR) 7 [Auto]
READ To READ Delay(DD) 7 [Auto]
READ To READ Delay(DR) 6 [Auto]
READ To READ Delay(SR) 4 [Auto]
WRITE To WRITE Delay(DD) 8 [Auto]
WRITE To WRITE Delay(DR) 8 [Auto]
WRITE To WRITE Delay(SR) 18 [Auto]
----------------------------------------------

CPU Differential Amplitude [Auto]
CPU Clock Skew [Auto]
IOH Clock Skew [Auto]
------------ Extreme Engine Digi+ ------------
Digi+ PWR Mode [T-Balanced]
PWR Volt. Control [Auto]
Load-Line Calibration [Full]
CPU Voltege OCP [Enabled]
CPU PWM Frequency [1000kHz]

Extreme OV [Disabled]
Extreme OC [Auto]

CPU Voltage 1.415 [Auto]
CPU PLL Voltage 1.812 [Auto]
QPI/DRAM Core Voltage 1.310 [Auto]
DRAM Bus Voltage 1.654 [Auto]

>DRAM REF Voltages----------------------------
DRAM DATA REF Voltage on CHA [Auto]
DRAM CTRL REF Voltage on CHA [Auto]
DRAM DATA REF Voltage on CHB [Auto]
DRAM CTRL REF Voltage on CHB [Auto]
DRAM DATA REF Voltage on CHC [Auto]
DRAM CTRL REF Voltage on CHC [Auto]
----------------------------------------------

IOH Voltage 1.244 [Auto]
IOH PCIE Voltage 1.508 [Auto]

ICH Voltage 1.111 [Auto]
ICH PCIE Voltage [Auto]

---------- Spread Spectrum Control -----------
CPU Spread Spectrum [Disabled]
DRAM Spread Spectrum [Disabled]
mrlooolz is offline   Reply With Quote
Old 04-07-2010, 12:30 PM   #104
mrlooolz
Junior Member
mrlooolz's PC Specs
 
Join Date: Jul 03 2010
Posts: 3
sorry for double post dint know how to use the scroll down properly, i dint remember the exact bios settings but umm i just have xmp profile set and achi for the sata and thats its, everything else is load default settings
mrlooolz is offline   Reply With Quote
Reply

Bookmarks

Tags
asus, asus rampage iii extreme, asus rog, asus x58, extreme, iii, marvel sata3 raid, marvel sata6 raid, marvell 9128 raid, marvell 9128 sata3, rampage, rampage 3 extreme, results, thread


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools


Similar Threads for: Asus Rampage III Extreme - results thread
Thread Thread Starter Forum Replies Last Post
[Techpowerup.com] ASUS Shows Off ROG Rampage III Gene Motherboard News Reviews & News Online 0 29-05-2010 01:00 PM
[Techpowerup.com] ASUS Gives Rampage III Extreme 4-way SLI Capability with ROG Xpander News Reviews & News Online 0 20-05-2010 09:11 PM
i5 670 & ASUS P7P55D-DELUXE Motherboard 2D review Uncle Fester Asus Intel motherboards / CPU 9 18-03-2010 07:41 AM
[Legitreviews.com] Asus X58 Rampage III Extreme Motherboard Preview News Reviews & News Online 0 02-03-2010 03:41 AM
[Techpowerup.com] ASUS Rampage III Extreme Smiles for the Camera News Reviews & News Online 0 10-01-2010 03:01 AM


All times are GMT +11. The time now is 12:56 PM.