You are not registered yet. Please click here to register!
[] Intel Releases "Titan Ridge" Thunderbolt 3 Controllers: Adds DisplayPort 1.4 Support & USB-C Host Compat - - different look at memory - different look at memory
Home > Online > Reviews & News Online > [] Intel Releases "Titan Ridge" Thunderbolt 3 Controllers: Adds DisplayPort 1.4 Support & USB-C Host Compat


Thread Tools
Old 09-01-2018, 07:59 AM   #1
News Hound
News's PC Specs
Join Date: May 19 2008
Posts: 61,102
[] Intel Releases "Titan Ridge" Thunderbolt 3 Controllers: Adds DisplayPort 1.4 Support & USB-C Host Compat

Intel has introduced a new family of Thunderbolt 3 controllers that bring support of the DisplayPort 1.4 standard to TB3 ports. The new Titan Ridge family of controllers pick up where Intel's previous Alpine Ridge controllers left off by incorporating new DisplayPort functionality, and for the first time, a USB-C fallback mode when used as a sink/peripheral device. This mid-generation update for Thunderbolt 3 will allow the standard and devices using the new Titan Ridge controllers to catch up with current display standards, and work better with the next generation of UHD displays.

Intel’s JHL7x40 family of Thunderbolt 3 controllers supports two main features of the TB3 technology, including PCIe 3.0 with 40 Gbps data transfer rate as well as USB 3.1 Gen 2 with 10 Gbps data transfer rate. The big difference is that Titan Ridge adds support for allowing two DisplayPort 1.4 streams to be encapsulated into the TB3 connection, versus two DisplayPort 1.2 streams in case of the previous-gen TB3 controllers. What isn't changing here is the actual TB3 signaling standard or the cabling, so the total amount bandwidth offered by the previous-gen Alpine Ridge controllers and the new-gen Titan Ridge chips is the same.

The shift in DisplayPort standards is a small but important one for Intel and TB3 device manufacturers. A single DP 1.2 stream is enough for 4K@60Hz displays, but for TB3-enabled monitors beyond that – such as 5K monitors or 4K HDR monitors – vendors would have to resort to multi-tile monitor configurations. Which certainly works for early adopter products, but it's undesirable in the long run due to the higher costs and configuration hassles of a multi-tile monitor. So as these types of monitors become more mainstream and pure DisplayPort monitors shift over to DP 1.4, Thunderbolt 3 has needed to catch up.

Meanwhile, because DP 1.4 has greater bandwidth requirements, it's worth nothing that TB3 displays incorporating Titan Ridge and DP1.4 still cannot exceed 40 Gbps offered by TB3. Formally, one DP 1.4 stream can carry 25.92 gigabits of data per second (32.4 Gbps with overhead) and can support a 5Kp60/8Kp30 display without compression, or a 5Kp120/8Kp60 monitor when the Display Stream Compression 1.2 (DSC) technology is used. However, since in case of the TB3 there is a bandwidth limitation, it will not be possible to plug, say, two 4Kp120 monitors to a single TB3 port on a laptop, despite the fact that Titan Ridge can carry two DisplayPort 1.4 streams. At the same time, something like a single 4Kp144 is now a theoretical possibility (at least for systems with a dGPU). Obviously, since the Thunderbolt 3 technology supports optional USB Power Delivery 3.0 technology, a TB3-enabled laptop can be powered by its TB3 display connection, greatly simplifying setups.

DisplayPort Signaling Standards Standard Raw Bandwidth
(4 Lanes) Target Monitor Resolutions HBR1 (DP 1.0/1.1) 10.8 Gbps 1440p@60Hz HBR2 (DP 1.2) 21.6 Gbps 4K@60Hz HBR3 (DP 1.3/1.4) 32.4 Gbps 4K@120Hz &
8K@60Hz (w/DSC) It's also worth noting that since the DP 1.4 spec is not supported by Intel's iGPUs, Intel-powered notebooks and desktops looking to take advantage of Titan Ridge's DP 1.4 functionality will have to use dGPUs to drive their TB3 controllers. This will somewhat increase the complexity of these designs, since previously most vendors only needed to route the iGPU to the TB3 controllers.

Overall the Titan Ridge family of Thunderbolt 3 controllers consists of three parts: the JHL7540 and the JHL7340 chips for PCs, as well as the JHL7440 chip designed for peripherals. The JHL7340 and the JHL7540 support one and two TB3 ports, respectively, and work exactly like their Apine Ridge predecessors but with the addition of DisplayPort 1.4 functionality.

The JHL7440 however is much more interesting. It too is a dual-port controller, but it is designed specifically for peripherals and is intended to enable compatibility between TB3 peripherals and USB-C hosts. Today’s TB3 docks and displays only work with systems featuring Thunderbolt 3 ports, as there's no way for Alpine Ridge controllers to fall back to being USB-C sinks. By contrast, the JHL7440 controller can fall back for use as a USB-C sink, allowing it to offer "basic compatibility" with USB-C ports. This of course gets into matters such as USB-C's many alt modes – particularly DisplayPort Alt Mode – by at the end of the day the idea is that with Titan Ridge, TB3 peripherals can be connected to a USB-C host and retain most of their functionality. So think TB3 drive arrays that will still operate with less bandwidth, TB3 monitors that may slow down or lose non-display features, etc.

As for why Intel is making this move now, it's worth pointing out that Intel plans to make the Thunderbolt 3 spec available to the industry under a nonexclusive, royalty-free license this year. So it makes a lot of sense for Intel to maximize the compatibility of TB3 peripherals before third-party TB3 controllers emerge.

Intel's Thunderbolt 3 Controllers DSL
6240 DSL
6340 DSL
6540 JHL
6340 JHL
6540 JHL
7340 JHL
7440 JHL
7540 Family Alpine Ridge Titan Ridge Launch Date Q2 2016 Q3 2015 Q2 2016 Q1 2018 TDP 1.2 W 1.7 W 2.2 W 1.7 W 2.2 W ? ? ? Number of Ports 1 2 1 2 1 2 DisplayPort 2x 1.2 2x 1.4 Package Size 10.7 × 10.7 mm ? ? ? Price $6.45 $8.00 $8.55 $8.00 $8.55 ? ? ? Intel’s Titan Ridge controllers will continue to require an external USB Type-C multiplexer and a PD 3.0 controller. Meanwhile, if today’s solutions use the TI TPS65983B chip, there will be other options for the Titan Ridge.

Intel has not published pricing of the new Titan Ridge controllers and intends to do so later in the quarter. As for the availability of devices featuring the new controllers, I suspect we're going to see them sooner than later. Intel’s TB3 software has actually supported the new controllers since mid-2017, hinting that the development of actual hardware by Intel’s partners should be well under way by now.

Related Reading

News is offline   Reply With Quote


adds, anandtechcom, compat, controllers, displayport, host, intel, releases, support, thunderbolt, titan ridge, usbc

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
Thread Tools

Similar Threads for: [] Intel Releases "Titan Ridge" Thunderbolt 3 Controllers: Adds DisplayPort 1.4 Support & USB-C Host Compat
Thread Thread Starter Forum Replies Last Post
[] Intel Documents Point to AVX-512 Support for Cannon Lake Consumer CPUs News Reviews & News Online 0 20-10-2017 04:44 AM
[] HP Unveils Third-Gen All-In-One Z1 Workstation: 4K Display, Intel Xeon, Professional Graphics News Reviews & News Online 0 26-04-2016 09:02 AM
[] Updates DAS Lineup with Thunderbolt 2 and USB 3.0 Multi-Bay Enclosures News Reviews & News Online 0 01-03-2015 11:43 PM
Memtest86+ (v5.00 beta 4) eva2000 General Software 61 30-03-2013 06:07 PM
Memset v4.1 Beta 4 / CPU Tweaker v1.5 (P55/X58) - tweaking Intel chipset memory timings eva2000 General Software 19 22-09-2009 02:22 AM

All times are GMT +11. The time now is 10:34 PM.