You are not registered yet. Please click here to register!
Asus Rampage III Extreme - results thread - Page 9 - i4memory.com - different look at memory

Notices

Reply
 
Thread Tools
Old 21-06-2010, 02:01 PM   #65
shadewither
Member
shadewither's PC Specs
 
Join Date: Jun 17 2010
Location: shanghai
Posts: 56
I have the same problem as basco:
proven 225+ bclk capable 920(+all other rigs) cannot work properly on 220+ bclk @ R3E 0602.
218 bclk seems fine; 219 bclk needs >100 PCIE; 220+ bclk simply does not work.

CPU basically works at 220+ and does not suddenly become unstable, and CPU performance(e.g. flops) seems normal.
But it seems that GPU<->CPU bandwidth is corrputed:
lagging graphics even in BIOS;
observed graphics glitches in Windows(2D, not dare to try 3D);
GPU<->Host bandwith test fails(succeed at 219 or lower).
My creative X-Fi PCI soundcard does not seem to work properly at 220+ either.

(clock/voltage below are not accurate)
These settings are >10 hours LinX stable for bclk 219.
Code:
Target CPU Frequency        4620MHz
Target DRAM Frequency        1763MHz

LN2 Mode:            Disabled***
QPI Loadline Calibration:    Enabled***

Sync Mode            [Disabled]
AI Overclock Tuner        [Manual]
OC From CPU level Up        [Auto]
CPU Ratio Setting        [21.0]
CPU Turbo Power Limit        [Disabled]

>CPU Configuration----------------------------
CPU Ratio Setting        [21.0]
C1E Support            [Disabled]
Hardware Prefetcher        [Enabled]
Adjacent Cache Line Prefetcher    [Enabled]
Intel(R) Virtualiyation Tech    [Enabled]
CPU TM Function            [Disabled]
Execute Disable Bit        [Enabled]
Intel(R) HT Technology        [Enabled]
Active Processor Cores        [All]
A20M                [Disabled]
Intel(R) SpeedStep(TM) Tech    [Disabled]
Intel(R) C-STATE Tech        [Disabled]
C State package limit setting    [Auto]
----------------------------------------------

BCLK Frequency            [220]
PCIE Frequency            [100]
DRAM Frequency            [1763]
UCLK Frequency            [3529]
QPI Link Data Rate        [7920]

Memory Configuration Protect    [Disabled]

>DRAM Timing Control--------------------------
CAS# Latency              7    [7]
RAS# to CAS# Delay          7    [7]
RAS# PRE Time              7    [7]
RAS# ACT Time             21    [21]
RAS# to RAS# Delay          4    [4]
REF Cycle Time             72    [72]
WRITE Recovery Time         ?    [Auto]
READ to PRE Time          ?    [Auto]
FOUR ACT WIN Time         ?    [Auto]
Back-To-BackCAS# Delay          0    [Auto]

Timing Mode             1N    [1N]
Round Trip Latency on CHA    ?    [Auto]
Round Trip Latency on CHB    ?    [Auto]
Round Trip Latency on CHC    ?    [Auto]

WRITE To READ Delay(DD)          ?    [Auto]
WRITE To READ Delay(DR)          ?    [Auto]
WRITE To READ Delay(SR)          ?    [Auto]
READ To WRITE Delay(DD)          ?    [Auto]
READ To WRITE Delay(DR)          ?    [Auto]
READ To WRITE Delay(SR)          ?    [Auto]
READ To READ Delay(DD)          ?    [Auto]
READ To READ Delay(DR)          ?    [Auto]
READ To READ Delay(SR)          ?    [Auto]
WRITE To WRITE Delay(DD)      ?    [Auto]
WRITE To WRITE Delay(DR)      ?    [Auto]
WRITE To WRITE Delay(SR)      ?    [Auto]
----------------------------------------------

CPU Differential Amplitude    [Auto]
CPU Clock Skew            [Auto]
IOH Clock Skew            [Auto]
------------ Extreme Engine Digi+ ------------
Digi+ PWR Mode            [T-Balanced]
PWR Volt. Control        [Auto]
Load-Line Calibration        [Full]
CPU Voltege OCP            [Enabled]
CPU PWM Frequency        [1000kHz]

Extreme OV            [Disabled]
Extreme OC            [Auto]

CPU Voltage        --    [1.36250]
CPU PLL Voltage     --    [1.50125]
QPI/DRAM Core Voltage    --    [1.42500]
DRAM Bus Voltage    --    [1.70925]

>DRAM REF Voltages----------------------------
DRAM DATA REF Voltage on CHA    [Normal]
DRAM CTRL REF Voltage on CHA    [Normal]
DRAM DATA REF Voltage on CHB    [Normal]
DRAM CTRL REF Voltage on CHB    [Normal]
DRAM DATA REF Voltage on CHC    [Normal]
DRAM CTRL REF Voltage on CHC    [Normal]
----------------------------------------------

IOH Voltage        1.16    [1.16641]
IOH PCIE Voltage    1.508    [1.51105]

ICH Voltage        1.111    [1.11341]
ICH PCIE Voltage    1.508    [1.51105]

---------- Spread Spectrum Control -----------
CPU Spread Spectrum        [Disabled]
DRAM Spread Spectrum        [Disabled]



***on-board jumper dependant
None of these worked:
IOH/IOH PCI/ICH/ICH PCIE voltage + 5 notches
vpll > 1.8
vcore/vtt + 0.1v
CPU Clock Skew 0-400
IOH Clock Skew 0-400
NX Bit disable/VT disable
shadewither is offline   Reply With Quote
Old 22-06-2010, 02:46 AM   #66
donmarkoni
Senior Member
donmarkoni's PC Specs
 
Join Date: May 13 2009
Posts: 488
Why don't you try first with lower CPU multi, just to be sure.
And try with higher IOH voltage, as you say you have CPU <-> GPU lag and corruption.
Here are mine settings for 220 and 240 BCLK for some reference.
donmarkoni is offline   Reply With Quote
Old 22-06-2010, 06:30 AM   #67
famich
Senior Member
famich's PC Specs
 
Join Date: Aug 01 2009
Posts: 113
BIOS 0704

A fine result here with the newest BIOS /thanks, Don, for your recommendation /
Attached Images
File Type: jpg 4300 bios0704.jpg (154.1 KB, 28 views)
famich is offline   Reply With Quote
Old 22-06-2010, 08:33 AM   #68
donmarkoni
Senior Member
donmarkoni's PC Specs
 
Join Date: May 13 2009
Posts: 488
By famich View Post
A fine result here with the newest BIOS /thanks, Don, for your recommendation /
Keep goin', keep goin'... I just might try your 4.4 GHz settings when you get there. I'm suspecting my CPU just won't do 4.4GHz 24/7 stable (folding), not even on this board. It can do 240 BCLK, it also can do 4000 UnCore 24/7 no sweat, but 4.4 Core... no go.
donmarkoni is offline   Reply With Quote
Old 22-06-2010, 08:36 PM   #69
famich
Senior Member
famich's PC Specs
 
Join Date: Aug 01 2009
Posts: 113
Would be an exception, even 32nm new CPUS /Westmere / are having some probs reaching that , AFAIK.

I am being taken down by my memory. I got Patriot 6GB 1600 8 8 8 24 that run 10 10 10 28 at this speed . Then I got second hand Corsair XMS that got specs 7 7 7 20 @1,9V at 1600 /Elpida chips , MP / I guess I ll have to try this kit ...
famich is offline   Reply With Quote
Old 22-06-2010, 10:15 PM   #70
donmarkoni
Senior Member
donmarkoni's PC Specs
 
Join Date: May 13 2009
Posts: 488
By famich View Post
Would be an exception, even 32nm new CPUS /Westmere / are having some probs reaching that , AFAIK.

I am being taken down by my memory. I got Patriot 6GB 1600 8 8 8 24 that run 10 10 10 28 at this speed . Then I got second hand Corsair XMS that got specs 7 7 7 20 @1,9V at 1600 /Elpida chips , MP / I guess I ll have to try this kit ...
I have tried before some "old" DDR3 kits that require 1.9V (link).
Maybe you too won't be needing such high voltage like I didn't need it.
Just to remind you: vDIMM must not exceed 0.5V from VTT, so you don't forget when playing with high voltage memory.
donmarkoni is offline   Reply With Quote
Old 22-06-2010, 11:27 PM   #71
famich
Senior Member
famich's PC Specs
 
Join Date: Aug 01 2009
Posts: 113
Thanks, interesting reading while working - that rule I do know, thanks anyway!!! will report back...

just a quick remark: managed to ge to 219 BCLK, 220 will require some fine adjusting of the mem timings, running the Corsair XMS at 8 8 8 28 at 1,71 VDIMM at 219 BCLK.

Last edited by famich; 24-06-2010 at 09:14 PM. Reason: adding a remark
famich is offline   Reply With Quote
Old 25-06-2010, 06:14 AM   #72
famich
Senior Member
famich's PC Specs
 
Join Date: Aug 01 2009
Posts: 113
218 BCLK

Tried a little bit more:
Attached Images
File Type: jpg BCLK218.jpg (154.0 KB, 10 views)
File Type: jpg 4300 corsairmem.jpg (159.7 KB, 8 views)
famich is offline   Reply With Quote
Reply

Bookmarks

Tags
asus, asus rampage iii extreme, asus rog, asus x58, extreme, iii, marvel sata3 raid, marvel sata6 raid, marvell 9128 raid, marvell 9128 sata3, rampage, rampage 3 extreme, results, thread


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools


Similar Threads for: Asus Rampage III Extreme - results thread
Thread Thread Starter Forum Replies Last Post
[Techpowerup.com] ASUS Shows Off ROG Rampage III Gene Motherboard News Reviews & News Online 0 29-05-2010 01:00 PM
[Techpowerup.com] ASUS Gives Rampage III Extreme 4-way SLI Capability with ROG Xpander News Reviews & News Online 0 20-05-2010 09:11 PM
i5 670 & ASUS P7P55D-DELUXE Motherboard 2D review Uncle Fester Asus Intel motherboards / CPU 9 18-03-2010 07:41 AM
[Legitreviews.com] Asus X58 Rampage III Extreme Motherboard Preview News Reviews & News Online 0 02-03-2010 03:41 AM
[Techpowerup.com] ASUS Rampage III Extreme Smiles for the Camera News Reviews & News Online 0 10-01-2010 03:01 AM


All times are GMT +11. The time now is 09:25 PM.