You are not registered yet. Please click here to register!
[Anandtech.com] Samsung Starts Mass Production of Chips Using 10nm Low Power Plus (10LPP) Process Tech - i4memory.com - different look at memory

Notices

Reply
 
Thread Tools
Old 30-11-2017, 04:00 PM   #1
News
News Hound
News's PC Specs
 
Join Date: May 19 2008
Posts: 59,531
[Anandtech.com] Samsung Starts Mass Production of Chips Using 10nm Low Power Plus (10LPP) Process Tech


Samsung Foundry on Wednesday revealed that it has started mass production of SoC products using its second generation 10 nm Low Power Plus (10LPP) fabrication technology. The new manufacturing process will enable developers of chips to reduce power consumption or increase performance of their products compared to the first-gen 10 nm tech (10LPE).

Like previous node updates from Samsung, the new 10LPP fabrication process promises a range of improvements depending on what a customer is looking for. On the performance front the process is said to offer 10% higher performance at the same complexity and power, or alternatively, customers can design for an up to 15% reduction in power consumption at the same frequency and complexity. Samsung Foundry does not disclose how it managed to improve the 10LPP vs. the 10LPE, but it is logical to assume that the company had to optimize the transistor structure somehow. Samsung’s 10LPP and 10LPE technologies are still very similar from design rules and manufacturing points of view, so experience obtained with the former will be applicable to the latter.

Advertised PPA Improvements of New Process Technologies
Data announced by companies during conference calls, press briefings and in press releases 14LPP
vs 28LPP 10LPE
vs 14LPE 10LPE
vs 14LPP 10LPP
vs 10LPE 10LPU
vs
10LPE 8LPP
vs 10LPP Power 60% 40% 30% ~15% ? 10% Performance 40% 27% >10% ~10% ? ? Area Reduction 50% 30% 30% none ? 10% Samsung Foundry says that SoCs made using the 10LPP process technology will be used in devices to be launched early next year and onwards. The contract maker of semiconductors does not officially disclose which chips it is producing using the 10LPP process technology, but since it uses plural (“SoC products”), it all but given that there are more than one 10LPP SoC model in production. One of the candidates to be produced using the 10LPP is Samsung’s own Exynos 9 Series 9810 SoC that is expected to power the company’s 2018 flagship Galaxy S smartphones. Typically, Qualcomm also adopts Samsung’s latest process technologies along with the South Korean giant itself (to a large degree because its chips are used inside flagship Galaxy handsets too), but so far, Qualcomm has not made any announcements concerning the 10LPP.

Keeping in mind that while Samsung Foundry’s LPE process technologies are used primarily by Samsung itself and a very limited number of its customers, the LPP processes are adopted by a considerably larger group of clients. So the launch of the 10LPP means expanded usage of the company’s 10 nm node in general. In order to meet demand, Samsung will start to make SoCs using the 10LPP in its new S3 fab located in Hwaseong, Korea.

Meanwhile, the evolution of Samsung’s 10 nm node is not going to stop with the formal introduction of the 10LPP. Going forward, Samsung plans to introduce the 10LPU fabrication technology for ultra-low-power SoCs as well as the 8LPP manufacturing process for advanced SoCs. Samsung yet has to detail the 10LPU, but with the 8LPP it promises a 10% area reduction (at the same complexity) as well as a 10% lower power consumption (at the same frequency and complexity) compared to the 10LPP process due to narrower metal pitches and other optimizations.

“We will be able to better serve our customers through the migration from 10LPE to 10LPP with improved performance and higher initial yield,” said Ryan Lee, vice president of foundry marketing at Samsung Electronics. “Samsung with its long-living 10nm process strategy will continue to work on the evolution of 10nm technology down to 8LPP to offer customers distinct competitive advantages for a wide range of applications.”

Related Reading:



More...
News is offline   Reply With Quote
Reply

Bookmarks

Tags
10lpp, 10nm, anandtechcom, chips, low, mass, power, process, production, samsung, starts, tech


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools


Similar Threads for: [Anandtech.com] Samsung Starts Mass Production of Chips Using 10nm Low Power Plus (10LPP) Process Tech
Thread Thread Starter Forum Replies Last Post
[Anandtech.com] Samsung Pre-Announces 16 Gbps GDDR6 Chips for Next-Gen Graphics Cards News Reviews & News Online 0 15-11-2017 04:09 PM
[Anandtech.com] Intel Displays 10nm Wafer, Commits to 10nm ‚??Falcon Mesa‚?? FPGAs News Reviews & News Online 0 20-09-2017 09:35 AM
[Anandtech.com] Samsung Begins Mass Production of PM971: Tiny BGA SSDs with 1500 MB/s Read Speed News Reviews & News Online 0 02-06-2016 08:51 AM
[Anandtech.com] Samsung Shows Off SM961 and PM961 SSDs: OEM Drives Get a Boost News Reviews & News Online 0 24-03-2016 12:59 PM
[Anandtech.com] Intel‚??s 14nm Technology in Detail News Reviews & News Online 0 12-08-2014 02:26 PM


All times are GMT +11. The time now is 11:39 PM.