You are not registered yet. Please click here to register!
View Single Post - [] Cooler Master Ships 120 mm Turbine Master Fans
View Single Post
Old 19-01-2011, 01:58 PM   #1
News Hound
News's PC Specs
Join Date: May 19 2008
Posts: 60,257
[] Cooler Master Ships 120 mm Turbine Master Fans

Cooler Master shipped its Turbine Master 120 mm series fans. As the name suggests, the fan has many blades (16 in number), shaped to look like an aircraft turbine. This design allows the fan to achieve high air flow at lower rotation speeds. The Turbine Master 120 is available in three variants based on rotation speed: Mach 0.8, that spins at 800 rpm, Mach 1.2 with 1200 rpm speed, and Mach 1.8 with 1800 rpm speed. Of these, only the 1200 rpm variant is out now, with the other two slated for a little later.

The Turbine Master 120 Mach 1.2 with its 1200 rpm rotational speed pushes 56.5 CFM of air with a rated noise output of 21.1 dBA. The fan uses a round frame with holes for 120 mm spacing, with both rubber and metal screws bundled. The motor uses a barometric ball bearing with a high lifespan. It uses standard 3-pin fan input, but a Molex to 3-pin cable is bundled. The impeller is detachable to help clean better. The Cooler Master Turbine Master 120 Mach 1.2 fan is priced at US $16.

Source: TechConnect Magazine

News is offline   Reply With Quote