You are not registered yet. Please click here to register!
View Single Post - Asus P5K Deluxe - Intel P35 Bearlake + Intel E6600 B1 ES / Q6600 Kentsfield / X6800
View Single Post
Old 10-06-2007, 12:31 AM   #150
eva2000's PC Specs
Join Date: Jul 22 2004
Location: Brisbane, Australia
Posts: 23,046 Facebook Page
Blog Entries: 42
Re: Asus P5K Deluxe - Intel P35 Bearlake + Intel E6600 B1 ES / Q6600 Kentsfield / X68

Q6600 B3 @3465Mhz
2GB Crucial Ballistix PC2-8500 @618Mhz 5-5-5-9 at 2.35v

Swapped over to 2x1GB Crucial Ballistix 8500 dual channel kit.
  • It seems for my Q6600 B3 max FSB depends on how well memory modules can handle certain settings. Why ? Because my Q6600 B3 can hit 495-500FSB alot easier with this memory than other memory I've tested. Other memory hit max FSB around 490FSB.
  • Also I might have found a possible strap change for Asus P5K Deluxe (maybe only noticeable with very very tight subtimings ? ) @500FSB. At 7x500FSB, memtest86+ v1.70 reported 6216MB/s bandwidth. At 7x499FSB, memtest86+ v1.70 reported 6505MB/s bandwidth!.

Super Pi v1.50 32M = 13m 35.203s

JumperFree Configuration Settings
AI Overclocking: Manual
CPU Ratio Control: Manual
- Ratio CMOS Setting: 7
FSB Frequency: 495
PCI-E Frequency: 100
DRAM Frequency: DDR2-1238
DRAM Command Rate: 2T
DRAM Timing Control: Manual
CAS# Latency: 5
RAS# to CAS# Delay: 5
RAS# Precharge: 5
RAS# Activate to Precharge: 9
TWR: 3
TRFC: 30
DRAM Static Read Control: AUTO

Transaction Booster: AUTO
Boost Level: N/A
Clock Over-Charging Mode: AUTO

CPU Spread Spectrum: Disabled
PCIE Spread Spectrum: Disabled

CPU Voltage: 1.5v
CPU Voltage Reference: x0.63
CPU Voltage Damper: Enabled
CPU PLL Voltage: 1.50
DRAM Voltage: 2.35
FSB Termination Voltage: 1.40
North Bridge Voltage: 1.55
North Bridge Voltage Reference: AUTO
South Bridge Voltage: 1.20

Advance CPU Settings
CPU Ratio Control: Manual
- Ratio CMOS Setting: 7
C1E Suppport: Disabled
Max CPUID Value Limit: Disabled
Vanderpool Technology: Disabled
CPU TM Function: Disabled
Execute Disable Bit: Disabled
PECI: Disabled

USB Configuration
USB Functions: Enabled
Legacy USB Support: Disabled (need to enable it to detect USB flash drives)

That kind of time I usually need on Asus P5B Deluxe around 3600Mhz - 9x400FSB 4:5 500Mhz 4-4-4-4
eva2000 is offline   Reply With Quote