You are not registered yet. Please click here to register!
View Single Post - 2x1GB Crucial Ballistix Tracer Results
View Single Post
Old 07-10-2005, 03:55 AM   #66
Junior Member
LlamaOfDoom's PC Specs
Join Date: Sep 07 2004
Location: Unley, Adelaide
Posts: 6
I seem to be stuck.
Resorted to 310HTT with 5/6 divider for now, I really want ~315HTT (if I can stretch my CPU once I get the BT on) with 9/10 divider.

3000+ Venice stock cooler @ 1.475+113% @ 9x310HTT
DFI NF4 SLI-D 704-2BT bios
6800GT latest official dets
2x 1gb crucial ballistix
stacks of hdds
WinXP Pro SP2
not sure what NF chipset drivers

2x 1GB crucial ballistix Z503

VID = 1.475
VID Special = +113%
chipset = 1.6v
LDT = 1.4v
LDT auto

CPC = Enabled
CAS Latency(CL) = 3
RAS to CAS(Trcd) = 3
Min RAS# Active time(Tras) = 8
Row Precharge Time(Trp) = 3
Row Cycle Time(Trc) = 7
Row Refresh Cycle Time(Trfc) = 14
Row to Row Delay(Trrd) = 2
Write Recovery Time(Twr) = 3
Write to Read Delay(Twtr) = 1
Read to Write Delay(Trwt) = 4
Refresh Period (Tref) = 166MHz 3.9us (cant remember BIOS setting)
Write CAS Latency(Twcl) = 1
DRAM Bank Interleave = Enabled
Skew = off
Skew Value = 0
DRAM Drive Strength = Level 8
DRAM Data Drive Strength = Level 2
DDRAM Response Time = Fastest -------------- should I set this to fastest? I've not noticed any difference between settings.
Max Async Latency = 8ns
Read Preamble Time = 6.5ns
Idle Cycle Limit = 16
Dynamic Counter = Disabled --------------- is this setting relevant?
R/W Queue Bypass = 8x
Bypass Max = 4x
32 byte Granularity = Disable(8burst)

I just dont know what to change.
At the moment, I'm thinking the BIOS. Looking to flash to 623 I think people are using to get the extra I need
Any other ideas?

Last edited by LlamaOfDoom; 07-10-2005 at 04:10 AM.
LlamaOfDoom is offline   Reply With Quote