i4memory.com - different look at memory

i4memory.com - different look at memory (http://i4memory.com/forums.php)
-   Cooling (http://i4memory.com/forumdisplay.php?f=22)
-   -   Kayls water chiller (http://i4memory.com/showthread.php?t=1096)

kayl 11-08-2005 02:40 AM

Kayls water chiller
 
2 Attachment(s)
i made this tonight its a start to my new project.
the resistors i will be making into a heat load to test it with.

alpha0ne 11-08-2005 03:31 AM

What the quack is it :D

T_M 11-08-2005 12:43 PM

nice hx

eva2000 11-08-2005 01:52 PM

ooh nice more toys for kayl to play with :)

scragley 11-08-2005 02:57 PM

Nice Kayl. Everything of yours always looks so ghetto (in a good way) comapred to stuff over at xs.org, but yours always works close to if not better and for alot smaller cost. Well done keep up the good work :)

kayl 11-08-2005 04:56 PM

Yeah more toys eva200 time to get cold.
Thanxs scrag’s, I understand what ya mean, getto is the only way to make these things if you don’t want to spend over $1000 alone in just parts, to pull it apart again to make a change. Its not how it looks it how it runs.
Im currently just trying all different stuff, before I decide on a design I like and works very well. Then I will splash out on nice looks and spiff it all up.
Im basically trying to make these things small compared to what others are making.
Some cascades get way out of hand and are compiled of too many complex designs (expensive)

eva2000 12-08-2005 12:20 AM

Quote:

By kayl
Yeah more toys eva200 time to get cold.
Thanxs scrag’s, I understand what ya mean, getto is the only way to make these things if you don’t want to spend over $1000 alone in just parts, to pull it apart again to make a change. Its not how it looks it how it runs.
Im currently just trying all different stuff, before I decide on a design I like and works very well. Then I will splash out on nice looks and spiff it all up.
Im basically trying to make these things small compared to what others are making.
Some cascades get way out of hand and are compiled of too many complex designs (expensive)

I'm sitting here watching ya and waiting to see what you come up with :D

kayl 12-08-2005 12:58 AM

2 Attachment(s)
thanxs eva, i think you will love this.
its a start. i got some water pipe and expanda foam so by tomorrow i should be cooking/ i mean chilling.
What should i use for coolant and where from?? :D


sorry guys i changed the topic its a water chiller now.
The res is 45cm long and total length is 60cm so 1/2" pipe Stick out each end to attach hoses.
I re-wired the water pump last night and its pumping.
Not sure how long but time to mod up a mini container to stick pump in.
one bit is broken so im gonna have to run submersed

this is the resistor load in action, no insulation just an ice show on me other thread.


All times are GMT +11. The time now is 11:02 PM.

Powered by vBulletin® Version 3.8.10
Copyright ©2000 - 2018, vBulletin Solutions, Inc.