Gigabyte EP45-UD3P memory OC results
This is a discussion on Gigabyte EP45-UD3P memory OC results within the Gigabyte Intel Motherboard / CPU forums, part of the Intel motherboards / CPU category; I've been having pretty nice success with this cheap board ($149.99US) and my Geil DDR2-1160 CAS4 2x1GB kit with D9GMH ...
 |
| | LinkBack | Thread Tools |
12-01-2009, 07:23 AM
| #1 (permalink) |
| Senior Member Join Date: Aug 28 2008
Posts: 426
| Gigabyte EP45-UD3P memory OC results
I've been having pretty nice success with this cheap board ($149.99US) and my Geil DDR2-1160 CAS4 2x1GB kit with D9GMH chips. The kit really seems to be responding to the 1333 OC driving strength profile. First up are DDR2-1300 results which only required 2.40V for single 32M stability! These are the BIOS settings used. Code: ******************************************************* MB Intelligent Tweaker(M.I.T.) ******************************************************* Robust Graphics Booster ..............: Auto CPU Clock Ratio ......................: 8x CPU Frequency ........................: 3.20GHz (434x8) ************** Clock Chip Control ************** >>>>>> Standard Clock Control CPU Host Clock Control................: Enabled CPU Host Frequency (Mhz) .............: 434 PCI Express Frequency (Mhz) ..........: 100 C.I.A.2 ..............................: Disabled >>>>>> Advanced Clock Control.........: [Press Enter] CPU Clock Drive.......................: 800mV PCI Express Clock Drive...............: 900mV CPU Clock Skew (ps)...................: 0ps MCH Clock Skew (ps)...................: 0ps *********** DRAM Performance Control *********** Performance Enhance...................: Standard (G)MCH Frequency Latch................: Auto System Memory Multiplier .............: 3.00A Memory Frequency (Mhz) ...............: 1300 DRAM Timing Selectable ...............: Manual >>>>>> Standard Timing Control CAS Latency Time......................: 5 tRCD .................................: 5 tRP...................................: 5 tRAS..................................: 15 >>>>>> Advanced Timing Control........: [Press Enter] tRRD..................................: Auto tWTR..................................: Auto tWR...................................: Auto tRFC..................................: Auto tRTP..................................: Auto Command Rate (CMD) ...................:Auto >>>>>> Channel A Timing Settings......: [Press Enter] Static tRead Value....................: 7 tRD Phase0 Adjustment.................:Auto tRD Phase1 Adjustment.................:Auto tRD Phase2 Adjustment ................: Auto tRD Phase3 Adjustment.................: Auto Trd2rd(Different Rank)................: Auto Twr2wr(Different Rank)................: Auto Twr2rd(Different Rank)................: Auto Trd2wr(Same/Diff Rank)................: Auto Dimm1 Clock Skew Control (ps).........: Auto Dimm2 Clock Skew Control (ps).........: Auto DDR Write Training....................: Auto >>>>>> Channel A Driving Settings.....: [Press Enter] Driving Strength Profile..............: OC-1333 Data Driving Pull-Up Level............: Auto Cmd Driving Pull-Up level.............: Auto Ctrl Driving Pull-Up Level............: Auto Clk Driving Pull-Up Level.............: Auto Data Driving Pull-Down Level..........: Auto Cmd Driving Pull-Down level...........: Auto Ctrl Driving Pull-Down Level..........: Auto Clk Driving Pull-Down Level...........: Auto >>>>>> Channel B Timing Settings......: [Press Enter] Static tRead Value....................: 7 tRD Phase0 Adjustment.................: Auto tRD Phase1 Adjustment.................: Auto tRD Phase2 Adjustment ................: Auto tRD Phase3 Adjustment.................: Auto Trd2rd(Different Rank)................: Auto Twr2wr(Different Rank)................: Auto Twr2rd(Different Rank)................: Auto Trd2wr(Same/Diff Rank)................: Auto Dimm1 Clock Skew Control (ps).........: Auto Dimm2 Clock Skew Control (ps).........: Auto DDR Write Training....................: Auto >>>>>> Channel B Driving Settings.....: [Press Enter] Driving Strength Profile..............: OC-1333 Data Driving Pull-Up Level............: Auto Cmd Driving Pull-Up level.............: Auto Ctrl Driving Pull-Up Level............: Auto Clk Driving Pull-Up Level.............: Auto Data Driving Pull-Down Level..........: Auto Cmd Driving Pull-Down level...........: Auto Ctrl Driving Pull-Down Level..........: Auto Clk Driving Pull-Down Level...........: Auto ********* Motherboard Voltage Control ********* Voltage Types...........Normal..........Current ----------------------------------------------- >>>>>> CPU Load-Line Calibration.................: Disabled CPU Vcore..............1.31250v......: 1.50000V CPU Termination........1.200v.........: 1.300V CPU PLL................1.500v.........: 1.500V CPU Reference..........0.780v.........: Auto >>>>>> MCH/ICH MCH Core...............1.100v.........: 1.320V MCH Reference..........0.800v.........: Auto MCH/DRAM Ref...........0.900v.........: Auto ICH I/O................1.500v.........: 1.500V ICH Core...............1.100v.........: 1.100V >>>>>> DRAM DRAM Voltage...........1.800v.........: 2.400V DRAM Termination.......0.900v.........: Auto Channel A Reference....0.900v.........: Auto Channel B Reference....0.900v.........: Auto |
|  |
|
12-01-2009, 07:27 AM
| #2 (permalink) |
| Senior Member Join Date: Aug 28 2008
Posts: 426
|
Bumping up vMCH slightly to 1.360V from 1.320V and vDIMM from 2.40V to 2.48V enabled me to pass single 32M at 666MHz CAS5  Code: ******************************************************* MB Intelligent Tweaker(M.I.T.) ******************************************************* Robust Graphics Booster ..............: Auto CPU Clock Ratio ......................: 8x CPU Frequency ........................: 3.55GHz (444x8) ************** Clock Chip Control ************** >>>>>> Standard Clock Control CPU Host Clock Control................: Enabled CPU Host Frequency (Mhz) .............: 444 PCI Express Frequency (Mhz) ..........: 100 C.I.A.2 ..............................: Disabled >>>>>> Advanced Clock Control.........: [Press Enter] CPU Clock Drive.......................: 800mV PCI Express Clock Drive...............: 900mV CPU Clock Skew (ps)...................: 0ps MCH Clock Skew (ps)...................: 0ps *********** DRAM Performance Control *********** Performance Enhance...................: Standard (G)MCH Frequency Latch................: Auto System Memory Multiplier .............: 3.00A Memory Frequency (Mhz) ...............: 1332 DRAM Timing Selectable ...............: Manual >>>>>> Standard Timing Control CAS Latency Time......................: 5 tRCD .................................: 5 tRP...................................: 5 tRAS..................................: 15 >>>>>> Advanced Timing Control........: [Press Enter] tRRD..................................: Auto tWTR..................................: Auto tWR...................................: Auto tRFC..................................: Auto tRTP..................................: Auto Command Rate (CMD) ...................:Auto >>>>>> Channel A Timing Settings......: [Press Enter] Static tRead Value....................: 7 tRD Phase0 Adjustment.................:Auto tRD Phase1 Adjustment.................:Auto tRD Phase2 Adjustment ................: Auto tRD Phase3 Adjustment.................: Auto Trd2rd(Different Rank)................: Auto Twr2wr(Different Rank)................: Auto Twr2rd(Different Rank)................: Auto Trd2wr(Same/Diff Rank)................: Auto Dimm1 Clock Skew Control (ps).........: Auto Dimm2 Clock Skew Control (ps).........: Auto DDR Write Training....................: Auto >>>>>> Channel A Driving Settings.....: [Press Enter] Driving Strength Profile..............: OC-1333 Data Driving Pull-Up Level............: Auto Cmd Driving Pull-Up level.............: Auto Ctrl Driving Pull-Up Level............: Auto Clk Driving Pull-Up Level.............: Auto Data Driving Pull-Down Level..........: Auto Cmd Driving Pull-Down level...........: Auto Ctrl Driving Pull-Down Level..........: Auto Clk Driving Pull-Down Level...........: Auto >>>>>> Channel B Timing Settings......: [Press Enter] Static tRead Value....................: 7 tRD Phase0 Adjustment.................: Auto tRD Phase1 Adjustment.................: Auto tRD Phase2 Adjustment ................: Auto tRD Phase3 Adjustment.................: Auto Trd2rd(Different Rank)................: Auto Twr2wr(Different Rank)................: Auto Twr2rd(Different Rank)................: Auto Trd2wr(Same/Diff Rank)................: Auto Dimm1 Clock Skew Control (ps).........: Auto Dimm2 Clock Skew Control (ps).........: Auto DDR Write Training....................: Auto >>>>>> Channel B Driving Settings.....: [Press Enter] Driving Strength Profile..............: OC-1333 Data Driving Pull-Up Level............: Auto Cmd Driving Pull-Up level.............: Auto Ctrl Driving Pull-Up Level............: Auto Clk Driving Pull-Up Level.............: Auto Data Driving Pull-Down Level..........: Auto Cmd Driving Pull-Down level...........: Auto Ctrl Driving Pull-Down Level..........: Auto Clk Driving Pull-Down Level...........: Auto ********* Motherboard Voltage Control ********* Voltage Types...........Normal..........Current ----------------------------------------------- >>>>>> CPU Load-Line Calibration.................: Disabled CPU Vcore..............1.31250v......: 1.50000V CPU Termination........1.200v.........: 1.300V CPU PLL................1.500v.........: 1.500V CPU Reference..........0.780v.........: Auto >>>>>> MCH/ICH MCH Core...............1.100v.........: 1.360V MCH Reference..........0.800v.........: Auto MCH/DRAM Ref...........0.900v.........: Auto ICH I/O................1.500v.........: 1.500V ICH Core...............1.100v.........: 1.100V >>>>>> DRAM DRAM Voltage...........1.800v.........: 2.480V DRAM Termination.......0.900v.........: Auto Channel A Reference....0.900v.........: Auto Channel B Reference....0.900v.........: Auto |
|
| |
|
12-01-2009, 09:26 PM
| #4 (permalink) |
| Administrator |
Nice clocks there mate, same as my EP45 Extreme, maxed out at 666Mhz 5-5-5-x for Super Pi 32M stable with my Crucial Ballistix PC2-8500 Tracer and Non-Tracers and Team DDR3-13000Mhz kits! For me drive strength and mem clock skew didn't do anything either heh |
| |
|
12-01-2009, 11:12 PM
| #5 (permalink) |
| Senior Member Join Date: Aug 28 2008
Posts: 426
| By eva2000 Well, the 1333 drive strength profile worked well with the Geil kit, but not so much my others. For instance, with my OCZ Flex 9200 kit, I got a lot more errors in test #5 and got errors in test #4 in Memtest; setting the drive strength profile to auto at the same VDIMM setting greatly decreased the #5 errors and eliminated the errors in test 4.
|
|
| |
|
| Bookmarks |
| Tags |
| ep45ud3p, gigabyte, memory, results |
« Previous Thread
|
Next Thread »
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
Similar Threads for: Gigabyte EP45-UD3P memory OC results
| ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Initial notes, findings and tips DFI UT X58-T3EH8 | eva2000 | DFI Intel Motherboard / CPU | 0 | 04-08-2009 03:17 PM |
| Core i7 and Games, Memory Testing 6GB vs 3GB | Yellowbeard | DDR3 Intel Memory | 8 | 30-01-2009 04:51 PM |
| AMD64 Overclocking Guide (07/11/06) | eva2000 | General AMD Motherboards / CPU | 7 | 02-11-2006 04:42 PM |
All times are GMT +11. The time now is 01:44 PM.
