voltmod wire

27-03-2008, 03:20 PM #1 (**permalink**)

where is best place to find it..i went to jaycar today and nuthing that tiny there??

27-03-2008, 03:26 PM #2 (**permalink**)

How "small?" wire from ethernet cables?

27-03-2008, 03:45 PM #3 (**permalink**)

Nice tip thanks ....ill go have a look at a old cable

Hori

27-03-2008, 06:32 PM #4 (**permalink**)

http://www.jaycar.com.au/productView...p+wire&SPECIAL

27-03-2008, 09:54 PM #5 (**permalink**)

Thanks Tuchan ..Bugger me i was there today stocking up on bits n pieces..i could not see anything like that..ill head back and Ask next time

The Cat 5 cable is over double the size of what i have here done a few test on old board

and i know it is way to thick

Also the usual trimpots i could not find at Jaycar either !! i got 6 others in variouse resistance ...Sort of just nutting out how they work and im moving along nicely..

But the ones i got would be to awkward to mount or seal from acidental knocks

28-03-2008, 11:29 AM #6 (**permalink**)

At my local Jaycar shop, most of the trim pots are all behind the counter, you may need to ask for them also.

28-03-2008, 09:16 PM #7 (**permalink**)

How about HDD/IDE cable ???

10:37 PM

I got some perfect wire from Jaycar today i just had to ask ..also i got correct trimpots..

im on the P5b D atm with succesfull Vcore mod.
Vcore mod with trimpot mis a awsum thing to do...i can control even in windows with just a small screw driver ..to adjust up or down depending on what or how much i need for each particular benchmark run,,,,