7ornado

you're always on work in progress with you're i7 platform
not find a good kit yet?

okorop

I want the best :asd:

nut311

same with me

how is Mushkin 1600 7-8-7-20? on Newegg $199 got 3x2Gb?

Hi eva this Apogee DDR3 Triple Kit

http://www.chaintech.com.tw/a211_pro...te2.php?pos=96

eva2000

I think Mushkins 7-8-7-20 could be Micron D9 still ????

Got the Apogee listed under Walton Chaintech

dalmoste

Hi, anyone tried the Team Xtreem 3x1gb 1866 ?

I have this kit with a DFI T3eH6 and i920 and i'm not able to run at the specs 2T 9-9-9-24 v 1,65.

I tried
- BLCK 133, BLCK:RAM 1:7
- BLCK 155, BLCK:RAM 1:6
- BLCK 187, BLCK:RAM 1:5
and windows not start or freeze after few seconds.

For stability i have to set VTT voltage to 1,40 and DRAM voltage to 1,755 ... I think they are too higher for the default ...

RAM at 1600 seems OK but higher always fails

Any ideas?
Bad ram? BIOS problem? Motherboard problem?

eva2000

Hi dalmoste and welcome

For DDR3-1800 and higher speeds most likely you'd need CPU VTT >1.4 even up to 1.5-1.6v depending on quality of your CPU's memory controller. Also some i7 cpus like vcore and cpu vtt closer together i.e. 1.3-1.4v vcore with cpu vtt 1.4v.

Also UT X58-T3EH8 tips may apply to your DK X58 board here i.e. swapping modules around in same dimm slots to see which combination clocks best etc.

If you need more in depth help, start a new thread in DDR3 forum here http://i4memory.com/f83/ and post your hardware specs and bios settings etc

HTH

George

dalmoste

Ok, thank you very much.

I'm starting to read your tips and this evening I'll try it and eventually post my results

DrNip

I just picked up a set of the Kingston HyperX KHX16000D3ULT1K3/3GX the other day. They appear to be the same as the DDR3 2000 3x2GB cas 8 Elpida's but 3x1GB's. The price was right for me. Just a heads up.