3x1GB Micron D9GTR @DDR3-2076Mhz 8-8-8-21

30-12-2008, 04:22 AM #1 (**permalink**)

Triple Channel (Micron D9GTR)

High voltage benching time with mix and matched 2x1GB Cellshock PC3-14400 8-7-6-21 1.9v + 1GB OCZ PC3-14400 Platinum 8-8-8-24 (3x1GB Micron D9GTR) on DFI LP UT X58-T3EH8 motherboard!

System specs

Intel Core i7 920 3836A756
Thermalright Ultra 120 Extreme + LGA1366 Bolt Thru kit
DFI LP UT X58-T3EH8 R.A51
HIS HD4870x2 stock hsf
2x1GB Cellshock PC3-14400 8-7-6-21 1.9v + 1GB OCZ PC3-14400 Platinum 8-8-8-24 (3x1GB Micron D9GTR)
750GB Samsung HD753LJ
Pioneer DVD-RW
1KW Corsair HX1000 psu
WinXP Pro SP3 nLite fully updated

My fastest sub 4Ghz 32M time @999.3Mhz 8-8-7-21 at 2.025v bios set vdimm

@1014Mhz 8-8-8-21 at 2.025v bios set

30-12-2008, 04:23 AM #2 (**permalink**)

New PB for 8-8-8-21 frequency @1026Mhz at 2.07v bios set vdimm. Compared to 920 @4410Mhz with 2x1GB Samsung HCF0 based memory @1050Mhz 9-9-9-24 at 1.875v bios set vdimm.

Finally, max Everest benched @1038Mhz 8-8-8-21 at 2.085v

30-12-2008, 06:45 AM #3 (**permalink**)

Good results there George , those D9s are screaming bro.

30-12-2008, 09:39 PM #4 (**permalink**)

thanks.. they certainly are... next up 3x1GB G.Skill PC3-12800HZ Micron D9JNM triple channel

16-02-2009, 08:52 PM #5 (**permalink**)

So you reckon the Micron DDR3 modules are as good as the Elpida ones?

16-02-2009, 10:08 PM #6 (**permalink**)

For i7/x58 nope Micron won't be as good for high frequency as Elpida especially with CAS7. Not sure about CAS6.

For CAS8 to a certain point, Samsung HCF0 would keep up with Elpida's new 50nm ICs.

Out of all ICs, from least vdimm memory voltage to most would be Elpida, Samsung HCF0 then Micron D9xxx