W3520 H20 @4877Mhz - DFI UT X58-T3EH8 !
This is a discussion on W3520 H20 @4877Mhz - DFI UT X58-T3EH8 ! within the DFI Intel Motherboard / CPU forums, part of the Intel motherboards / CPU category; Time to really push my W3520 on H20 cooling still. Managed to break alot of personal best benchmarks for max ...
 |
| | LinkBack | Thread Tools |
03-06-2009, 08:51 PM
| #1 (permalink) |
| Administrator |  W3520 H20 @4877Mhz - DFI UT X58-T3EH8 !
Time to really push my W3520 on H20 cooling still. Managed to break alot of personal best benchmarks for max validation, max uncore frequency achieved, Super Pi 1M, 32M and Pi Fast on i7/X58 platform 
System:
Max Validation @4877Mhz at 1.584v Max Uncore Frequency @4645.6Mhz   Super Pi 1M & PiFast @4802Mhz at 1.584v   Super Pi 32M @4794Mhz at 1.552v  Super Pi 32M @4677Mhz at 1.488v  Max Bclk Validation So far 235bclk is max for validation. Messing with voltages to see if I can get more   |
| Last edited by eva2000; 04-06-2009 at 02:22 AM. | |
|  |
|
03-06-2009, 10:42 PM
| #2 (permalink) |
| Administrator |
Will try higher clocks this weekend as forecast has some nice cold night time weather coming my way http://www.weatherzone.com.au/local/...=aploc&lc=9647  |
|
| |
|
03-06-2009, 11:27 PM
| #3 (permalink) |
| Junior Member Join Date: Mar 28 2009 Location: Hiroshima
Posts: 29
| By eva2000 hahahhahaah
i smell 5GHz |
|
| |
|
03-06-2009, 11:37 PM
| #4 (permalink) |
| Administrator |
hehe I wish I need to get past my current bclk limit of around 230-235bclk. over@locker886 did 254bclk on DFI UT X58-T3EH8 but used LN2 and way more IOH volts at 1.39v than I'm use to (max I've used around 1.25v).
|
|
| |
|
03-06-2009, 11:53 PM
| #5 (permalink) |
| Junior Member Join Date: Mar 28 2009 Location: Hiroshima
Posts: 29
| By eva2000
ouchhh, bclk @ 250MHz isnt Classified territory? Oo have you tried a sub zero or near zero cooling? here is my 5Ghz on Biostar Tpower X58 http://img197.imageshack.us/img197/6043/imagem3y.jpg under LN2 and its the limit for Tpower  |
|
| |
|
03-06-2009, 11:59 PM
| #6 (permalink) |
| Administrator |
Yeah highest bclk i've seen for DFI UT X58-T3EH8. I'd be happy with 240bclk for super pi 32M Nah haven't tried sub zero on 1366 as my Kayl 1/4HP SS unit only has LGA775 mount/evap. Need to eventually get a 1366 mount/enclosure for the unit or get a colder unit ordered/built by Kayl hehe. Haven't used DI/LN2 before either so still AIR/H20 guy mainly .. for now at least Trying to see if can get more on bclk Max Bclk Validation So far 235bclk is max for validation. Messing with voltages to see if I can get more |
| Last edited by eva2000; 04-06-2009 at 02:23 AM. | |
|
| |
|
05-06-2009, 02:14 AM
| #7 (permalink) |
| Senior Member Join Date: Mar 25 2009 Location: Oklahoma City
Posts: 252
|
Here is what I used to get 237 BCLK. I booted at 220 BCLK then SetFSB the to 237 BCLK. Code: Genie BIOS Setting CPU Feature Set VR Current Limit Max: Disabled Thermal Management Control: Disabled EIST Function: Enabled CxE Function: Disabled Execute Disable Bit: Disabled Virtualization Technology: Disabled TDC Enable: Disabled x TDC Limit: 0 TDP Enable: Disabled x TDP Limit: 0 ***** Logical Processor Setting ***** Intel HT Technology: Enabled Active Processor Cores: All DRAM Timing Memory Control Setting: AUTO Memory LowGap: 1536M DRAM Command Rate: AUTO CAS Latency Time (tCL): 8 RAS# to CAS# Delay (tRCD): 8 RAS# Precharge (tRP): 8 Precharge Delay (tRAS): 24 REF to ACT Delay (tRFC): AUTO Write to PRE Delay (tWR): AUTO Rank Write to Read (tWTR): AUTO ACT to ACT Delay (tRRD): AUTO Row Cycle Time (tRC): AUTO Read CAS# Precharge (tRTP): AUTO Four ACT WIN Time (tFAW): AUTO Voltage Setting O.C. Shut Down Free: Enable O.C.S.D.F CPU VID Control: 1.45v CPU VID Special Add Limit: Enabled CPU VID Special Add: 103.30% Vcore Droop Control: Enabled DRAM Bus Voltage: 1.71v DRAM PWM Switch Frequency: Nominal DRAM PWM Phase Control: 2 Phase Operation CPU VTT Special Add: AUTO CPU VTT Voltage: 1.56v VTT PWM Switch Frequency: Nominal VTT PWM Phase Control: 2 Phase Operation CPU PLL Voltage: 1.80v IOH/ICH 1.1V Voltage: 1.31v IOH Analog Voltage: 1.25v ICH 1.5 Voltage: 1.7v ICH 1.05V Voltage: 1.05v DIMM 1/2 DQ/DQSTB Bus VREF: -00.0% DIMM 3/4 DQ/DQSTB Bus VREF: -00.0% DIMM 5/6 DQ/DQSTB Bus VREF: -00.0% ADDR/CMD VREF Control: Disabled x DIMM 1/2 ADDR/CMD Bus VREF: 110 x DIMM 3/4 ADDR/CMD Bus VREF: 110 x DIMM 5/6 ADDR/CMD Bus VREF: 110 CPU QPI Drive Strength: Normal IOH QPI Drive Strength: Strong Exit Setup Shut down: Mode 2 O.C. Fail Retry Counter: Enabled O.C. Fail CMOS Reload: Disabled PPM Function: Enabled Turbo Mode Function: Enabled 1 core Max Turbo Ratio: 22x 2 core Max Turbo Ratio: 21x 3 core Max Turbo Ratio: 21x 4 core Max Turbo Ratio: 21x CPU Non-Turbo Clock Ratio: 20 * BCLK/UCLK/QPI Controller Settings * QPI Control Settings: Enabled QPI Link Fast Mode: Enabled QPI Frequency: AUTO CPU Base Clock (BCLK): 220 Mhz Boot Up CPU Base Clock: AUTO PCIE Clock: 110 Mhz DRAM Frequency: 8 UnCore Frequency: 16 CPU Spread Spectrum: Disabled PCIE Spread Spectrum: Disabled QPI Control Settings: Disabled DRAM Frequency: 6 UnCore Frequency: 14 |
|
| |
|
| Bookmarks |
| Tags |
| 3845a935, corsair domainator gt, cpuz validation, dfi ut x58, super pi 32m, w3520 |
« Previous Thread
|
Next Thread »
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
Similar Threads for: W3520 H20 @4877Mhz - DFI UT X58-T3EH8 !
| ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| [Techpowerup.com] DFI LanParty X58 UT T3eH8 Pictured | News | Reviews & News Online | 1 | 16-04-2010 07:08 AM |
| DFI X58 T3eH8 WRONG BIOS | sammurai | DFI Intel Motherboard / CPU | 7 | 06-01-2010 03:03 AM |
| DFI X58 UT T3eH8 no support | Older | DFI Intel Motherboard / CPU | 2 | 21-10-2009 04:02 AM |
| X58 motherboard - real user feedback and comments | eva2000 | General Intel Motherboards / CPU | 6 | 29-03-2009 02:47 PM |
| [Bit-tech.net] First Look: DFI LANParty UT X58 T3eH8 | News | Reviews & News Online | 0 | 18-11-2008 11:02 PM |
All times are GMT +11. The time now is 09:00 PM.
