eva2000

What better to do on Boxing day morning than some benchies

Notes

1. OCZ PC3700 Gold rev2 was able to do 2-3-2-5/6 at DDR400 and 2.5-3-3-7 at DDR466 at low vdimm of 2.7v on AI7 and do 3-3-3-8 at DDR500 on AI7 in dimm slot 2+4 at 2.9v in bios (uGuru reports 2.85v vdimm)

2. This is 256MB single sided memory so bare that in mind when you see memory bandwidth compared to double sided rev1 OCZ PC3700 Golds

3. Memory was very picky about GAT settings didn't like Turbo or anything at all from what i tested so far.. need a bit more testing to see.




2x 256MB OCZ PC3700 Gold rev2

2.4C Q322A285
Abit AI7 14bios
128MB Gigacube 9600PRO stock
80GB WD 800JB
550W Antec TC psu

vcore = 1.525v
vdimm = 2.7v
vAGP = 1.65v

GA = AUTO
Refresh Cycle Time = Enhanced
Read Delay = AUTO
Read Delay Adjust = Disabled
Command Per Clock = Disabed

NB Strap = 667FSB

2x 256MB OCZ PC3700 Gold rev2
1:1 @ 233mhz 2.5-3-3-7

Sandra 2004 STD

eva2000

The whole point is BH-5 is running out of supply. This rev2 memory is capable of DDR500 at 3-3-3-8 at ~2.8-2.85v depending on board and is a good alternative to the Hynix D43 2.5-4-3-8 to 3-4-4-8 timings at >= 250mhz. At the same time this rev2 can do relatively tight 2-3-2-5/6 timings at DDR400 at 2.7v

Unfortunately on this AI7 at > 233mhz i have to use NB Strap of 800FSB which disables PAT and the scores drop. This one limitation of the AI7 board. Will test on other boards.

vcore = 1.675v
vdimm = 2.9v (windows 2.85-2.87v)
vAGP = 1.65v

GA = AUTO
Refresh Cycle Time = Enhanced
Read Delay = AUTO
Read Delay Adjust = Disabled
Command Per Clock = Disabed

NB Strap = 800FSB

2x 256MB OCZ PC3700 Gold rev2
1:1 @ 250mhz 3-3-3-8

Sandra 2004 STD
Buffered and Unbuffered