About This BIOS:
. September 11, 2006
. BX97510J.86A.1378.2006.0911.1542
. SATA RAID info:
. Intel(R) RAID for SATA - v5.6.2.1002
. Silicon Image RAID for SATA - v5.2.11
. Initializing Intel(R) Boot Agent GE v1.2.28
New Fixes/Features:
. Fixed an issue where S3 resume did not work with dual core processors.
. Added setup option to control Power LED Off/Blink in S3 state.
. Updated Heceta6 BMI sequence

BIOS Version 1441

About This BIOS:
. October 25, 2006
. BX97510J.86A.1441.2006.1025.1410
. SATA RAID info:
. Intel(R) RAID for SATA - v5.6.2.1002
. Silicon Image RAID for SATA - v5.2.11
. Initializing Intel(R) Boot Agent GE v1.2.28
. Intel® Active Management Technology info:
. Intel® AMT BX Firmware: v1.2.3

New Fixes/Features:
. Added PEG port Power Management Tab in Device Manager.
. Fixed consecutive read and/or writes of password supplied secure
variables.
. Added Thermal Diode support for new processors.
. Fixed issue where TPM Physical Presence was not cleared and locked
intermittently at the end of POST.
. Added workarounds to fix several TPM issues including unreliable
enabling/disabling and PCRs not getting cleared at system reset
intermittently.
. If the system is in manufacturing mode, do not disable TPM INT1A
interface if the BIOS SETUP TPM Enabled question is set to
"Disabled".
. Fixed no BIOS SETUP text after first remote AMT SOL request to
enter BIOS SETUP.
. Fixed an issue where S3 resume did not work with dual core
processors.
. Added support for future operating system SLP 2.0 for standard
product Intel Desktop Boards BIOS.
. Supports OEM Activation 2.0. For details on the OEM Activation
Program, send email to oasignh@microsoft.com
. Fixed issue where changing certain Setup Options and using F10 to
Save and Exit would not cause a system reset.
. Removed redundant SDRAM references from Memory Configuration page
in Setup.
. Fixed SMBIOS HCT failure where Type 0 "Enable Targeted Content
Distribution" bit is not set (for future operating system).
. Fixed issue where disk partitions are sometimes not seen during
operating system installation.
. Fixed potential issue where Heceta6 not functional after S3.
. Fixed issue where S3 did not work with certain processors.
. Added setup option to control Power LED Off/Blink in S3 state.
. Updated Heceta6 BMI sequence
. Fixed issue where operating system could not initialize TPM 1.2
for BitLocker support.