eva2000

sweet - jots down mental note = 3914A

Benji Tshi

4075Mhz 1.2v, trying 4000Mhz 1.18v

But i must try again the 3901 because i can't beleive it's so bad :/

Benji Tshi

DFI Lanparty UT X58 T3eH8 (bios 508)
Mushkin Redline 3X2Gb 15000 7-7-6-20 (998727, BBSE)
i7 920 3914A114
Cooler Master V10 (ambiant temp around 26° no thermometer to confirm)

Voltages (full) :
vcore : 1.18
vdimm : 1.66
vqpi : 1.29
vpll : 1.84
vioh : 1.13

Burning with LinX, CPUZ give me 1.15v whereas multi measure give me 1.18v...Idle, it's 1.18v CPUZ and 1.2v multi.



32M @4200 with the same settings (just increase bclk via setfsb) but it failed @4300. I believe it was bclk limited because i wasn't able to boot over 215mhz...I reach 225 stable Linx with the T3eH6 but i can't get more than 200 on T3eH8 atm...I have to look at this more closely

eva2000

woah 69-75C at 4ghz 1.152v! hot bugger! But guess within normal range considering my W3520 4ghz at 1.184v on water cooling was 57-60C.

Benji Tshi

Yep, i think it's not really surprising. 975 3845 and 920 3901 are about the same range...

This 920 3901 is the crappiest i ever seen : 3800Mhz 1.31v,higher will fail.
975 is not so bad, but not as good as golden 920, it's something like 4G 1.23v (72-77°)

eva2000

i thought 975 3845 would be good or that might be 3845A > 3845B ?

Benji Tshi

Dunno...But for sure, we'll learn more tomorrow evening, tomorrow morning, i'll have 40L of LN2 to test it with this lovely T3eH8 (i just find how to set more than x25 multi !)

fatguy1992

I'm doing some pretesting on my new 920 D0 and Classified. Just going quick prime 95 session right now.



3.0GHz with 0.964vcore and all the other volts are at stock or under stock.

EDIT:

Just did 3.1GHz with the same settings.



EDIT 2:

Just did 3.2GHz with the same settings



So do I have a alright chip?