HighAce

HighAce

Just had a bit more of a play with the DQ6, dropped multi down to 8x 400 and still no boot, even with Vcore at 1.35v, so dropped to 7x 400 and booted not problems, so far using SETFSB i'm up to 430

http://i114.photobucket.com/albums/n...hAce04/430.jpg

Now up to 460

http://i114.photobucket.com/albums/n...hAce04/460.jpg

UPDATE:

Now on 490FSB

http://i114.photobucket.com/albums/n...hAce04/490.jpg

alpha0ne

All you have to do now is get it to ~ 460 using the x9 multi

HighAce

Yeah be nice to be able to use the 9x, but from what i have read up on over at XS most with this mobo are reporting better o/c and higher FSB using lower multi's, i managed to get to 495 before it gave in, mind you that was only upping Vcore to 1.35v, everything else was default settings and ram was also at default.

Will have a bit more of a play round with it and see if i can't at least get the 8x to work, but wont spend to much time on it as i have my nice new P5B DLX to test yet.

alpha0ne

Ooooo send it to me send it to me

HighAce

Noooo you would torture the poor thing to much, or sacrifice it to the o/c gods

alpha0ne

Who me ???

HighAce

Tried playing around with 8x multi today but could only get as far as 433, 1 step over and it crashed out every time no matter what voltage settings i tried, seem's it loves the lower multis as on 7x i am able to get to about 495 before it has problems , it's annoying not being able to drop the ram divider down any lower, might have to invest in some higher speed ram i think!

http://i114.photobucket.com/albums/n...4/686ad4b7.jpg