dinos22

just do 8M that's what i do (on work days) and they are reflective of 32M runs too

MrRevhead

4-4-4-12 @ 537mhz (2:3)



Max SuperPi stable with 4 modules on 4-4-4-12. 540mhz boots into Windows, but crashes during SuperPi.

Going to play a bit more with CAS 5 and try to break the 600mhz barrier.

dinos22

got the second stick

dinos22

MrRevhead

Very nice sticks Dinos

Is that still with all chipset voltages left on auto besides vMCH?

I will pull a pair out and try some 2 x 512MB & single channel clocking today to see if I can get any higher.

dinos22

yeah still the same voltages

noticed single channel and dual channel clocks are almost the same too as the weaker chip maxed out at 485 4-4-4-x

MrRevhead

Results with the first 2 x 512MB pair:

4-4-4-12 @ 552mhz (2:3)



n.b Memset speed (mhz) reading is incorrect

Still to try the other 2 sticks.

dinos22

hey Mr Rev

if you want to speed up testing just use Memtest 1.65, set it to 2:3 ratio and those volts, turn off all unecessary stuff in bios and keep going at it in 3MHz increments (FSB) and to memtest with 1xloop of test#5 until it errors

then go back to previous clean speed and that should be 32M stable in windows......

i was testing the new stick alone first as you do and i forgot i only put 2.25v only and my memtest at 4-4-4-x timings was topping out at 575MHz so i thought i had dud stick here

hahahah (well not dud but you know what i mean)

i reckon they will all do what mine do....just give it an extra kick