SLi_dog

Hi Guys,
I got some new hardware. Pics taken with camera phone so not the best quality.




SuperPi 1M stock out the box




SuperPi 8M stock out the box




SuperPi 32M stock out the box




SuperPi 32M 3.79GHz -- FSB344x11 : RAM516 4-4-4-11 -- 13m 23.609s

SLi_dog

Aquamark using the Nvidia 85.96 SLI mod drivers created by Big_Sam at XS

Aquamark @4.48Ghz



Max CPU (ATM ) Pi scores using Vapochill LightSpeed.












Dual 32M at 4.13GHz



Max CPU (ATM ) Pi scores using Dry Ice in a K2-b made by kayl.

ArcTan

damn I'm only stuck with a E6600 and p5B deluxe

Jammer

Fully f'n jealous!

C'mon Sli, clock her up, I wanna get one of those mobos. But first, my 4GB RAM.

SLi_dog

Don't wanna fry it. She should be running very cold soon.


Max voltages available in BIOS.

RAM: 2.4V (in 0.05V steps)
CPU VCore: 1.7V (in 0.125V steps)
FSB Termination Voltage: 1.5V (in 0.1V steps) What's is this???
MCH Chipset Voltage: 1.8V (in 0.1V steps)
ICH Chipset Voltage: AUTO, 1.05V and 1.20V What's this also?

Other notables ATM;
CPU Frequency: 100-550
CPU "unlocked" multi: 6x to 11x ---- WTF 11x multi maximum on an Intel extreme CPU??????


What's are the max safe voltages for MCH?

ArcTan

probably needs a new bios?
btw what are you cooling your x6800 with to use 1.7v?

SLi_dog

They're just the max available setting in the BIOS. I couldn't find it anywhere before buying this board so I thought I'd provide it. Gunna put it under Vapochill LS ASAP.

What's the max MCH voltage that's safe? Been looking everywhere and can't find info on it. I've got it at 1.6V ATM.

RodneyJM

I had my 975X on the MSI conroe board up to 1.75 while benching & thats with factory passive heatsink on it but excellent case ventilation from the CM stacker side panel & crossflow fans.
That was to boot at 416mhz FSB @ 1:1. It would have booted higher but board was limited to 1.58vCore.
But to boot at 400mhz FSB - 1.65v should be good enough.