graham_h

I thought we could use a new thread.
I've got lost in some of Georges !!

Anyways, for a 24/7 setup I'd reckon 3,6Ghz and 600Mhz for ram would be nice.

Where to start ?
Small tweaks would also be nice :-) What to keep on auto and what not.

Some info I've flogged from an older thread. (thanks Hornet)

Settings:


Quote:
JumperFree Configuration Settings
AI Overclocking: Manual
CPU Ratio Control: Manual
- Ratio CMOS Setting: 9
FSB Strap to Northbridge: AUTO
FSB Frequency: 400
PCI-E Frequency: 102
DRAM Frequency: DDR2 1200
DRAM Command Rate: 2T
DRAM Timing Control: Manual
CAS# Latency: 5
RAS# to CAS# Delay: 5
RAS# Precharge: 4
RAS# Activate to Precharge: 9
TWR: 3
TRFC: 30
TWTR: 3
TRRD: 3
TRTP: 6
DRAM Static Read Control: Enabled

Transaction Booster: AUTO
Clock Over-Charging Mode: AUTO

CPU Spread Spectrum: Disabled
PCIE Spread Spectrum: Disabled

CPU Voltage: 1.4375v
CPU Voltage Reference: AUTO
CPU Voltage Damper: Enabled
CPU PLL Voltage: 1.50
DRAM Voltage: 2.30
FSB Termination Voltage: 1.20
North Bridge Voltage: 1.25
North Bridge Voltage Reference: AUTO
South Bridge Voltage: 1.05

Advance CPU Settings
CPU Ratio Control: Manual
- Ratio CMOS Setting: 9
C1E Suppport: Disabled
Max CPUID Value Limit: Disabaled
Vanderpool Technology: Disabaled
CPU TM Function: Enabled
Execute Disable Bit: Enabled
PECI: Disabled

USB Configuration
USB Functions: Enabled
Legacy USB Support: Disabled

graham_h

those settings above didn't work for me.......... just locked up
I'm this far so far with minimal tweaks.
Idea is to be 100% Othos stable (****e the ram got hot !!)

eva2000

heh

what bios you using ? try loosening TRTP to 8 and it may drop vdimm required and increase stability

graham_h

thanks George
Using 0404 bios
I'll see how I go

Anyone else comment ?

eva2000

ah 0404 runs tigher latencies by default so same 0311 bios settings might not be as stable on 0404 ... so you'd want to loosen subtimings a tad to get more stability on 0404 than on 0311 bios

Read P5K Deluxe 0403 / 0404 bios released > http://i4memory.com/f54/p5k-deluxe-0403-0404-bios-released-4161-post68161/#post68161

graham_h

thanks again George

alpha0ne

Could you shore a coretemp ss in your ss please Grahem

What cooling ???.............air ???

graham_h

went a bit Ghetto with the ram cooling



other info below. Temps are at tuniq's lowest setting.