|
Re: Asus P5K Deluxe - Intel P35 Bearlake + Intel E6600 B1 ES
|
11-05-2007, 11:52 AM
#25 (permalink)
|
2x1GB Twin2X2048-10000C5DF Dominator
Asus P5K Deluxe 0311 bios
I decided to revisit my 2x1GB Twin2X2048-10000C5D Dominator memory rated at DDR-1250Mhz 5-5-5-18 at 2.4v (kindly supplied by Corsair
).
Originally, even with 0311 official bios the 10000C5D Dominators were a bit more than flaky on P5K Deluxe - understandably so as 10000C5D Dominators are validated only on eVGA 680i motherboards. But it seems now that I am retesting them in black dimm slots instead of yellow dimm slots, they're alot more stable particularly at 4-4-4-x timings needing less vdimm and clocking a bit tighter on memory timings in black dimm slots than in yellow dimm slots!
Note, prior to these tests all my 2x1GB memory testing to date on P5K Deluxe has been in the yellow dimm slots.
System
I managed to pull off some quick tests for low clock Super Pi Challenge @3600Mhz and managed my fastest Super Pi 1M and 32M times to date for a quad core Kentsfield Q6600 cpu
CPUZ Validation
Super Pi 1M
Super Pi 32M
From my experience on Asus P5B Deluxe, quad core kentsfield B3 stepping is around 10-20 seconds slower clock for clock than core 2 duo B2 dual core cpus. And even my personal best E6700 B2 dual core time on P5B Deluxe @3600Mhz is only
13min 08ish.
Will have to do some more tests with black dimm slots it seems
Edit: okay confirmation from bingo13/Gary from Anandtech
here, black dimm slots are designed to do this according to Asus!
Originally Posted by bingo13
The black slots are required for high memory clocks or stable low latency settings on either P5K board, in fact on the P5K3, the only way to get above 1800 in dual channel mode is to use the black slots. ASUS has the official explanation coming shortly... 
|
Edit 2: Yup can confirm now black dimm slots rule for 10000C5D Dominators on P5K Deluxe
Black dimm slot = 625mhz 5-5-5-15 3-30-3-3-8 at 2.4v memtest able
Yellow dimm slot = 590mhz 5-5-5-18 10-42-10-10-11 at 2.45v semi stable in memtest
Huge difference!
2x1GB Twin2X2048-10000C5DF Dominator
Asus P5K Deluxe 0311 bios
More tests to confirm that indeed
black dimm slots on Asus P5K Deluxe seem to clock these 10000C5D Dominators alot higher with tighter timings and lower vdimm than yellow dimm slots.
System
Corsair 10000C5D Dominators:
Using memtest86+ v1.70:
Yellow slots = 590mhz 5-5-5-18 10-42-10-10-11 at 2.45v memtest semi stable
Black slots = 625mhz 5-5-5-15 3-30-3-3-8 at 2.4v memtest able
In windows had to loosen the subtimings up and drop the clocks a bit for 2.4v vdimm but still @620Mhz 5-5-5-15 8-30-8-8-8 at 2.4v is much better than Yellow slots @590mhz 5-5-5-18 10-42-10-10-11 at 2.45v which was only semi stable in memtest.
JumperFree Configuration Settings
AI Overclocking: Manual
CPU Ratio Control: Manual
- Ratio CMOS Setting: 9
FSB Frequency: 388
PCI-E Frequency: 100
DRAM Frequency: DDR2-1242
DRAM Command Rate: 2T
DRAM Timing Control: Manual
CAS# Latency: 5
RAS# to CAS# Delay: 5
RAS# Precharge: 5
RAS# Activate to Precharge: 15
TWR: 8
TRFC: 30
TWTR: 8
TRRD: 8
TRTP: 8
DRAM Static Read Control: AUTO
Transaction Booster: AUTO
Boost Level: N/A
Clock Over-Charging Mode: AUTO
CPU Spread Spectrum: Disabled
PCIE Spread Spectrum: Disabled
CPU Voltage: 1.475v
CPU Voltage Reference: AUTO
CPU Voltage Damper: Enabled
CPU PLL Voltage: 1.50
DRAM Voltage: 2.4
FSB Termination Voltage: 1.40
North Bridge Voltage: 1.55
North Bridge Voltage Reference: AUTO
South Bridge Voltage: 1.20
Advance CPU Settings
CPU Ratio Control: Manual
- Ratio CMOS Setting: 9
C1E Suppport: Disabled
Max CPUID Value Limit: Disabled
Vanderpool Technology: Disabled
CPU TM Function: Disabled
Execute Disable Bit: Disabled
PECI: Disabled
USB Configuration
USB Functions: Enabled
Legacy USB Support: Disabled (need to enable it to detect USB flash drives)
|
CPUZ Validation
Everest Ultimate
Short Prime95 v25.2 blend test
Super Pi 32M Single & Dual
Single 32M
Dual 32M
half way mark
Complete
Sandra XI SP2
Buffered
Unbuffered
Latency
Cache & Memory
.
