Asus P5K Deluxe - Intel P35 Bearlake + Intel E6600 B1 ES / Q6600 Kentsfield / X6800

16-07-2007, 07:47 PM #**233** (**permalink**)

well they help with higher or more stable max CPU FSB and memory overclocking mhz

16-07-2007, 08:41 PM #**234** (**permalink**)

Then for 9x400@ddr1200 I should use AUTO?

16-07-2007, 08:50 PM #**235** (**permalink**)

yup. i only use the non-AUTO ref volts after i've maxed out my max FSB for each cpu i test

16-07-2007, 11:25 PM #**236** (**permalink**)

eva only more thing.

CPU PLL Voltage

That value use for 400/450 FSB?

17-07-2007, 01:26 AM #**237** (**permalink**)

for CPU PLL depends on your cpu itself every cpu is different but i use 1.5v which from 0311 bios is enough to max out my cpu's FSB... raising to 1.8v only gives me another 3-10FSB more from max FSB at 1.5v CPU PLL voltage.

17-07-2007, 10:53 AM #**238** (**permalink**)

Hi. Im new to this forum eva 2000 but I bet youve seen me before (At least Dinos and eva).

I have my P5K Dluxe but It seems i CANT enable Transaction booster level 1.

Every time I enable boost level 1 all I get is no post and so I need to reboot so it says I have a failed OC BIOS and I just put it in Auto Again.

Why is this happening? I just want to shave some secs @ 32mPi.

What would be other best config for Transaction booster?

System used is:
e4400 @ 3.6ghz 1.55v
2X1GB Team Group OPB Ed (Now 100% stable @ 1,100+ mhz 4-4-4 2.35v)
ASUS P5K Deluxe Wi /Fi 0311 BIOS and RAM in black slots.

Anny suggestions?

BTW, nice forum you have.

Kain

23-07-2007, 09:32 AM #**239** (**permalink**)

Originally Posted by Kain

Hi. Im new to this forum eva 2000 but I bet youve seen me before (At least Dinos and eva). I have my P5K Dluxe but It seems i CANT enable Transaction booster level 1. Every time I enable boost level 1 all I get is no post and so I need to reboot so it says I have a failed OC BIOS and I just put it in Auto Again. Why is this happening? I just want to shave some secs @ 32mPi.
What would be other best config for Transaction booster?
System used is:
e4400 @ 3.6ghz 1.55v
2X1GB Team Group OPB Ed (Now 100% stable @ 1,100+ mhz 4-4-4 2.35v)
ASUS P5K Deluxe Wi /Fi 0311 BIOS and RAM in black slots.

Anny suggestions?
BTW, nice forum you have.
Kain

When Transaction Booster is enabled you MUST disable Static Read Control and vice-versa.
Also acceptable (and a good idea) is the auto option for both of them.

23-07-2007, 12:58 PM #**240** (**permalink**)

Or you could forget about transaction booster and just use Memset Performance Level