You are not registered yet. Please click here to register!
Asus P5K Deluxe - Intel P35 Bearlake + Intel E6600 B1 ES / Q6600 Kentsfield / X6800 - Page 21 - i4memory.com - different look at memory
i4memory.com - different look at memory
Home > Hardware > Motherboards / CPU > Intel motherboards / CPU > Asus Intel motherboards / CPU > Asus P5K Deluxe - Intel P35 Bearlake + Intel E6600 B1 ES / Q6600 Kentsfield / X6800
Tags Register Blogs FAQ Members List Calendar Mark Forums Read


Asus P5K Deluxe - Intel P35 Bearlake + Intel E6600 B1 ES / Q6600 Kentsfield / X6800

This is a discussion on Asus P5K Deluxe - Intel P35 Bearlake + Intel E6600 B1 ES / Q6600 Kentsfield / X6800 within the Asus Intel motherboards / CPU forums, part of the Intel motherboards / CPU category; 2x1GB Twin2X2048-10000C5DF Dominator Asus P5K Deluxe 0311 bios More tests to confirm that indeed black dimm slots on Asus P5K ...

Reply
Page 21 of 38 « First 111617181920 21 222324252631 Last »
 
LinkBack Thread Tools
Old 14-06-2007, 03:30 AM   #161 (permalink)
Administrator
eva2000's PC Specs
 
Join Date: Jul 22 2004
Location: Brisbane, Australia
Posts: 22,181
twitter.com/i4memorycom Facebook Page livestream.com/i4memorycom
Blog Entries: 37
Re: Asus P5K Deluxe - Intel P35 Bearlake + Intel E6600 B1 ES / Q6600 Kentsfield / X68
2x1GB Twin2X2048-10000C5DF Dominator
Asus P5K Deluxe 0311 bios


More tests to confirm that indeed black dimm slots on Asus P5K Deluxe seem to clock these 10000C5D Dominators alot higher with tighter timings and lower vdimm than yellow dimm slots.

System
Corsair 10000C5D Dominators:

Using memtest86+ v1.70:

Yellow slots = 590mhz 5-5-5-18 10-42-10-10-11 at 2.45v memtest semi stable
Black slots = 625mhz 5-5-5-15 3-30-3-3-8 at 2.4v memtest able

In windows had to loosen the subtimings up and drop the clocks a bit for 2.4v vdimm but still @620Mhz 5-5-5-15 8-30-8-8-8 at 2.4v is much better than Yellow slots @590mhz 5-5-5-18 10-42-10-10-11 at 2.45v which was only semi stable in memtest.

JumperFree Configuration Settings
AI Overclocking: Manual
CPU Ratio Control: Manual
- Ratio CMOS Setting: 9
FSB Frequency: 388
PCI-E Frequency: 100
DRAM Frequency: DDR2-1242
DRAM Command Rate: 2T
DRAM Timing Control: Manual
CAS# Latency: 5
RAS# to CAS# Delay: 5
RAS# Precharge: 5
RAS# Activate to Precharge: 15
TWR: 8
TRFC: 30
TWTR: 8
TRRD: 8
TRTP: 8
DRAM Static Read Control: AUTO

Transaction Booster: AUTO
Boost Level: N/A
Clock Over-Charging Mode: AUTO

CPU Spread Spectrum: Disabled
PCIE Spread Spectrum: Disabled

CPU Voltage: 1.475v
CPU Voltage Reference: AUTO
CPU Voltage Damper: Enabled
CPU PLL Voltage: 1.50
DRAM Voltage: 2.4
FSB Termination Voltage: 1.40
North Bridge Voltage: 1.55
North Bridge Voltage Reference: AUTO
South Bridge Voltage: 1.20

Advance CPU Settings
CPU Ratio Control: Manual
- Ratio CMOS Setting: 9
C1E Suppport: Disabled
Max CPUID Value Limit: Disabled
Vanderpool Technology: Disabled
CPU TM Function: Disabled
Execute Disable Bit: Disabled
PECI: Disabled

USB Configuration
USB Functions: Enabled
Legacy USB Support: Disabled (need to enable it to detect USB flash drives)
CPUZ Validation



Everest Ultimate



Short Prime95 v25.2 blend test



Super Pi 32M Single & Dual


Single 32M


Dual 32M

half way mark



Complete



Sandra XI SP2

Buffered



Unbuffered



Latency


Cache & Memory
Last edited by eva2000; 14-06-2007 at 03:21 PM.
eva2000 is offline   Reply With Quote
Old 19-06-2007, 01:36 PM   #162 (permalink)
Junior Member
Vito's PC Specs
 
Join Date: Jun 16 2005
Posts: 27
Re: Asus P5K Deluxe - Intel P35 Bearlake + Intel E6600 B1 ES / Q6600 Kentsfield / X68
eva, any idea on what, "Clock Over-Charging Mode" does?
Is AUTO the best value to set it at?
Also SB, should this be set manually or just left at AUTO for best results?

What is a safe max NB voltage for the stock cooling?
Vito is offline   Reply With Quote
Old 19-06-2007, 01:41 PM   #163 (permalink)
Administrator
eva2000's PC Specs
 
Join Date: Jul 22 2004
Location: Brisbane, Australia
Posts: 22,181
twitter.com/i4memorycom Facebook Page livestream.com/i4memorycom
Blog Entries: 37
Re: Asus P5K Deluxe - Intel P35 Bearlake + Intel E6600 B1 ES / Q6600 Kentsfield / X68
Hi Vito and welcome

Not sure.. i hear it helps with stability at the borderline unstable max clocks ... i leave it at AUTO. SB volts helps max ram clocks sometimes so setting it to 1.05 or 1.20 might help.. use memtest to test and see etc.

probably NB 1.4v would be best ... but i'd put a fan over stock NB heatsink anyway
eva2000 is offline   Reply With Quote
Old 19-06-2007, 01:56 PM   #164 (permalink)
Junior Member
Vito's PC Specs
 
Join Date: Jun 16 2005
Posts: 27
Re: Asus P5K Deluxe - Intel P35 Bearlake + Intel E6600 B1 ES / Q6600 Kentsfield / X68
Thanks, will have a play around a bit more tonight, Only got my P5K-E last night, there doesn't seem to be too much difference between it and the deluxe, so hopefully I can get some good results.

Have you used the 401 official bios? Would be interesting to see if there are any gains. (Edit - my mistake, 401 is for -E only)
Last edited by Vito; 19-06-2007 at 02:02 PM.
Vito is offline   Reply With Quote
Old 19-06-2007, 01:59 PM   #165 (permalink)
Administrator
eva2000's PC Specs
 
Join Date: Jul 22 2004
Location: Brisbane, Australia
Posts: 22,181
twitter.com/i4memorycom Facebook Page livestream.com/i4memorycom
Blog Entries: 37
Re: Asus P5K Deluxe - Intel P35 Bearlake + Intel E6600 B1 ES / Q6600 Kentsfield / X68
latest bios for P5K Deluxe is 0311 AFAIK
eva2000 is offline   Reply With Quote
Old 19-06-2007, 02:15 PM   #166 (permalink)
Junior Member
Vito's PC Specs
 
Join Date: Jun 16 2005
Posts: 27
Re: Asus P5K Deluxe - Intel P35 Bearlake + Intel E6600 B1 ES / Q6600 Kentsfield / X68
Sorry for another noob question, but just trying to get my head around all the voltage options, I'm not sure what the following ones are, and what is too much.

CPU Voltage Reference
CPU PLL Voltage
FSB Termination Voltage
North Bridge Voltage Reference

Thanks.
Vito is offline   Reply With Quote
Old 19-06-2007, 02:20 PM   #167 (permalink)
Administrator
eva2000's PC Specs
 
Join Date: Jul 22 2004
Location: Brisbane, Australia
Posts: 22,181
twitter.com/i4memorycom Facebook Page livestream.com/i4memorycom
Blog Entries: 37
Re: Asus P5K Deluxe - Intel P35 Bearlake + Intel E6600 B1 ES / Q6600 Kentsfield / X68
CPU Voltage Reference
CPU PLL Voltage
FSB Termination Voltage
North Bridge Voltage Reference

All contribute to allowing higher max FSB on cpus.. the NB volts and to an extent the FSB volts depending on cpu used also help with max memory clocks.
eva2000 is offline   Reply With Quote
Old 20-06-2007, 08:52 PM   #168 (permalink)
Junior Member
webwilli's PC Specs
 
Join Date: May 13 2007
Posts: 20
Re: Asus P5K Deluxe - Intel P35 Bearlake + Intel E6600 B1 ES / Q6600 Kentsfield / X68
Bios 0403

http://rapidshare.com/files/38287074/0403.zip.html
webwilli is offline   Reply With Quote
Reply
Page 21 of 38 « First 111617181920 21 222324252631 Last »

Bookmarks

Tags
asus, bearlake, deluxe, e6600, intel, kentsfield, p35, p5k, q6600, x6800

« Previous Thread | Next Thread »

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools


Similar Threads for: Asus P5K Deluxe - Intel P35 Bearlake + Intel E6600 B1 ES / Q6600 Kentsfield / X6800
Thread Thread Starter Forum Replies Last Post
i5 670 & ASUS P7P55D-DELUXE Motherboard 2D review Uncle Fester Asus Intel motherboards / CPU 9 18-03-2010 07:41 AM
Intel Core 2 Quad Q6600 - Kentsfield Preview eva2000 General Intel Motherboards / CPU 57 04-10-2007 05:53 PM
Asus P5K Deluxe (DDR2) / P5K3 Deluxe (DDR3) - Intel P35 Bearlake/ICH9R - Info/Photos eva2000 Asus Intel motherboards / CPU 110 06-08-2007 03:23 AM
Asus P5B Deluxe + E6600/E6700/Q6600 eva2000 Asus Intel motherboards / CPU 114 06-03-2007 02:54 PM
Intel Core 2 Duo E6600 Conroe + Asus P5W DH Deluxe eva2000 Asus Intel motherboards / CPU 132 21-09-2006 02:25 PM


All times are GMT +11. The time now is 02:41 PM.

no new posts