Opteron Socket939 Overclocking Discussion Thread

[eva2000]

of course it's results are guideline as to what the ceiling is...

[ZoKi]

u's are making me all jelous.. 146's are taking there sweet ass time

[eva2000]

yeah i know i still have 2x opteron 146s due from pluscorp but no stock heh

Opteron 144s can keep me occupied for now

[ArcTan]

By eva2000

yeah i know i still have 2x opteron 146s due from pluscorp but no stock heh

Opteron 144s can keep me occupied for now

you have too many toys to play with. I reckon you could loan them to others *cough* FX57 *cough*

[Crocodile]

I received my 150 today and so far so good stability wise.
0534 CABGE SPMW

I had all sorts of trouble getting things to fit today. To cut a long story short im running redlines without a booster so im using a divider till i repair or replace my booster. I attacked this opteron with a BT which contacts my ATi silencer4's rear bracket, even after a severe trimming
So at this stage its stable but at low clocks until my booster is sorted.
The vcore on the DFI NF3 UD is pathetic at best, so im still taking notes on dif settings and results given. eg, stock vcore is 1.27v, set to 1.5v in bios results in 1.39v, 1.5v+0.1 gives 1.44v so it may take a while to collate some usable voltages. I have dropped the voltage to 1.47 atm from my initial testing at 1.53v. Surprising how fast these chips acquire and stop emitting heat, very similar to gpu charactoristics. The air cooling is sufficient for the warm day we had today(17) but expect to be able play some more when the cold of night sets in.
I will update tonight hopefully with some 3gig shots

[ArcTan]

damn that's pretty good from a grbge cpu

[eva2000]

Yeah pretty good but that's probably due to high speed binning for 150s as well

[dinos22]

hmmm priming at 58C....man mine would crap out at 52-53C for sure

Croc run that maxtcase BS proggie and see what it spits out