4GB Corsair PC2-9136C5DF + DFI LT X38-T2R 1/11

eva2000 · 03-05-2008, 01:32 AM

Thanks to Corsair folks, I have the opportunity to take a pair of 2x2GB Corsair PC2-9136 Dominator (TWIN2X4096-9136C5DF) dual channel kit for a test drive

Rated Specifications:

2x 2048MB matched CM2X2048-9136C5D modules
571Mhz or DDR2-1142MHz 5-5-5-15 2T
2.1v
SPD: JEDEC standard 5-5-5-18 values at 800MHz
SPD: EPP standard 5-5-5-15, 2.1V values

The 4GB Corsair PC2-9136 Dominator kit was tested and validated in Corsair's labs using an eVGA 680i SLI nvidia chipset motherboard (P32 bios) and comes with the Corsair Dominator Airflow fan which consists of 3x40mm fans just like the Corsair Dominator PC2-10000C5DF kit.

Viewing Corsair's latest IC inquiry thread listing of ICs, most of Corsair's product lines have transitioned to PSC - powerchip ICs and the 4GB Corsair PC2-9136 Dominators are no exception

System specs

Intel Core 2 Extreme QX9650 L739A640
Thermalright Ultra 120 Extreme + 120x38mm Panaflo 103cfm (MX-2 TIM)
DFI LP LT P38-T2R 1/11 Official bios
128MB Gainward FX5200 PCI
2x2GB Corsair PC2-9136C5DF Dominator dual channel kit (dimm 1+3 slots)
750GB Samsung HD753LJ
Pioneer DVD-RW
620W Corsair HX620
WinXP Pro SP2

Results:

Everest Ultimate SPD settings for modules - looks like week 12, 2008 made with a week 13 packaging date on module's Dominator heatsink label - 08130508 v1.1

I've started testing on DFI LT X38-T2R motherboard with 1/11 official bios and they overclock very easily just by setting memory to 571Mhz 5-5-5-15 and vdimm to 2.10v I was already booting and memtest86+ v2.01 stable!

@585Mhz 5-5-5-15 2.10v

Quick jump to 585Mhz 5-5-5-15 at 2.10v still was easily quad Super Pi 32M stable (hyperpi v0.99 gui wrapper) and single Super Pi 32M stable

click image for full screen shot.

CPUZ Validation

Quad Super Pi 32M

Single Super Pi 32M

Everest Ultimate Bandwidth

Memtest Windows stress test 4x 750MB

Code:

DFI LP LT X38-T2R 1/11 Bios Settings

PC Health Status
Adjust CPU Temp: +6

CPU Feature
- Thermal Management Control: Disabled
-  PPM(EIST) Mode: Disabled
- Limit CPUID MaxVal: Disabled
- CIE Function: Disabled
- Execute Disable Bit: Disabled
- Virtualization Technology: Disabled
- Core Multi-Processing: Enabled

Exist Setup Shutdown: Mode 2
Shutdown after AC Loss: Disabled
CLOCK VC0 divider: AUTO
CPU Clock Ratio Unlock: Enabled
CPU Clock Ratio: 10x
- Target CPU Clock: 3903
N/2 Ratio: Disabled
CPU Clock: 390
Boot Up Clock: AUTO
DRAM Speed: 266/800
- Target DRAM Speed: 1172
PCIE Clock: 100mhz
PCIE Slot Config: 1X 1X

CPU Spread Spectrum: Disabled
PCIE Spread Spectrum: Disabled
SATA Spread Spectrum: Disabled

Voltage Settings
CPU VID Control: 1.3000v
CPU VID Special Add: AUTO
DRAM Voltage Control: 2.10v
SB Core/CPU PLL Voltage: 1.51
NB Core Voltage: 1.517
CPU VTT Voltage: 1.175
Vcore Droop Control: Enabled
Clockgen Voltage Control: 3.45v
GTL+ Buffers Strength: Strong
Host Slew Rate: Weak
GTL REF Voltage Control: Enable
x CPU GTL1/3 REF Volt: 105
x CPU GTL 0/2 REF Volt: 97
x North Bridge GTL REF Volt: 82

DRAM Timing
- Enhance Data transmitting: FAST 
- Enhance Addressing: AUTO
- T2 Dispatch: Disabled 

Clock Setting Fine Delay
Ch1 Clock Crossing Setting: More Aggressive
- DIMM 1 Clock fine delay: 420
- DIMM 2 Clock fine delay: 560
- DIMM 1 Control fine delay: 630
- DIMM 2 Control fine delay: 490
- Ch 1 Command fine delay: 910

Ch2 Clock Crossing Setting: More Aggressive
- DIMM 3 Clock fine delay: 420
- DIMM 4 Clock fine delay: 560
- DIMM 3 Control fine delay: 630
- DIMM 4 Control fine delay: 490
- Ch 2 Command fine delay: 910

Ch1Ch2 CommonClock Setting: More Aggressive

Ch1 RDCAS GNT-Chip Delay: Auto
Ch1 WRCAS GNT-Chip Delay: Auto
Ch1 Command to CS Delay: Auto

Ch2 RDCAS GNT-Chip Delay: Auto
Ch2 WRCAS GNT-Chip Delay: Auto
Ch2 Command to CS Delay: Auto (where cpuz sees 1T or 2T SETTING)

CAS Latency Time (tCL): 5
RAS# to CAS# Delay (tRCD): 5
RAS# Precharge (tRP): 5
Precharge Delay (tRAS): 15
All Precharge to Act: Auto
REF to ACT Delay (tRFC): 52
Performance LVL (Read Delay) (tRD): 6

Read delay phase adjust: Enter

Ch1 Read delay phase (4~0)
- Channel 1 Phase 0 Pull-In: Enabled 
- Channel 1 Phase 1 Pull-In: Enabled
- Channel 1 Phase 2 Pull-In: Enabled
- Channel 1 Phase 3 Pull-In: Enabled
- Channel 1 Phase 4 Pull-In: Enabled

Ch2 Read delay phase (4~0)
- Channel 2 Phase 0 Pull-In: Enabled
- Channel 2 Phase 1 Pull-In: Auto
- Channel 2 Phase 2 Pull-In: Auto
- Channel 2 Phase 3 Pull-In: Auto
- Channel 2 Phase 4 Pull-In: Auto

MCH ODT Latency: Auto
Write to PRE Delay (tWR): 13
Rank Write to Read (tWTR): 11
ACT to ACT Delay (tRRD): Auto
Read to Write Delay (tRDWR): Auto
Ranks Write to Write (tWRWR): Auto
Ranks Read to Read (tRDRD): Auto
Ranks Write to Read (tWRRD): Auto
Read CAS# Precharge (tRTP): Auto
ALL PRE to Refresh: Auto

eva2000 · 03-05-2008, 02:12 AM

Max CPUZ Validation
4GB Corsair PC3-9136C5DF @610Mhz 5-5-5-15 at 2.23v

Using setFSB from 595Mhz 5-5-5-15 at 2.23v in windows I slowly pushed the FSB and thus the memory clocks to 610Mhz 5-5-5-15 at 2.23v for max validation

click image for full screenshot

Max Single Super Pi 32M
4GB Corsair PC3-9136C5DF @595Mhz 5-5-5-15 at 2.23v

Straight boot from bios managed to push the 4GB Corsair PC3-9136C5DF to 595Mhz 5-5-5-15 at 2.23v for single Super Pi 32M pass. Have yet to try quad super Pi or higher vdimm

click image for full screenshot

Code:

DFI LP LT X38-T2R 1/11 Bios Settings

PC Health Status
Adjust CPU Temp: +6

CPU Feature
- Thermal Management Control: Disabled
-  PPM(EIST) Mode: Disabled
- Limit CPUID MaxVal: Disabled
- CIE Function: Disabled
- Execute Disable Bit: Disabled
- Virtualization Technology: Disabled
- Core Multi-Processing: Enabled

Exist Setup Shutdown: Mode 2
Shutdown after AC Loss: Disabled
CLOCK VC0 divider: AUTO
CPU Clock Ratio Unlock: Enabled
CPU Clock Ratio: 10x
- Target CPU Clock: 3973
N/2 Ratio: Disabled
CPU Clock: 397
Boot Up Clock: AUTO
DRAM Speed: 266/800
- Target DRAM Speed: 1193
PCIE Clock: 100mhz
PCIE Slot Config: 1X 1X

CPU Spread Spectrum: Disabled
PCIE Spread Spectrum: Disabled
SATA Spread Spectrum: Disabled

Voltage Settings
CPU VID Control: 1.3375v
CPU VID Special Add: AUTO
DRAM Voltage Control: 2.23v
SB Core/CPU PLL Voltage: 1.51
NB Core Voltage: 1.555
CPU VTT Voltage: 1.175
Vcore Droop Control: Enabled
Clockgen Voltage Control: 3.45v
GTL+ Buffers Strength: Strong
Host Slew Rate: Weak
GTL REF Voltage Control: Enable
x CPU GTL1/3 REF Volt: 105
x CPU GTL 0/2 REF Volt: 97
x North Bridge GTL REF Volt: 82

DRAM Timing
- Enhance Data transmitting: FAST 
- Enhance Addressing: AUTO
- T2 Dispatch: Disabled 

Clock Setting Fine Delay
Ch1 Clock Crossing Setting: More Aggressive
- DIMM 1 Clock fine delay: 420
- DIMM 2 Clock fine delay: 560
- DIMM 1 Control fine delay: 560
- DIMM 2 Control fine delay: 420
- Ch 1 Command fine delay: 910

Ch2 Clock Crossing Setting: More Aggressive
- DIMM 3 Clock fine delay: 420
- DIMM 4 Clock fine delay: 560
- DIMM 3 Control fine delay: 560
- DIMM 4 Control fine delay: 420
- Ch 2 Command fine delay: 910

Ch1Ch2 CommonClock Setting: More Aggressive

Ch1 RDCAS GNT-Chip Delay: Auto
Ch1 WRCAS GNT-Chip Delay: Auto
Ch1 Command to CS Delay: Auto

Ch2 RDCAS GNT-Chip Delay: Auto
Ch2 WRCAS GNT-Chip Delay: Auto
Ch2 Command to CS Delay: Auto (where cpuz sees 1T or 2T SETTING)

CAS Latency Time (tCL): 5
RAS# to CAS# Delay (tRCD): 5
RAS# Precharge (tRP): 5
Precharge Delay (tRAS): 15
All Precharge to Act: Auto
REF to ACT Delay (tRFC): 60
Performance LVL (Read Delay) (tRD): 6

Read delay phase adjust: Enter

Ch1 Read delay phase (4~0)
- Channel 1 Phase 0 Pull-In: Auto
- Channel 1 Phase 1 Pull-In: Enabled
- Channel 1 Phase 2 Pull-In: Enabled
- Channel 1 Phase 3 Pull-In: Enabled
- Channel 1 Phase 4 Pull-In: Enabled

Ch2 Read delay phase (4~0)
- Channel 2 Phase 0 Pull-In: Enabled
- Channel 2 Phase 1 Pull-In: Auto
- Channel 2 Phase 2 Pull-In: Auto
- Channel 2 Phase 3 Pull-In: Auto
- Channel 2 Phase 4 Pull-In: Auto

MCH ODT Latency: Auto
Write to PRE Delay (tWR): 14
Rank Write to Read (tWTR): 11
ACT to ACT Delay (tRRD): Auto
Read to Write Delay (tRDWR): Auto
Ranks Write to Write (tWRWR): Auto
Ranks Read to Read (tRDRD): Auto
Ranks Write to Read (tWRRD): Auto
Read CAS# Precharge (tRTP): Auto
ALL PRE to Refresh: Auto

dinos22 · 06-05-2008, 03:05 PM

lol nice RAM mate

mine OC the same on Gigabyte X38-DQ6

eva2000 · 06-05-2008, 07:27 PM

Yeah saw that very similar in terms of oc'ing both on X38 boards, just mine needed more vdimm for 595mhz maybe due to tighter strap/divider (2:3 vs 5:6) and timings and PL used ?

2good4you · 04-12-2008, 06:05 AM

By eva2000

Yeah saw that very similar in terms of oc'ing both on X38 boards, just mine needed more vdimm for 595mhz maybe due to tighter strap/divider (2:3 vs 5:6) and timings and PL used ?

Which of Corsair Dominator PC8500 2x2GB and Crucial Ballistix Tracer RED PC6400 do you think can reach highest frequency on CL5? I'm using an AMD AM2 system and M2N32-SLI or DKA790GX.

eva2000 · 04-12-2008, 01:39 PM

Welcome... probably best if you posted in AMD DDR2 for non-related question

I'll move your post there after you have a chance to read this reply

I haven't used AM2 system so no idea, for Intel system you'd have a better chance with Crucial IF they're the new 80A revision 2x2GB Crucial Ballistix PC2-6400 new IC revisions are here and not the 804 revision. The Corsair Dominator would be better than old 804 revision crucials.

Similar Threads for: 4GB Corsair PC2-9136C5DF + DFI LT X38-T2R 1/11
Thread	Thread Starter	Forum	Replies	Last Post
[Preview] DFI LP DK P55-T3eH9 + A-Data, Corsair, Gskill P55 DDR3 - discussions	eva2000	DFI Intel Motherboard / CPU	35	04-02-2010 06:37 PM
Initial notes, findings and tips DFI UT X58-T3EH8	eva2000	DFI Intel Motherboard / CPU	0	04-08-2009 03:17 PM
DFI LP X38 or DFI P35 UT T2R?	reNji	General Intel Motherboards / CPU	1	26-01-2008 12:07 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)