sandeep

I have to first figure out how to increase memory speed higher than 1066 in the BIOS.

Ahh figured out, gotta increase HTT!! :-)

erwinz

very nice results.. thanks

anyboy have these new chips on intel setup??

Bold Eagle

I have 2 kits of the older revision, i.e. BL2KIT25664AA804 but one is DS and newer kit is SS and they have fairly different SPD's and were a bit of a pain to get them playing nicely together.







Will pull the HS of the one with clips if you want George and post the info but I don't have any thermal adhesive yet for the other kit. I have a Q6600 with a 975 chipset and it's a been a bit of a bugger to OC.

eva2000

i wouldn't risk pulling off the HS on the newer single sided - they'd be stuck on very well and you might rip off the ICs..

Johnpain

Mine are the best out of 3 ddr2 ram i ever owned they do 1100mhz 2.1v
I tryed 1200 2x2gb with 2.3 but i dont want to heat them up since there new.
But there good EPP 500mhz ddrII-800 on the market.
I got 80A from Scorptech.
The other 2 set of 2x1gb and 4x1gb failed men by not being able to reach 450fsb and i was getting errors in ortho's 440fsb (s)test only my cpu was stable at 440 4 hrs orthos cpu test but not fsb.
Now with these crucial all is fine only mu cpu needs a new cooler cause at 1.29v its hitting 83c
Goodness. But ists stable at 3520mhz and prob more with more volts?
I think its the 4 push pin loos since iv used it on 3 motherboards.

I need a new cooler or brackets.

overclocking101

i have 4 sticks of the 80A's and they oc well i havent tried over 1100mhz yet but they will do that at 5-5-5-18-52-2t easily at 2.08v

eva2000

Hey overclocking101 welcome

They should be good for 550-600mhz

Bold Eagle

I have a kit of SS, the top modules in both pics, above post 11 I don't use anymore and was willing to sell (in Brisbane as I prefer pick up....;-). Has "recent" memtest pics etc.