eva2000

Yup time for a sub 4Ghz Super Pi 32M v1.5 thread

eva2000

Here's a few of my old ones

X6800 @3950Mhz - 10x395FSB
Asus P5B Deluxe 0804 bios
4:5
2GB OCZ PC2-8000 Titanium Alpha VX2 @493Mhz 4-4-3-4 at 2.3v vdimm




X6800 @4000Mhz - 10x400FSB
Asus P5B Deluxe 0804 bios
4:5
2GB OCZ PC2-8000 Titanium Alpha VX2 @500Mhz 4-4-3-4 at 2.3v vdimm



X6800 @3950Mhz - 10x395FSB
Asus 680i Striker Extreme 0402 bios
2:3
2GB OCZ PC2-8000 Titanium Alpha VX2 @592Mhz 5-3-3-5 at 2.5v vdimm



E6700 L629B079 @3900Mhz - 10x390FSB
Asus P5B Deluxe 1101 bios
2:3
2GB OCZ PC2-8000 Titanium Alpha VX2 @585Mhz 4-4-4-4 at 2.66v vdimm (needed to handle tighter CAS4 and tRTP timings)

r3s

I'll have to give this a crack once i setup my peltier and see if i can get some 4ghz stable goodness from my e6700.

What sort of material should i use around the cpu socket?

Last time i installed it i thought the heat on the CPU side would be enough to remove any chance of condensation but on the outer edges i saw that it was still dripping onto the motherboard........ very lucky it is still working

dinos22

ahhh i'll finally be able to give this one a crack with an E6700 coming in soon (fingers crossed it clocks well)

failing that i'll push my E6600 on the P5K mobo with higher memory frequency

RodneyJM

I'll give this a crack with the power sucking L647 E6700 dud I got after Orthos...

dinos22

you reckon it will be able to bench 4GHz 32M

that would be pretty good IMO if you can pull that off

RodneyJM

Well I did some tests last night and found at max Vcore on BFG 680i mobo which is 1.80v (& still on air cooling) it droops to 1.76v. If it did'nt droop then yeah, I reckon 32Mb superpi will be done.

dinos22

GULP 1.76v on air