Crocodile

hmmm The Ch5 is used in the VX32/4000 and it seems to clock higher than the Bh5 with less volts. The RedLine series also use the CH5 over Bh5. The results vary a little depending on chipset and settings, but id say either on a good pcb will do.
What TCC5 have you got, wanna trade for some Value VX Bh5?

KingYubbo

Don't trade your TCC5's. Sell them and buy the Values off Nintek while they last. Stocks of BH-5 are running out on the Values... be quick.

JingJok

I got some OCZ PC4200EL Platinum Rev1.1's 1gig kit as replacement for my old OCZ PC4000EL Gold 2. x 256mb kit which ran like a bag of shat on DFI ( hates Hynix IC's ) Hence my sticking with OCZ for future ram purchases. They were most excellent to RMA the old crapola and give me this sweetness as replacements ( they dont do 2x256 kits no more so upgraded me to 1Gig kit - cheers Sean, John and Markus )

I've had a bit of a play around with these TCC5's and they seem to be quite stable @ 305 in memtest @ 2.5-3-3-8 1T and @ 312 @ 2.5-4-4-8 1T. Im yet to get them stable at those speeds in windows yet. Much over 292 and I get BSOD'd


I like the CH modules though, used to have some Kingston Valueram CH-5 based and they ran sweet at 235fsb with 3.1v on my old vdimm modded NF7-S. Was just curious as to how the UTT based CH goes these days. I been out of the loop on ram for too long. DFI bios scared me when I booted in and saw all the adjustables.......

tHRiCe

Sorry about full pic.

mine do 271 at those timings 1M passable. I'd say perhaps 265 would be 32m stable, but I'm yet to test so no promises

spAm^bOy

Hi,

post no. 1 for me

I've been playing with my new OCZ VVX for about a week now and i'm currently stable in memtest (test #5) @ 255 2-2-2-5 1T with 3.55v.

Pretty impressed with those results!

I might take it down to 250 @ 2-2-2-5 with 3.4v for everyday use though. I love these VVX sticks but it seems they are a little hit and miss in terms of results people are getting.

Moocow

what dfi 4v jumper issue?

fxr91

It is known to kill UTT when using the 4V jumper due to an issue when switching back to pins 1-2 of the jumper block : http://www.i4memory.com/showthread.php?t=440

However the 414 beta BIOS's apparently fixed the issue.

aussie-revhead

What bios does everyone use ? Do you stick with the released versions , or modified ones are OK ? I am using 702-2 but having trouble with stability , memtest , booting etc etc . Everyone else can do it except me .