eva2000

New results on different cpu for 2x 512MB OCZ PC3200 Gold with the new BH5 dies. Original results at OCZ PC3200 Gold new BH5 die + DFI NF4 SLI-D

1. changed cpus from 3500+ CAA2C Clawahammer to 3200+ winnie
2. changed bios from 310 official to 414-3 beta bios allowed me to use Bank Interleave Enabled
3. changed psu from 580W Topower 686P6 to 650 Silverstone PCI-E SLI psu
4. change Forceware drivers from 76.10 to 71.89WHL
5. change everest home from 2.00.292 beta to 2.00.323 beta

The product link is at http://www.ocztechnology.com/product...l_channel_gold



System:
3200+ CBBHD 0445 VPMW water cooled
DFI NF4 SLI-D 414-3 official bios
2x eVGA 6800U PCI-E SLI mode with 71.89WHL drivers
120GB WD 1200JB
Pioneer A05 Burner
650W Silverston Zeus ST65ZF PCI-E SLI psu
WinXP PRO SP2

- note SLI mode will probably reduce cpu related performance slightly so take that into a/c with the benchmark results.

2x 512MB OCZ PC3200 Gold new BH-5 die dual channel kit

@10x 260mhz 2-2-2-5 7-16-3-3-1-2 at 3.6v

chipset = 1.6v
LDT = 1.5v
LDT 4x

CPC = Enabled
CAS Latency(CL) = 2
RAS to CAS(Trcd) = 2
Min RAS# Active time(Tras) = 5
Row Precharge Time(Trp) = 2
Row Cycle Time(Trc) = 7
Row Refresh Cycle Time(Trfc) = 16
Row to Row Delay(Trrd) = 3
Write Recovery Time(Twr) = 3
Write to Read Delay(Twtr) = 1
Read to Write Delay(Trwt) = 2
Refresh Period (Tref) = 0648
Write CAS Latency(Twcl) = Auto
DRAM Bank Interleave = Enabled
Skew = AUTO
Skew Value = 0
DRAM Drive Strength = Level 3
DRAM Data Drive Strength = Level 1
Max Async Latency = 7ns
Read Preamble Time = 5ns
Idle Cycle Limit = 256
Dynamic Counter = Enabled
R/W Queue Bypass = 16x
Bypass Max = 7x
32 byte Granularity = Disable(8burst)

Sandra 2005 Lite
Buffered = 7,355 / 7,293
Unbuffered = 3,573 / 3,781

Everest Home
Read = 7,669
Write = 3,103
Latency = 33.9 ns

Pcmark04 = 4,926
Pcmark04 Memory = 6,651

Hexus Pifast = 45.19s

SuperPi
1M = 32.082s
8M = 5min 46.285s
16M = 13min 08.479s
32M = 28min 37.046s

3dmark2003
@425/1100 stock speeds

1234

sweet! i should get my msi board this week. can test out my stuff, similar setup with an early 3200+ win.

only air though. thinking of going H20, zalman reserator, just looks cool - nothing extreme. have you had one of them?

1234

eva2000

I only water cool my cpu and I have used

1. my G4 Storm/MCP650/Thermochill 120.3 or
2. MCW6002/MCP600/MCP650/Thermochill 120.3 or
3. Corsair Hydrocool 200 external unit.. never used zalman reserator but hear it ain't that good

There's no way i'm going back to air hehe

T_M

That tRAS should be 5

eva2000

doh typo

1234

yeah i have heard that too about zalman reserator - no fans so i wouldn't expect much, i think it was marketed as a quiet cooling system. i'm in no hurry, might buy components over period of time.

1234

KingYubbo

This is the kind of time that you just wish that you had as much knowledge as eva2000

Statts

are you actively cooling this ram at 3.6v?

Chris