Doogs

arctan where did you get the info for this mod?

ArcTan

I think I need a better psu after doing this mod
lol
I don't know how to test my psu with a multimeter so going from everest, 12v is fluctuating alot as well as the 5v and 3.3v is solid with 3.25v and now vdimm is 3.25v as well
only have a antec 430w atm
might get a super flower 500w because of the adjustable pots

Doogs,
I used this image from xtremesystems.org:
http://www4.ncsu.edu/~rwbradl2/Vmods...Vdimm=3.3v.jpg

I connected the furthest of the 3 there just to be sure from looking at a few examples around. It's a very simple mod yet I still did it wrong the first time . Managed to solder the wrong leg before I realised it and fixed it

ArcTan

I think I'll buy a K8NS Ultra as the K8NS-939 I have here totally sucks with the bios. latest bios is F2 whereas the ultra and xp already have F6/F7 or so

groovetek

which model superflower???? my 500w which i purchased couple months back doesn't have adjustable pots - u have to open it up to access it... and that pot doesn't adjust 3.3's... just the +5 and +12.

ArcTan

damn you serious?
might have to get another bloody psu then

Doogs

Arctan the wire can run from any of these 3 points is that right? once done do you only ever get 3.3v? i think i might just grab a booster at some stage, will leave the voltmod for later!

T_M

doogs, yes it will stay at 3.3V unvariable unless you can vary your 3.3V rail (PSU). Although you can easily put a switch inline to turn it off when you dont need 3.3V

Doogs

yeah i actually thought about a switch, hmm i dont know will probably hold off until i have a reason to pull my motherboard out or get lazy and buy a booster! Thanks for the info!!