alpha0ne

A bit lower VID than mine, fingers crossed

dinos22

hey george that's interesting

your version 0.95.4 and 0.94 are reporting the same loaded temps on the quad

iamhurtin

p5k-deluxe, ballistics 4x1gb 1066, ultra 120extreme w/scythe sff21f, p182 top fan on low drawing heat out, rear fan on med drawing air out( air from cooler is being pushed through heatsink into this fan) fan at front of case scythe sff21f blowing in.

Would like to get a small fan to sit on top of the nb, but i need to read how to get it to sit there first. Any suggestions on what way to cool the nb?

Ram is 1:1 470@5-5-5-15. My max ram seems to be555@5-5-5-15 and 470@4-5-5-15

Vcore is at 1.30 in bios 1.28(1.272 Load) showing in cpu-z, nb 1.40, cpu vll 1.50, fsb terminal 1.30

Running prime95 25.4 large fft, over an hour in picture. Hope it goes all night.

Forgot to take a picutre of wprime finishing 1024 in 481

I ran prime for 9hours last night at 450.

I am bit scared to run this fsb at higher multi though, temps are high enough or ready

eva2000

Nice.. high fsb doesn't really mean hotter cpu... only higher vcore = hotter cpu

For NB, get creative with zip ties, clothes hanger wire and pci slot brackets hehe.

iamhurtin

oh cool

at the moment vcore is up from vid

vid=1.2750
value show=1.256

so not to much of an increase from stock
about 3ups in the bios

About northbrige, is 40mm fan big enough to cover it
or should i just a get a mother of a fan in there and dangle it.

H[]R3NDUS

Eva i have noticed if im at 4ghz with my quad at 1.55vcore and wprime then clockgen to say 4300Mhz and wprime my temps rise alot faster than origional 4Ghz boot .

eva2000

i meant the fsb with same cpu clock

i.e.

8x450FSB vs 9x400FSB at same vcore heh

H[]R3NDUS

cheers for clearing my head Eva eheh

i got my multi working on my commando
latest bios worked ,,but when it post it still seems to think its 9x but windows regs as what eva you set