EVGA X58 Classified Overclocking Thread

[G-UNIT91]

Finally I joke with a classy!

but I don't know how keep my Rams over 1000MHz.

You want help me?

[cowie]

i still cant get my chip to like any vvt over 1.30 i'v tried some settings from other users but it just no likey??
dont get me wrong i love my low volt chip but it dont do the 3d tango over 5.0 any suggestions?

[G-UNIT91]

guys, what are your vdroops of Voltage?

[DrNip]

Good question, I will have to check that this weekend.

[G-UNIT91]

By DrNip

Good question, I will have to check that this weekend.

my vtt is very drooped, for example 1,45V-is 1,57V bios relevation

[DrNip]

Well mine is only like 1.45 BIOS is 1.43 Windows. Same for my CPU Volts. My RAM now is like that but on the opposite side of the spectrum. 1.6 BIOS is 1.65 Windows.

[G-UNIT91]

do you have any hidea how I can breake bclk wall +222?

[DrNip]

It might be your CPU holding you back. I boot at 220 BCLK but can't boot 221 or higher. I recently went back with a new line of thinking. Before I couldn't get past 238 BCLK without adjusting the VTT and CPU PWN Frequency to 610/1210 KHz as well as changin the CPU Impedance and QPI Signal to a less setting. This was with a volt setting of:

1.525 CPU Core
1.55 VTT
1.45 IOH
1.55 IOH/ICH IO Voltage
113 PCIE


Well I went back this most recent DICE session with lower VTT. I obtined 244 BCLK with only adjusting these settings:

1.525 CPU Core
1.4 VTT
1.45 IOH
1.55 IOH/ICH IO Voltage
113 PCIE

I didn't have to adjust my VTT and CPU PWN Frequency or CPU Impedance and QPI Signal with lower VTT. I think with a bump up to 1.42 VTT and I could have gone higher. So somethin about lower VTT I was able to obtain higher BCLK with less adjustments. It was that easy, 4 volt adjustments and pcie of 113 gave me 244 BCLK. I am still doing some more testing with the lower VTT setting. I am also going to try lower VCore to see how that effects things.