|
|
28-08-2008, 12:54 AM
#23 (permalink)
|
Sorry to hear about your crucials
654Mhz - 666Mhz 5-5-5-15 at 2.58v bios set
F6K bios seems to be about same as F6H just slightly better as I couldn't get to stable 7.5x534FSB 2.4B 640Mhz 5-5-5-15 on F6H like I did on F6A with these Team PC2-10400 memories. Clock for clock performance is still not where I want it to be for Super Pi, but getting better with each bios release
[Click thumbnail to view full size photo
- use keyboard arrow keys to cycle through images
- click and hold full size photo to drag and move around]
@666Mhz 5-5-5-15 at 2.58v Everest only
@654Mhz 5-5-5-15 at 2.58v - Single & Dual Super Pi 32M stable
Single 32M (left) & Dual 32M via HyperPi (right)
Bios settings used:
Code:
GIGABYTE GA-EP45_EXTREME
MB Intelligent Tweaker(M.I.T.)
Robust Graphics Booster: AUTO
CPU Clock Ratio: 7x
Fine CPU Clock Ratio: [+0.5]
CPU Frequency: 4087Mhz
Clock Chip Control
Standard Clock Control
CPU Host Clock Control: [Enabled]
CPU Host Frequency(Mhz): 545 Mhz
PCI Express Frequency(Mhz): 100 Mhz
C.I.A. 2: [Disabled]
Advanced Clock Control [Press Enter]
CPU Clock Drive: 800mv
PCI Express Clock Drive: 900mv
CPU Clock Skew: 100ps
MCH Clock Skew: 50ps
DRAM Performance Control
Performance Enhance: [Turbo]
Extreme Memory Profile (X.M.P.): Disabled
(G)MCH Frequency Latch: [Auto]
System Memory Multiplier: 2.4B
Memory Frequency (Mhz): 1308Mhz
DRAM Timing Selectable: [Manual]
Standard Timing Control
CAS Latency Time: 5
tRCD: 5
tRP: 5
tRAS: 15
Advanced Timing Control [Press Enter]
tRRD: 5
tWTR: 5
tWR: 13
tRFC: 52
tRTP: 5
Command Rate (CMD): AUTO
>>>>> Channel A
Channel A Timing Settings: [Press Enter]
Static tRead Value: 10
tRD Phase0 Adjustment: Auto
tRD Phase1 Adjustment: Auto
tRD Phase2 Adjustment: Auto
tRD Phase3 Adjustment: Auto
Trd2rd(Different Rank).: Auto
Twr2wr(Different Rank): Auto
Twr2rd(Different Rank): Auto
Trd2wr(Same/Diff Rank): Auto
Dimm1 Clock Skew Control: Auto ps
Dimm2 Clock Skew Control: Auto ps
DDR3 Write Training: Auto
Channel A Driving Settings: [Press Enter]
Driving Strength Profile: AUTO
Data Driving Pull-Up Level: AUTO
Cmd Driving Pull-Up Level: AUTO
Ctrl Driving Pull-Up Level: AUTO
Clk Driving Pull-Up Level: AUTO
Data Driving Pull-Down Level: AUTO
Cmd Driving Pull-Down Level: AUTO
Ctrl Driving Pull-Down Level: AUTO
Clk Driving Pull-Down Level: AUTO
>>>>> Channel B
Channel B Timing Settings: [Press Enter]
Static tRead Value: 10
tRD Phase0 Adjustment: Auto
tRD Phase1 Adjustment: Auto
tRD Phase2 Adjustment: Auto
tRD Phase3 Adjustment: Auto
Trd2rd(Different Rank).: Auto
Twr2wr(Different Rank): Auto
Twr2rd(Different Rank): Auto
Trd2wr(Same/Diff Rank): Auto
Dimm1 Clock Skew Control: Auto ps
Dimm2 Clock Skew Control: Auto ps
DDR3 Write Training: Auto/Enabled/Disabled
Channel B Driving Settings: [Press Enter]
Driving Strength Profile: AUTO
Data Driving Pull-Up Level: AUTO
Cmd Driving Pull-Up Level: AUTO
Ctrl Driving Pull-Up Level: AUTO
Clk Driving Pull-Up Level: AUTO
Data Driving Pull-Down Level: AUTO
Cmd Driving Pull-Down Level: AUTO
Ctrl Driving Pull-Down Level: AUTO
Clk Driving Pull-Down Level: AUTO
Motherboard Voltage Control
CPU Vcore: 1.2500v
CPU Termination | 1.200V: 1.360v
CPU PLL | 1.500V: 1.500v
CPU Reference | 0.760V: 0.866v
CPU Reference2 | 0.800V: 0.881v
MCH Core | 1.100V: 1.600v
MCH Reference | 0.800V: 0.841v
MCH/DRAM Ref | 0.900V: AUTOv
ICH I/O | 1.500V: 1.56v
ICH Core | 1.100V: 1.16v
DRAM Voltage | 1.800V: 2.58v
DRAM Termination | 0.900V: AUTOv
Channel A Reference | 0.900V: AUTOv
Channel B Reference | 0.900V: AUTOv
Advanced Bios Features
Limit CPUID Max. to 3: [Disabled]
No-Execute Memory Protect: [Disabled]
CPU Enhanced Halt (C1E): [Disabled]
C2/C2E State Support: [Disabled]
x C4/C4E State Support: [Disabled]
CPU Thermal Monitor 2(TM2): [Disabled]
CPU EIST Function: [Disabled]
Virtualization Technology.: [Disabled]
Integrated Peripherals
SATA RAID/AHCI Mode: [Disabled]
SATA Port0-3 Native Mode: [Disabled]
USB Controller: [Enabled]
USB 2.0 Controller: [Enabled]
USB Keyboard Support: [Disabled]
USB Mouse Support: [Disabled]
Legacy USB storage detect: [Enabled]