By supershanks 
I just run scheduled backup of my OS. If raid goes faulty or I want to rebvuild I just boot into my OS on the 500gb & rebuild restore image from there. Don't need CD unless I lose raid & 2nd OS.
Thanks for template was just going to do it
Nice might need to follow you lead there.
Gigabyte has released F6K bios with better memory oc'ing support it seems
http://www.giga-byte.com/Support/Mot...ProductID=2860. Just flashed to F6K and will test with this memory that arrived 2x1GB Team PC2-10400 C6
here's F6K bios template, with addition of a new option called DDR3 Write training (this is a DDR2 board typo ? )
Code:
GIGABYTE GA-EP45_EXTREME
MB Intelligent Tweaker(M.I.T.)
Robust Graphics Booster: AUTO
CPU Clock Ratio: 9x
Fine CPU Clock Ratio: [+0.5]
CPU Frequency: Mhz
Clock Chip Control
Standard Clock Control
CPU Host Clock Control: [Enabled]
CPU Host Frequency(Mhz): 333 Mhz
PCI Express Frequency(Mhz): 100 Mhz
C.I.A. 2: [Disabled]
Advanced Clock Control [Press Enter]
CPU Clock Drive: mv
PCI Express Clock Drive: mv
CPU Clock Skew: ps
MCH Clock Skew: ps
DRAM Performance Control
Performance Enhance: [Turbo]
Extreme Memory Profile (X.M.P.):
(G)MCH Frequency Latch: [Auto]
System Memory Multiplier:
Memory Frequency (Mhz): Mhz
DRAM Timing Selectable: [Manual]
Standard Timing Control
CAS Latency Time:
tRCD:
tRP:
tRAS:
Advanced Timing Control [Press Enter]
tRRD:
tWTR:
tWR:
tRFC:
tRTP:
Command Rate (CMD):
>>>>> Channel A
Channel A Timing Settings: [Press Enter]
Static tRead Value: Auto
tRD Phase0 Adjustment: Auto
tRD Phase1 Adjustment: Auto
tRD Phase2 Adjustment: Auto
tRD Phase3 Adjustment: Auto
Trd2rd(Different Rank).: Auto
Twr2wr(Different Rank): Auto
Twr2rd(Different Rank): Auto
Trd2wr(Same/Diff Rank): Auto
Dimm1 Clock Skew Control: Auto ps
Dimm2 Clock Skew Control: Auto ps
DDR3 Write Training: Auto/Enabled/Disabled
Channel A Driving Settings: [Press Enter]
Driving Strength Profile: AUTO/667Mhz/800Mhz/1066Mhz/OC-1200/OC-1333
Data Driving Pull-Up Level:
Cmd Driving Pull-Up Level:
Ctrl Driving Pull-Up Level:
Clk Driving Pull-Up Level:
Data Driving Pull-Down Level:
Cmd Driving Pull-Down Level:
Ctrl Driving Pull-Down Level:
Clk Driving Pull-Down Level:
>>>>> Channel B
Channel B Timing Settings: [Press Enter]
Static tRead Value: Auto
tRD Phase0 Adjustment: Auto
tRD Phase1 Adjustment: Auto
tRD Phase2 Adjustment: Auto
tRD Phase3 Adjustment: Auto
Trd2rd(Different Rank).: Auto
Twr2wr(Different Rank): Auto
Twr2rd(Different Rank): Auto
Trd2wr(Same/Diff Rank): Auto
Dimm1 Clock Skew Control: Auto ps
Dimm2 Clock Skew Control: Auto ps
DDR3 Write Training: Auto/Enabled/Disabled
Channel B Driving Settings: [Press Enter]
Driving Strength Profile: AUTO/667Mhz/800Mhz/1066Mhz/OC-1200/OC-1333
Data Driving Pull-Up Level:
Cmd Driving Pull-Up Level:
Ctrl Driving Pull-Up Level:
Clk Driving Pull-Up Level:
Data Driving Pull-Down Level:
Cmd Driving Pull-Down Level:
Ctrl Driving Pull-Down Level:
Clk Driving Pull-Down Level:
Motherboard Voltage Control
CPU Vcore: v
CPU Termination | 1.200V: v
CPU PLL | 1.500V: v
CPU Reference | 0.760V: v
CPU Reference2 | 0.800V: v
MCH Core | 1.100V: v
MCH Reference | 0.800V: v
MCH/DRAM Ref | 0.900V: v
ICH I/O | 1.500V: v
ICH Core | 1.100V: v
DRAM Voltage | 1.800V: v
DRAM Termination | 0.900V: v
Channel A Reference | 0.900V: v
Channel B Reference | 0.900V: v
Advanced Bios Features
Limit CPUID Max. to 3: [Disabled]
No-Execute Memory Protect: [Disabled]
CPU Enhanced Halt (C1E): [Disabled]
C2/C2E State Support: [Disabled]
x C4/C4E State Support: [Disabled]
CPU Thermal Monitor 2(TM2): [Disabled]
CPU EIST Function: [Disabled]
Virtualization Technology.: [Disabled]
Integrated Peripherals
SATA RAID/AHCI Mode: [Disabled]
SATA Port0-3 Native Mode: [Disabled]
USB Controller: [Enabled]
USB 2.0 Controller: [Enabled]
USB Keyboard Support: [Disabled]
USB Mouse Support: [Disabled]
Legacy USB storage detect: [Enabled]