View Single Post
eva2000
Administrator
 eva2000's Avatar
 
Join Date: Jul 22 2004
Australia
Brisbane, Australia
Posts: 20,978
Blog Entries: 30
eva2000 is offline
Cool DFI Lanparty UT X58-T3EH8 LGA1366 Photos, Bios and Overclocking Information Guide
Old 24-12-2008, 05:02 AM   #1 (permalink)

Finally, the first X58 motherboard to land in my lands happens to be from DFI. The DFI Lanparty UT X58-T3EH8 LGA1366 motherboard for Intel Core i7 processors. If you like this thread, please DIGG it.

Here's some photos to chew on while I set up my first Intel Core i7/X58 system
















First cpus to be tested will be 2x i7 920 - batch = 3836A756






*** Product Specifications ***


CPU
  • LGA 1366 socket for Intel® Core™ i7 processors
  • Intel® QuickPath Interconnect (QPI) technology - point-to-point interface that connects to X58; providing a dynamically scalable interconnect for increased bandwidth, lower latency and stability
  • Integrated Memory Controller (IMC) supports 3 channels of DDR3
  • Intel Hyper-Threading Technology delivers 8-threaded performance
  • 8-phase digital PWM provides stable voltage to the CPU
Chipset
  • Intel chipset
    - Northbridge: Intel X58 Express chipset
    - Southbridge: Intel ICH10R
QPI
  • System bus - 4.8GT/s to 6.4GT/s
System Memory
  • Six 240-pin DDR3 DIMM sockets
  • DDR3 800/1066/1333/1600(O.C.) MHz DIMMs
  • Triple-channel memory architecture
  • Supports up to 24GB system memory
  • Delivers up to 43.2GB/s bandwidth
  • Unbuffered x8/x16, non-ECC and ECC, up to 4Gb DDR3 devices
Expansion Slots
  • 3 PCI Express (Gen 2) x16 slots
    a. 2-way CrossFire at x16/x16 transfer rate lanes; or
    b. 3-way SLI at x16/x8/x8 transfer rate lanes
  • 1 PCI Express x4 slot
  • 2 PCI slots
BIOS
  • Award BIOS
  • 8Mbit SPI flash memory
  • CMOS Reloaded
Graphics
  • Multiple GPUs (Graphics Processing Unit)
    - 3 graphics cards in 3-way SLI or Quad CrossFireX configuration
Audio
  • Bernstein audio module
    - Realtek ALC889 8-channel High Definition Audio CODEC
    - Center/subwoofer, rear R/L and side R/L jacks

    - Line-in, line-out (front R/L) and mic-in jacks
    - 2 coaxial RCA S/PDIF-in/out jacks
    - 1 optical S/PDIF connector
    - 1 CD-in connector
    - 1 front audio connector
  • 108dB Signal-to-Noise ratio (SNR) playback (DAC) quality and 104dB SNR recording (ADC) quality
LAN
  • Marvell 88E8052 and Marvell 88E8053 PCIE Gigabit LAN controllers with Teaming technology
  • Fully compliant to IEEE 802.3 (10BASE-T), 802.3u (100BASE-TX) and 802.3ab (1000BASE-T) standards
Storage
  • Intel ICH10R chip
    - Intel Matrix Storage technology
    - Supports up to 6 SATA devices
    - SATA speed up to 3Gb/s
    - RAID 0, RAID 1, RAID 0+1 and RAID 5
  • JMicron JMB363 PCI Express to SATA and PATA host controller
    - Supports up to 2 UltraDMA 100Mbps IDE devices
    - Supports 2 SATA devices
    - SATA speed up to 3Gb/s
    - RAID 0 and RAID 1
IEEE 1394
  • VIA VT6308P
  • Supports two 100/200/400 Mb/sec IEEE 1394a ports
Rear Panel I/O
  • 1 Mini-DIN-6 PS/2 mouse port
  • 1 Mini-DIN-6 PS/2 keyboard port
  • 1 IEEE 1394 port
  • 6 USB 2.0 ports
  • 2 RJ45 LAN ports
Internal I/O
  • 3 connectors for 6 additional external USB 2.0 ports
  • 1 connector for an external COM port
  • 1 connector for an IEEE 1394 port
  • 1 connector for the Bernstein audio module
  • 1 IrDA connector and 1 CIR connector
  • 8 Serial ATA connectors
  • 1 40-pin IDE connector and 1 floppy connector
  • 1 24-pin ATX power connector
  • 1 8-pin 12V power connector
  • 2 4-pin 5V/12V power connectors (FDD type)
  • 1 front panel connector
  • 8 fan connectors
  • 1 diagnostic LED
  • EZ touch switches (power switch and reset switch)
Power Management
  • ACPI and OS Directed Power Management
  • ACPI STR (Suspend to RAM) function
  • Wake-On-PS/2 / Wake-On-USB Keyboard/Mouse
  • Wake-On-LAN and Wake-On-Ring
  • RTC timer to power-on the system
  • AC power failure recovery
Hardware Monitor
  • Monitors CPU/system/Northbridge temperature and overheat alarm
  • Monitors Vcore/Vdimm/Vnb/VCC5/12V/V5sb/Vbat voltages
  • Monitors the speed of the cooling fans
  • CPU Overheat Protection function monitors CPU temperature and fan during system boot-up - automatic shutdown upon system overheat
PCB
  • 6 layers, ATX form factor;
  • 24.5cm (9.64") x 30.5cm (12")


*** Downloads ***


*** Bios Downloads ***
  • 12/18 Official - first public release bios
  • 12/25 beta - improved DDR3 compatibility
  • 12/31 beta - changed boot logo
  • 01/06 beta
    • Patch some board can not boot up as error code hang "B2"
    • Update Intel CPU micro code
    • Fixed the S3 resume fail when insert Hard Disk to SATA 3/4 port
    • Patch for SetFSB utility can not run
  • 01/14 Official
    • Added Channel and Rank Interleave Setting Item.
    • Modify DMI configure.
    • Fixed QPI Item string error.
    • Fixed ABS Auto upgrade issue.
      Please click here for Update the "LX58D114.ABS" first by Auto Boost system AP file when you changed BIOS version.
      Edit: Please DO NOT update bios until you have read this thread regarding the ABS Profile update requirement for only SOME users. Full details here.
  • 01/23 Beta bios
    • Added Patch 363 Item for SSD issue.
      - Disable for using IDE SSD, Enable(default) for ensure 2 IDE CDROM works
      - SSD will not be an issue in AHCI and RAID mode, only in IDE more where some SSD not able to install OS when in IDE mode on ICH10R due to conflict between SSD firmware and JMB363 initial code. Solution: under Integrated Peripherals -> On chip IDE device -> JMB363 patch (default enabled) set to Disable.
  • 02/06 beta
    1. Update micro code for PCIE root port Max Link Width reported as x4.
    2. Remove floppy B.
    3. Remove Reset Configuration Data Item.
    4. Remove COM by Auto.
    5. Make sure legacy mode only be enabled in IDE mode.
  • 02/17 beta (now official)
    1. CPU shutdown temp use DTS.
    2. Modify “Thermal Management” ?”TDC” and “TDP” function.
    3. Added CPU Die temp item.
    4. Update Intel micro code for new CPUs function.
    2/27 beta
    • Update Intel CPU micro code
  • 5/08 beta (status has changed to official): *** DO NOT load previously saved profiles!!!!! ***
    1. Modify for MEMSET and Elpida chipset DRAM.
    2. Added ch2,ch3 roundtrip.
    3. Patch for winfast TV card issue.
    4. Patch for PCIE RAIDcard issue.
    5. Support ATI HD4890 3Way-CrossFire
  • 06/16 beta:
    1. Fixed VT function to lock for Windows server 2008 Hyper-V
  • 06/19 beta
    1. The BIOS enhanced the DDR3 compatibility and performance issue.
    2. Fixed VT function to lock for Windows server 2008 Hyper-V.
  • 7/24 Official:
    • fixed Windows 7 CPU ratio issue.
  • 11/05 beta:
    • Added VT-d support Item.
    • fixed Windows 7 CPU ratio issue.



*** Smart Guardian Skin Downloads ***

V1


V2

Last edited by eva2000; 11-12-2009 at 02:43 PM..
Reply With Quote